JBL IS5, IS6C, IS6, IS8, IS8C User Manual

...
0 (0)
IS5, IS6, IS8, IS6C, IS8C,
IS6DT
PERFORMANCE
INTEGRA
T
OR
OWNER’S GUIDE
2
INCLUDED
Template/paint
shield. Remove
paint shield
(inner rectan-
gle) at perfora-
tion.
One pair of speakers with
grilles.
Template/paint
shield. Remove
paint shield
(inner circle) at
perforation.
One pair of speakers with
grilles (IS6C and IS8C). Model
IS6DT includes only one loud-
speaker, since it is capable of
reproducing two channels of
audio.
THANK YOU FOR CHOOSING JBL
SPEAKER PLACEMENT
IS5, IS6, IS8
IS6C, IS6DT, IS8C
For more than 60 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to
monitoring the recordings
you play in your home,
car or office.
We’re confident that the
JBL loudspeakers you have
chosen will provide every
note of enjoyment that you
expected – and that when
you think about purchasing
additional audio equipment for
your home, car or office, you
will once again choose JBL.
Please take a moment to
register your product on our
Web site at www.jbl.com. It
enables us to keep you posted
on our latest advancements,
and helps us to better under-
stand our customers and build
products that meet their
needs and expectations.
JBL Consumer Products
Proper placement of the
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of the loud-
speakers. Use these placement
recommendations as a guide.
Slight variations will not dimin-
ish your listening pleasure.
The front speakers should be
placed the same distance from
each other as they are from the
listening position. They should
be placed at about the same
height from the floor as the
listener’s ears will be, with
the tweeters aimed toward the
listener at ear-level height.
In a home theater configuration,
the two surround speakers
should be placed slightly behind
the listening position and ideally
should face each other and be
at a level higher than the lis-
tener’s ears. If that is not possi-
ble, they may be placed in a
wall (or in the ceiling) behind
the listening position, facing for-
ward. The surround speakers
3
4
0
0
60
0
W
ALL
WALL WALL
5
6 ft.
WALL WALL
FRONT SPEAKERS
MODELS IS5, IS6, IS8 AS REAR SPEAKERS
MODEL IS6DT IN-CEILING
The IS6DT has the capability of
playing two channels through
one speaker, thanks to its dual-
tweeter/dual-voice-coil
con-
struction. Since the tweeters are
close together, in general they
should be aimed away from
each other for best coverage.
For two-channel (stereo) appli-
cations, e.g., as a single speaker
in a remote room of a distrib-
uted audio system, install the
IS6DT speaker centrally in the
ceiling for best stereo imaging,
swiveling the tweeters so that
one points toward the left and
the other toward the right of the
listening position, aimed at ear-
level height.
The IS6DT may also be used to
play the left and right surround
channels in a 5.1-channel home
theater system, in which case it
should be mounted in the ceil
-
ing slightly behind the listening
position, centered from left to
right and with the tweeters
pointing toward the left and
right of the listening position,
aimed at ear
-level height.
For 7.1-channel systems where
it is desired to use two IS6DT
speakers, one to play both the
left surround and surround
back channels and the other to
play both the right surround and
surround back channels, mount
each IS6DT speaker in the
ceiling, slightly behind the lis-
tening position. Place one
closer to the left side of the
room and the other closer to
the right side. Aim the tweeters
away from each other, toward
the front and rear of the room.
should not call attention to
themselves. They should
provide a diffuse, ambient
sound accompanying the main
program material heard in the
front speakers. In Dolby
®
Digital
and DTS
®
systems, aim the
tweeters toward the listening
position at ear-level height.
Loading...
+ 5 hidden pages