jbl radial
High Performance Loud Speaker Dock for iPod
®
User Guide
English
Deutsch
Français
Español
Italiano
English
Important Safety Instructions
Please read the following operation precautions before use:
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding type plug. A polarizing plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong, are provided for safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SER VICEABLE PARTS INSIDE THIS UNIT, PLEASE REFER SERVICING TO QUALIFIED HARMAN JBL CORPORATION SERVICE PERSONNEL.
•Never remove grille covers in order to service the speaker system. The speaker system does not contain any user serviceable parts. Refer all servicing to the JBL Technical Support Group.
Important Note For All Electronic Products: Before inserting or unplugging audio cables from the source device’s headphones or line-level output jacks. it is good practice to turn off the device. This will prolong the life of your unit, help protect your device from static electricity. and avoid potential damage.
WARNING: To prevent fire or electrical shock hazard, DO NOT expose this product to rain or moisture.
WARNING: The apparatus should not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, drinking glasses and so forth, should be placed on the apparatus.
WARNING: The apparratus may be static sensitive in some circumstances and may have to be reset after suffering an electrostatic discharge
950-0113-001 1 JBL® Radial Manual
THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF DANGEROUS VOLTAGE INSIDE THE PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT.
SEE MARKING ON BOTTOM OF PRODUCT
REGULATORY
FCC Statement and Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions;
1)This device may not cause interference
2)This device must accept interference, including interference that may cause undesired operation of the device
IC Statement and Warning:
Operation is subject to the following two conditions;
1)This device may not cause interference
2)This device must accept interference, including interference that may cause undesired operation of the device
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES.
950-0113-001 |
2 |
JBL® Radial Manual |
Introduction to your JBL® Radial, High-performance loudspeaker dock for iPod®.
The JBL Radial is the latest innovation from JBL, a long time leader in the manufacturing of high-end, professional component audio systems. JBL’s audio heritage combined with continual research has provided the unique technologies included in the JBL Radial.
JBL Radial is a complete iPod docking sound system. It is the new centerpoint of your personal entertainment space. Imagine a complete subwoofer and satellite sound system in one place, no extra wires running across your table or desk surface. JBL Radial is a compact, total, high performance sound center, controllable by remote up to 20 ft away. Connected to your iPod, MP3 player or any other music source with an audio jack, the Radial will provide clean, powerful sound while providing iPod video pass-through to view your pictures and movies on a TV or monitor. Take complete control of your iPod music and videos with JBL Radial.
Compatibility
The JBL Radial is compatible with all docking versions of the iPod. A stereo mini jack connection also allows you to enjoy high quality audio from a variety of other devices such as, iPod Shuffle, MP3 and CD players, desktop computers (all platforms), satellite radio and laptops.
Remote
Music Controls – Just a touch increases or decreases the volume. Navigation Controls – Browse iPod songs and photos, create play lists, change tracks and settings, and more. With the JBL Radial remote you have complete control of your iPod as though it were in your hand.
S-Video out
With a photo or video iPod docked, you can connect the JBL Radial S-Video output (S-Video cable sold separately) to a compatible TV or monitor to view your pictures larger than life on screen
Additional Features Include;
OnePoint design
The OnePoint iPod connector provides the connection to you computer. Connect the standard USB cable to the rear of the JBL Radial and every time you dock your iPod, you will have the connection needed for synchronizing and charging.
Evercharge Topology - The JBL Radial provides power to charge your iPod even when not connected to the computer or when the system is off.
Compact Design
The JBL Radial is a complete 2.1 channel audio system in one easy to place footprint.
Digital Power and DSP - JBL Radial delivers sound with a powerfully tuned digital audio path. The clean and compact digital amplification coupled with DSP (digital signal processing) equalization efficiently provides radial transducers with cool-running power.
950-0113-001 |
3 |
JBL® Radial Manual |
Advanced Technology
The JBL Radial combines many proprietary technologies to provide the highest quality sound. The JBL Radial will provide astonishing bass and clear accurate sound from any direction.
Halo acousticsTM - The horizontal acoustic level optimization or Halo acoustics design provides a full, rich sound field from any direction. The dual left and right tweeters and down-firing low transducer provides a 360 degree sound field.
HerculesTM and OdysseyTM Transducers – The two full range transducers are driven by powerful Neodymium magnets. The Odyssey tweeters provide accurate high frequencies and Hercules provides a ful, rich frequency response from the lowest bass to the highest vocal range.
COE (Computer Optimized Equalization)
The JBL Radial system equalization is computer optimized to provide a rich, complete sound stage.
OCT (Optimized Compression Topology)
The JBL Radial utilizes a proprietary compression technology to ensure clean accurate sound at high output levels.
Unpacking |
|
Carefully unpack your speaker system and identify all components: |
|
A) JBL Radial unit |
|
B) Power Supply |
|
C) Auxiliary audio cable |
D |
D) USB cable |
E) Remote |
B |
|
|
|
C |
|
E |
|
C |
Volume Control (on base unit)
Volume increase
Volume decrease
950-0113-001 |
4 |
JBL® Radial Manual |
General Setup
1)Unpack the JBL Radial and power supply
2)Place your iPod adapter (included with iPod) into docking station
3)Place the iPod into the adaptor
4)Plug power adaptor into jack marked 24Vdc in
5)Plug adaptor into wall outlet
6)If an additional audio source is used, connect source into Aux In
7)If the use of S-Video out to a TV or monitor is desired, connect with S-Video cable
8)Connect the JBL Radial to a computer with the supplied USB cable for sync and charge functions
9)Install supplied coincell batteries into remote
5
2, 3
6 |
7 |
8 |
4 |
950-0113-001 |
5 |
JBL® Radial Manual |
Listening to music from an iPod:
First locate and place the appropriate corresponding universal iPod adaptor, included with iPod, into JBL Radial iPod docking location, then connect your iPod.
B)Press the “Power” button on the rear of JBL Radial. A blue LED will indicate that the unit is on.
C)Select and play music through your iPod controls or send commands to your iPod with the JBL Remote. ( Refer to JBL Remote user’s guide for more information on the remote)
D)Adjust volume using the “+” and “-“ buttons located on the front of JBL Radial.
Listening to music from an auxiliary device:
The JBL Radial includes a 3.5mm minijack cable for connection to any analog music player with a 3.5mm output.
A)Connect the auxiliary device to the JBL Radial using the supplied 3.5mm audio cable.
B)Press the “Power” button on the rear of JBL Radial. A blue LED will indicate that the unit is on.
C)Control music playback through the auxiliary device
D)Adjust volume using the “+” and “-“ buttons located on the front of JBL Radial.
*Note: iPod input and auxiliary input are mixed, both may play simultaneously.
Viewing photos or videos on a TV/monitor (S-Video cable sold separately):
A)Make sure that the iPod is docked securely in the JBL Radial iPod dock, making sure to use the appropriate adaptor.
B)Connect one end of an S-Video cable (sold separately) to the back of JBL Radial. Connect the other end to a TV/monitor compatible with S-Video input.
C)Press the “Power” button on the rear of JBL Radial. A blue LED will indicate that the unit is on.
D)Control the iPod directly or by using the JBL Radial remote, refer to the JBL Remote user’s guide for more information on the remote, to view photos or videos.
Remote Functionality
For complete remote control functionality please refer to the “JBL Remote control user guide”.
950-0113-001 |
6 |
JBL® Radial Manual |
SYMPTOM |
POSSIBLE PROBLEM |
SOLUTION |
NOTE |
SOUND QUALITY |
|
|
|
|
|
|
|
No sound from JBL Radial |
No power to unit |
Make sure wall power outlet or |
Is the LED On? |
|
|
power strip has power. Make |
|
|
|
sure all switches for outlet / |
If the LED is not on, power is |
|
|
power strip are on and that all |
not getting to your JBL Radial. |
|
|
switches for speaker system |
|
|
|
are on. |
Try the solutions shown. |
|
Incorrect source selection |
Ensure that the iPod is |
|
|
|
properly docked or that the |
|
|
|
auxillary cable is properly con- |
|
|
|
nected to an external audio |
|
|
|
device. |
|
|
|
Turn up the volume. |
|
|
|
Check the system with a |
|
|
|
known good source. |
|
|
|
Connect the aux-in cable to |
|
|
|
the headphone jack on your |
|
|
|
iPod. |
|
Sound only comes from one |
iPod or audio cable is not |
Make sure the iPod or Aux in |
If you are using an extension |
side / channel. |
seated properly. |
cable is seated all the way into |
cable or a third party cable, |
|
|
the JBL Radial. |
make sure it is a stereo |
|
|
|
3.5mm male to male cable. |
Distortion (static, crackling or |
Noise may be caused by |
Turn monitor off to see if noise |
|
hissing sound) |
interference from a monitor, |
is eliminated. |
|
|
cell phone or other transmit- |
|
|
|
ting device. |
Move JBL Radial cables |
|
|
|
farther away from monitor. |
|
950-0113-001 |
7 |
JBL® Radial Manual |
SYMPTOM |
POSSIBLE PROBLEM |
SOLUTION |
NOTE |
SOUND QUALITY |
|
|
|
|
|
|
|
Too much bass or treble |
JBL Radial is being overdriven |
Ensure that the JBL Radial is |
|
|
by an amplified audio source. |
connected to an appropriate |
|
|
|
source device. |
|
|
|
Make sure that all signal |
|
|
|
cables are inserted snugly into |
|
|
|
receptacles. |
|
|
Volume level may be too high |
Check volume of source |
|
|
|
device. |
|
|
|
Some devices will distort the |
|
|
|
output signal if the volume is |
|
|
|
set to maximum. |
|
|
Check the EQ setting on your |
JBL Recommends that the |
|
|
iPod or source device. |
source device EQ be set to |
|
|
|
flat or OFF |
|
|
|
|
|
JBL Radial emits a loud hum |
Input cables not plugged in |
Check input cable connection. |
|
or buzzing noise. |
properly. |
|
|
|
|
|
|
Speaker system experiences |
Input cable may be picking up |
Wrap up excess input cable |
|
radio frequency interference |
interference. |
in order to make as short as |
|
or picks up a radio station. |
|
possible. |
|
950-0113-001 |
8 |
JBL® Radial Manual |
SYMPTOM |
POSSIBLE PROBLEM |
|
SOLUTION |
NOTE |
|
CHARGING SYNCING |
|
|
|
|
|
|
|
|
|
|
|
iPod will not charge |
Wrong adaptor is used. |
|
Ensure correct adaptor is |
|
|
|
|
|
|
used for your specific iPod |
|
|
|
|
|
model. |
|
|
|
|
|
|
|
|
The iPod is not making full |
|
Ensure iPod is seated |
|
|
|
contact with the dock station. |
|
securely into the docking |
|
|
|
|
|
|
station. |
|
iPod is not recognized by the |
Third party accessories may |
|
Make sure you do not have |
|
|
computer when docked into |
be conflicting with the USB or |
|
the JBL Radial connected to a |
|
|
the JBL Radial or there is an |
firwire signal. |
|
|
USB or firewire hub. |
|
error in data transfer. |
|
|
|
Connect the JBL Radial |
|
|
|
|
|
|
|
|
|
|
|
directly into the computers |
|
|
|
|
|
USB or firewire port. |
|
|
USB or firewire port is not |
|
Try connecting the USB or |
|
|
|
supplying enough power |
|
firewire cable to another port |
|
|
|
|
|
|
on the back of the computer. |
|
SPECIFICATIONS |
|
|
|
|
|
Manufacturer |
|
Harman Multimedia |
|
||
Model |
|
JBL Radial |
|
|
|
Driver (Full Range) |
|
Hercules 45mm |
|
||
Drivers (Tweeter) |
|
Odyssey 25mm |
|
||
Power |
|
1 x 30 watts (woofer), |
|
||
Dimensions |
|
2 x 15 watts (tweeters), at 1% THD |
|
||
|
|
|
|
|
|
Width: |
|
12.0 inches |
305mm |
|
|
Depth: |
|
5.25 inches |
135mm |
|
|
Height: |
|
10.5 inches |
270mm |
|
|
Input Impedance |
|
>10k Ohm |
|
|
|
Signal-to-Noise ratio |
|
>85dB |
|
|
|
Frequency Response |
|
70 – 20 kHz |
|
|
|
Input Sensitivity |
|
250 mV rms for rated power output |
|
||
USA/Canada Power |
|
120 volts, 60Hz AC |
|
||
Europe/UK |
|
220-230 volts, 50 or 60 Hz AC |
|
||
Japan |
|
100 volts, 50 or 60 Hz AC |
|
||
Australia |
|
240 volts, 50 or 60 Hz AC |
|
||
Maximum Power Consumption |
55 watts |
|
|
|
UL/CUL/CE Approved
950-0113-001 |
9 |
JBL® Radial Manual |
Deutsch
Wichtige Sicherheitsanweisungen
Bitte lesen Sie vor der Verwendung des Geräts die folgenden Anwendungshinweise
•Lesen Sie diese Anweisungen.
•Bewahren Sie diese Anweisungen gut auf.
•Beachten Sie alle Warnhinweise.
•Befolgen Sie alle Anweisungen.
•Verwenden Sie dieses Gerät nicht in der Nähe von Wasser.
•Verwenden Sie nur ein trockenes Tuch zum Säubern.
•Decken Sie keine der Belüftungsöffnungen ab. Führen Sie die Installation in Übereinstimmung mit den Anweisungen des Herstellers durch.
•Das Gerät darf nicht in der Nähe von Wärmequellen (z.B. Heizkörper, Heizgebläse, Öfen oder andere wärmeabstrahlende Geräte einschließlich Verstärkern) aufgestellt werden.
•Die Schutzvorrichtungen des polarisierten oder geerdeten Netzsteckers dürfen nicht deaktiviert oder umgangen werden. Ein polarisierter Stecker (USA) weist zwei flache Pole auf, von denen einer etwas breiter ist. Ein geerdeter Stecker weist zwei Pole und einen dritten Kontakt zur Erdung auf. Der breitere Pol und der zusätzliche Kontakt dienen der Sicherheit. Wenn der vorhandene Stecker nicht in Ihre Steckdose passt, sollten Sie die veraltete Steckdose durch einen Elektriker ersetzen lassen.
•Verlegen Sie das Netzkabel so, dass es nicht im Weg liegt und insbesondere an den Steckern, beim Einstecken in Verteilerdosen und am Ausgang vom Gerät nicht geknickt wird.
•Verwenden Sie nur die vom Hersteller angegebenen Zusatzgeräte oder Zubehörteile.
•Trennen Sie dieses Gerät bei Gewittern oder bei längerer Nichtbenutzung vom Stromnetz ab.
•Überlassen Sie alle Wartungsaufgaben einem ausgebildeten Techniker. Wartungsmaßnahmen sind erforderlich, wenn das Gerät in irgendeiner Form beschädigt wurde, z.B. wenn das Netzkabel oder der Stecker beschädigt ist, Flüssigkeiten oder Gegenstände in das Geräteinnere eingedrungen sind, das Gerät Regen oder Feuchtigkeit ausgesetzt war, der normale Betrieb gestört ist oder wenn das Gerät fallen gelassen wurde.
•STROMSCHLAGGEFAHR. DIE ABDECKUNG (BZW. DIE RÜCKSEITE) DARF NICHT ABGENOMMEN WERDEN. IM INNEREN DES GERÄTS BEFINDEN SICH KEINE TEILE, DIE VOM BENUTZER GEWARTET WERDEN KÖNNEN. WARTUNGSUND REPARATURMASSNAHMEN DÜRFEN NUR VON QUALIFIZIERTEN SERVICEVERTRETERN DER HARMAN MULTIMEDIA CORPORATION DURCHGEFÜHRT WERDEN.
•Nehmen Sie niemals die Gitterabdeckungen ab, um Servicemaßnahmen am Lautsprechersystem durchzuführen. Das Lautsprechersystem enthält keine Teile, die vom Benutzer gewartet werden können. Überlassen Sie alle Servicemaßnahmen dem technischen Supportteam von Harman Multimedia.
Informationen zur Einstufung auf der Unterseite der Einheit.
Wichtiger Hinweis für alle elektronischen Geräte: Vor dem Anschließen oder Abtrennen von Audiokabeln am Kopfhöreroder Line-Ausgang sollte das Gerät abgeschaltet werden. Diese Maßnahme verlängert die Lebensdauer der Einheit, trägt zum Schutz vor statischer Elektrizität bei und hilft potenzielle Schäden zu verhindern.
WARNUNG: BRANDUND STROMSCHLAGGEFAHR. DIESES GERÄT DARF NICHT REGEN ODER FEUCHTIGKEIT AUSGESETZT WERDEN.
WARNUNG: DAS GERÄT DARF NICHT MIT TROPFODER SPRITZWASSER IN BERÜHRUNG KOMMEN UND AUF DEM GERÄT DÜRFEN KEINE MIT FLÜSSIGKEIT GEFÜLLTEN
GEGENSTÄNDE (VASEN, USW. ) ABGESTELLT WERDEN.
950-0113-001 |
10 |
JBL® Radial Manual |
|
VORSICHT |
|
|
STROMSCHLAGGEFAHR |
|
|
NICHT FFNEN |
|
DAS BLITZSYMBOL |
STROMSCHLAGGEFAHR. |
DAS AUSRUFEE- - |
UND DIE |
DIE ABDECKUNG DARF |
ZEICHEN AUF |
PFEIL-SPITZE AUF |
NICHT ABGENOMMEN |
EINER DREIECKI- |
EINER DREIECKI- |
WERDEN. IM INNEREN DES |
GEN GRUND- |
GEN GRUND- |
GER˜TES BEFINDEN SICH |
FL˜CHE WEIS T |
FL˜CHE WEISEN |
KEINE VOM BENUTZER |
DARAUF HIN, |
DARAUF HIN, |
WARTBAREN TEILE. |
DASS WICHTIGE |
DASS GEF˜HRLI - |
WARTUNGSMA NAHMEN |
ANWEISUNGEN |
CHE SPANNUNG |
D RFEN NUR VON |
ZUM LIEFERUM- |
IM INNEREN DES |
AUGEBILDETEM |
FANG DES |
GER˜TES |
PERSONAL DURCHGE- |
GER˜TES |
ANLIEGT. |
F H RT WERDEN. |
GEH REN. |
SIEHE MARKIERUNG AUF DER UNTERSEITE |
Zulassungen
FCC-Erklärung und Warnung
Bei Tests an diesem Gerät wurde ermittelt, dass es die Grenzwerte laut Teil 15 der FCC-Vorschriften für ein digitales Gerät der Klasse B einhält. Diese Grenzwerte wurden festgelegt, um beim Einsatz in häuslichen Anwendungsbereichen angemessenen Schutz vor Störungen zu gewährleisten. Beim Einsatz dieses Geräts wird Hochfrequenzenergie erzeugt, verwendet und unter Umständen abgestrahlt.
Wenn die Installation und der Gebrauch nicht streng in Übereinstimmung mit den Anweisungen erfolgen, treten eventuell Störungen bei Funkübertragungen auf. Es kann grundsätzlich nicht ausgeschlossen werden, dass in bestimmten Installationen Störungen auftreten. Falls dieses Gerät Störungen des Radiooder Fernsehempfangs verursacht, was durch Einund Ausschalten des Geräts überprüft werden kann, sollten eine oder mehrere der folgenden Maßnahmen zur Behebung des Problems versucht werden:
a)Versuchen Sie, die Empfangsantenne neu auszurichten oder an einer anderen Stelle zu platzieren.
b)Erhöhen Sie den Abstand zwischen dem Gerät und dem Empfänger.
c)Schließen Sie das Gerät und den Empfänger an unterschiedlichen Stromkreisen an.
d)Wenden Sie sich an Ihren Händler oder einen erfahrenen Radiooder Fernsehtechniker.
ÄNDERUNGEN, DIE NICHT AUSDRÜCKLICH VOM HERSTELLER GENEHMIGT WURDEN, KÖNNEN DAZU FÜHREN, DASS DIE LIZENZ ZUR BENUTZUNG DES GERÄTS ENTSPRECHEND DEN FCC-VORSCHRIFTEN ENTZOGEN WIRD.
950-0113-001 |
11 |
JBL® Radial Manual |
Einführung in die Verwendung Ihres JBL Radial, High Performance Lautsprecher-Dock für Ihren iPod®.
JBL Radial ist die neueste Innovation von JBL, einem seit langer Zeit führenden Hersteller von hochwertigen, professionellen Audiosystemkomponenten. JBL’s langjährige Audioerfahrung, kombiniert mit kontinuierlichem Forschungsengagement liefern die einzigartigen Technologien die in JBL Radial zum Einsatz kommen.
JBL Radial ist ein vollständiges iPod-Docking Sound-System. Es ist der neue Mittelpunkt Ihres persönlichen Entertainment Bereichs. Stellen Sie sich ein komplettes Subwoofer/Sateliten Lautsprechersystem in einem einzigen Gerät vor, keine zusätzlichen Kabel mehr die Unordnung auf Ihren Tisch oder Schreibtisch verursachen. JBL Radial ist ein kompaktes und hochleistungsfähiges Soundcenter, welches zudem noch über eine Fernbedienung mit einer Reichweite bis zu 5.5 Meter verfügt. Verbunden mit Ihrem iPod, MP3-Player oder jeder anderen Musikquelle die über eine Audibuchse verfügt, wird Radial Ihnen klaren und leistungsstarken Klang bieten, während es zudem noch die Möglichkeit der Videoübertragung bereitstellt um Ihre Bilder oder Filme auf Ihrem Fernseher oder Monitor anzuschauen. Übernehmen Sie die Kontrolle über Ihre iPod-Musik und -Videos mit JBL Radial.
Kompatibilität
JBL Radial ist kompatibel mit allen Dockingversionen des iPods. Eine Buchse für MiniStereostecker gibt Ihnen außerdem die Möglichkeit den hochwertigen Sound von einer Vielzahl anderer Geräte wie beispielsweise iPod Shuffle, MP3und CD-Player, Desktop-Computer (alle Plattformen), Satellitenradios und Laptops.
Fernbedienung
Musikkontrolle – Eine einfache Berührung genügt bereits um die Lautstärke zu erhöhen oder zu verringern. Navigationskontrolle – navigieren Sie durch Ihre iPod-Songs und -Bilder, erstellen die eine Playlist, wechseln Sie Titel, verändern Sie Einstellungen und vieles mehr. Mit der JBL Radial Fernbedienung haben Sie die absolute Kontrolle über Ihren iPod, so als würden Sie Ihn in der Hand halten.
S- Video-Ausgang
Wenn ein Photooder Video-iPod angeschlossen ist, können Sie den JBL Radial S-Video Ausgang (S-Video Kabel wird separat verkauft) an einen kompatiblen Fernseher oder Monitor anschließen um Ihre Bilder überlebensgroß am Bildschirm anzusehen. Weitere Features
OnePoint-Design
Der OnePoint iPod-Anschluss ermöglicht die Verbindung zu Ihrem Computer. Schließen Sie das Standard USB-Kabel auf der Rückseite Ihres JBL Radial an und jedes Mal wenn die Ihren iPod an die Dockingstation anschließen haben Sie die zur Synchronisation und Aufladung benötigte Verbindung.
Evercharge Topology
JBL Radial versorgt ihren iPod jederzeit mit ausreichend Ladestrom, sogar dann, wenn kein Computer angeschlossen ist oder das System ausgeschaltet ist.
950-0113-001 |
12 |
JBL® Radial Manual |
Kompaktes Design
JBL Radial ist ein vollständiges 2.1 Kanal Audi System auf in einem einzigen Gerät.
Digital Power und DSP – JBL Radial liefert Sound mit einem leistungsstark abgestimmten Audiopfad. Die klare und kompakte digitale Verstärkung verbunden mit DSP- (Digital Signal Processing) Abgleich unterstützt die Energieeffizienz radialer Wandler.
Neueste Technologie
JBL Radial kombiniert viele proprietäre Technologien um die höchst mögliche Klangqualität zu liefern. JBL Radial wird Ihnen erstaunlichen Bass und klaren akkuraten Sound aus jeder Richtung liefern.
Halo Acoustics™
Die Optimierung des horizontalen Akustikniveaus, bzw. das Halo Acoustics-Design sorgt für vollen, reichhaltigen Klang aus allen Richtungen. Die dualen linken und rechten Hochtöner und die horizontalen Wandler im mittleren und unteren Frequenzbereich bieten ein 360° Klangfeld. HerculesTM und OdysseyTM Wandler – Die beiden Vollbereichswandler sind mit leistungsstarken Neodymium - Magneten ausgestattet. Die Odyssey Hochtöner liefern exakte Hochfrequenzen und Hercules liefert eine volle und reichhaltige Frequenzwiedergabe vom niedrigsten Basston bis zu den höchsten Hochtöner.
COE (Computer Optimized Equalization)
Die Entzerrungsfunktion des JBL Radial wurde mittels Computer optimiert, um eine reichhaltige und komplette Klangpräsentation zu ermöglichen.
OCT (Optimized Compression Topology)
JBL Radial nutzt eine proprietäre Kopressionstechnologie, um bei hohem Ausgangsniveau eine saubere, akkurate Klangwiedergabe zu gewährleisten.
Auspacken
Packen Sie das Lautsprecherpaket vorsichtig aus und stellen Sie fest,
ob alle Einzelteile vorhanden sind. |
|
|
A) |
JBL Radial |
D |
B) |
Netzteil |
|
C) Aux - Audiokabel |
B |
|
D) USB - Kabel |
E) Fernbedienung |
C |
|
|
|
E |
|
C |
950-0113-001 |
13 |
JBL® Radial Manual |
Allgemeine Installation
1)Packen Sie JBL Radial und das Netzteil aus.
2)Setzen Sie den iPod-Adapter (Zubehör des iPod) in die Dockingstation ein.
3)Setzen Sie den iPod in den Adapter ein.
4)Schließen Sie das Netzteil an der Buchse mit der Markierung “24Vcd“ an.
5)Schließen Sie das Netzteil an einer Steckdose an.
6)Falls eine zusätzliche Audioquelle verwendet wird, können Sie den Anschluss über “Aux in“ herstellen.
7)Wenn Sie S-Video nutzen möchten, verbinden Sie das Gerät über das S-Videokabel mit dem Fernseher oder Monitor.
8)Um die Synchronisationsund Ladefunktionen zu nutzen, verbinden Sie JBL Radial mit dem Computer über das mitgelieferte USBKabel.
9)Legen Sie die mitgelieferten Knopfzellbatterien in die Fernbedienung ein.
5
2,3
Lautstärkekontrolle (am Gerät selbst)
Lauter
Leiser |
6 |
7 |
8 |
4 |
|
|
|
|
Um Musik von Ihrem iPod zu hören:
A)Wählen Sie zuerst den geeigneten, dazugehörigen universal iPod-Adapter (im Lieferumfang des iPod) aus und setzen Sie diesen in die dafür vorgesehene JBL Radial-Dockingstation ein. Danach setzen Sie ihren iPod in dem Adapter ein.
B)Schalten Sie das Gerät ein, indem Sie auf den Netzschalter auf der Rückseite Ihres JBL Radial drücken. Ein blaues LED wird Ihnen nun anzeigen, dass das Gerät eingeschaltet ist.
C)Wählen Sie die gewünschte Musik aus und spielen Sie diese auf Ihrem iPod ab, indem Sie entweder die iPod Bedienelemente oder Ihre JBL Fernbedienung nutzen.
(Für mehr Informationen über die Fernbedienung, lesen Sie bitte das Benutzerhandbuch der JBL Fernbedienung)
D)Stellen Sie die Lautstärke ein indem Sie die “+” und “-“ Tasten auf der Vorderseite Ihres JBL Radial benutzen.
950-0113-001 |
14 |
JBL® Radial Manual |
Um Musik eines anderen Zusatzgerätes zu hören:
JBL Radial wird mit einem 3.5mm Verbindungskabel mit Miniaturstecker ausgeliefert das es ermöglicht eine Verbindung zu jedem analogen Musikgerät herzustellen, welches über einen 3.5mm Ausgang verfügt.
A)Schließen Sie das Zusatzgerät an Ihr JBL Radial an, indem Sie das mitgelieferte 3.5mm Audiokabel benutzen.
B)Schalten Sie das Gerät ein, indem Sie den Netzschalter auf der Rückseite Ihres JBL Radial betätigen. Ein blaues LED wird Ihnen nun anzeigen, dass das Gerät eingeschaltet ist.
C)Steuern Sie die Musikwiedergabe über das angeschlossene Zusatzgerät.
D)Stellen Sie die Lautstärke ein indem Sie die “+” und “-“ Tasten auf der Vorderseite Ihres JBL Radial benutzen.
*Hinweis: iPod Input und der Input des Zusatzgerätes sind gemischt, gleichzeitiges abspielen könnte auftreten.
Bilder und Videos an einem Fernseher oder Monitor anschauen (S-Videokabel wird separat verkauft):
A)Stellen Sie sicher das der iPod ordnungsgemäß mit dem JBL Radial iPod-Dock verbunden ist. Stellen Sie außerdem sicher, dass sie den korrekten dafür vorgesehenen Adapter benutzen.
B)Schließen Sie ein Ende des S-Videokabel (wird separat verkauft) auf der Rückseite Ihres JBL Radial an. Schließen Sie das andere Ende an einen S-Video Input kompatiblen Fernseher oder Monitor an.
C)Schalten Sie das Gerät ein, indem Sie den Netzschalter auf der Rückseite Ihres JBL Radial betätigen. Ein blaues LED wird Ihnen nun anzeigen, dass das Gerät eingeschaltet ist.
D)Kontrollieren Sie Ihren iPod entweder direkt oder verwenden Sie die JBL Radial Fernbedienung. Für weitere Informationen bezüglich dem Abspielen von Videos oder Bildern, lesen Sie bitte das Benutzerhandbuch der JBL Fernbedienung.
Funktionsweise der Fernbedienung
Für eine vollständige Beschreibung der Fernbedienungsfunktionen lesen Sie bitte das “JBL Fernbedienung Benutzerhandbuch”.
950-0113-001 |
15 |
JBL® Radial Manual |
Problemlösung
SYMPTOM |
MÖGLICHES PROBLEM |
LÖSUNG |
HINWEIS |
TONQUALITÄT |
|
|
|
|
|
|
|
Kein Ton vom JBL Radial. |
Das Gerät wird nicht mit |
Vergewissern Sie sich das |
Ist das Display eingeschaltet? |
|
Strom versorgt. |
die Steckdose bzw. die Ver- |
Wenn das Display nicht einge- |
|
|
teilerdose mit Strom versorgt |
schaltet ist, wird JBL Radial |
|
|
wird. Stellen Sie sicher, dass |
nicht mit Strom versorgt. |
|
|
alle Stromschalter und alle |
Probieren Sie die aufgeführten |
|
|
Schalter am Lautsprechersys- |
Lösungsvorschläge aus. |
|
|
tem eingeschaltet sind. |
|
|
Eine falsche Tonquelle ist |
Stellen Sie sicher, dass der |
|
|
ausgewählt. |
iPod ordnungsgemäß ang- |
|
|
|
eschlossen ist oder dass das |
|
|
|
Zusatzkabel ordnungsgemäß |
|
|
|
mit dem externen Audiogerät |
|
|
|
verbunden ist. |
|
|
|
Erhöhen Sie die Lautstärke. |
|
|
|
Überprüfen Sie das System |
|
|
|
mit einer Quelle/einem Gerät, |
|
|
|
von der/dem Sie wissen |
|
|
|
das es funktionsfähig ist. |
|
|
|
Schließen Sie das Aux-in |
|
|
|
Kabel am Kopfhöreranschluss |
|
|
|
Ihres iPods an. |
|
Ton kommt nur von einer Seite |
Ihr iPod oder das Audiokabel |
Überprüfen Sie den Anschluss |
Falls Sie ein Verlängerungs- |
/ auf einem Kanal. |
ist nicht richtig angeschlossen. |
des iPod bzw. des Audiok- |
kabel bzw. ein Kabel eines |
|
|
ables am JBL Radial. |
Drittanbieters verwenden, |
|
|
|
muss es sich um ein Ste- |
|
|
|
reokabel mit 3.5mmKlinken- |
|
|
|
steckern an beiden Enden |
|
|
|
handeln. |
950-0113-001 |
16 |
JBL® Radial Manual |
SYMPTOM |
MÖGLICHES PROBLEM |
|
LÖSUNG |
HINWEIS |
|
TONQUALITÄT |
|
|
|
|
|
|
|
|
|
|
|
Verzerrung (statische Geräus- |
Die Geräusche können durch |
|
Schalten Sie den Monitor |
|
|
che, Knistern, Rauschen). |
Interferenzen verursacht |
|
aus um festzustellen, ob die |
|
|
|
werden, die von einem |
|
Geräusche verschwinden. |
|
|
|
Monitor, Mobiltelefon oder |
|
Verlegen Sie die Kabel |
|
|
|
einem anderen Gerät mit |
|
des JBL Radial in größerer |
|
|
|
Funkabstrahlung ausgehen. |
|
Entfernung zum Monitor. |
|
|
Zu viel Bass oder Höhen. |
JBL Radial wird von einem |
|
Stellen Sie sicher, dass JBL |
|
|
|
Verstärkersignal übersteuert. |
|
Radial an eine geeignete |
|
|
|
|
|
Audioquelle angeschlossen |
|
|
|
|
|
ist. Überprüfen Sie, ob alle |
|
|
|
|
|
Signalkabel fest in Ihren |
|
|
|
|
|
Buchsen sitzen. |
|
|
|
Die Lautstärke ist möglicher- |
|
Überprüfen Sie die |
|
|
|
weise zu hoch eingestellt. |
|
Lautstärkeeinstellung an der |
|
|
|
|
|
Audioquelle. Bei manchen |
|
|
|
|
|
Geräten kann es zu Verzer- |
|
|
|
|
|
rungen kommen, wenn die |
|
|
|
|
|
maximale Einstellung für das |
|
|
|
|
|
Ausgangssignal gewählt wird. |
|
|
|
Überprüfen Sie die Equalizer- |
|
JBL empfiehlt, eine flache |
|
|
|
Einstellung Ihres iPod bzw. |
|
Equalizer-Einstellung zu |
|
|
|
der verwendeten Audioquelle. |
|
wählen oder den Equalizer |
|
|
|
|
|
auszuschalten. |
|
|
JBL Radial erzeugt ein |
Die Eingangskabel sind nicht |
|
Überprüfen Sie die An- |
|
|
lautes brummendes oder |
korrekt angeschlossen. |
|
schlüsse der Eingangskabel. |
|
|
dröhnendes Geräusch. |
|
|
|
|
|
Das Lautsprechersystem |
Das Eingangskabel empfängt |
|
Wickeln Sie das überschüs- |
|
|
wird durch Radiofrequenzen |
unter Umständen Interfer- |
|
sige Kabel auf, sodass das |
|
|
gestört oder es ist ein Radio- |
enzen. |
|
Kabel zu kurz wie möglich ist. |
|
|
sender zu hören. |
|
|
|
|
|
950-0113-001 |
|
17 |
JBL® Radial Manual |
SYMPTOM |
MÖGLICHES PROBLEM |
LÖSUNG |
HINWEIS |
Aufladen |
|
|
|
Synchronisieren |
|
|
|
|
|
|
|
Der iPod lädt nicht auf. |
Es wird der falsche Adapter |
Vergewissern Sie sich, dass |
|
|
verwendet. |
Sie den richtigen Adapter für |
|
|
Der Kontakt zwischen dem |
Ihr spezielles iPod-Modell |
|
|
iPod und der Dockingstation |
verwenden. |
|
|
ist nicht vollständig hergestellt. |
Stellen Sie sicher, dass der |
|
|
|
iPod fest in der Dockingsta- |
|
|
|
tion sitzt. |
|
Der iPod wird vom Computer |
Zubehör von Drittanbietern |
Achten Sie darauf, dass |
|
nicht erkannt, wenn er im JBL |
wirkt sich unter Umständen |
JBL On Time nicht an einem |
|
On Time in der Dockingstation |
störend auf das USBoder |
USBoder Firewire-Hub |
|
sitzt, oder es ist ein Fehler |
Firewire-Signal aus. |
angeschlossen ist. Schließen |
|
bei der Datenübertragung |
Der USBbzw. Firewire- |
Sie JBL On Time direkt am |
|
aufgetreten. |
Anschluss bietet keine aus- |
USBoder Firewire-Anschluss |
|
|
reichende Stromversorgung. |
Ihres Computers an. |
|
|
|
Versuchen Sie, das USBoder |
|
|
|
Firewire-Kabel an einem |
|
|
|
anderen Anschluss auf der |
|
|
|
Rückseite des Computers |
|
|
|
anzuschließen. |
|
950-0113-001 |
18 |
JBL® Radial Manual |