IOMEGA STORCENTER PRO, STORCENTER PRO NAS 150D 1TB, STORCENTER PRO NAS 150D 2TB, STORCENTER PRO NAS 150D 3TB User Manual

0 (0)
IOMEGA STORCENTER PRO, STORCENTER PRO NAS 150D 1TB, STORCENTER PRO NAS 150D 2TB, STORCENTER PRO NAS 150D 3TB User Manual

StorCenterPro

NAS Server

Quick Start Guide

Guide de démarrage rapide

Schnellstart-Handbuch Guida di installazione rapida Guía de instrucciones rápidas

Quick Install • Installation rapide • Schnellinstallation Installazione rapida • Instalación rápida •

1.Use the included network cable to connect the StorCenter Pro to a network hub or switch.

2.Plug the the StorCenter Pro into an uninterruptible power supply (UPS).

CAUTION! Make sure the voltage on the AC selector switch on the back of the StorCenter Pro matches the power requirements for your country. Make sure power supply switch on the back of the StorCenter Pro is ON.

3.Power on the StorCenter Pro using the power button on the front panel.

4.Insert the Solutions CD. If the CD menu does not launch automatically, double click the CD icon, then double click the Start icon.

5.Click on the Discovery Tool Pro Software button to run the software.

NOTE: The client computer must be on the same subnet or network segment as the StorCenter Pro.

6.The Iomega Discovery Tool Pro software will list all Iomega StorCenter Pro servers on your network segment. Select the StorCenter Pro you would like to configure from the Discovery window, then click the Manage button. Refer to the software help for information on configuration options.

7.Log into the StorCenter Pro. If you are logging in for the first time, leave the user name and password blank.

1.A l’aide du câble réseau inclus, connectez le serveur StorCenter Pro à un commutateur ou concentrateur réseau.

2.Connectez le cordon d’alimentation fourni à l’arrière du système Iomega StorCenter Pro et à un onduleur (UPS).

ATTENTION ! Assurez-vous que la tension indiquée sur le commutateur sélecteur secteur situé à l’arrière du serveur StorCenter Pro correspond à l’alimentation électrique de votre pays. Assurez-vous que l’interrupteur d’alimentation situé à l’arrière du serveur StorCenter Pro est sur ON.

3.Activez votre système StorCenter Pro à l’aide du bouton d’alimentation situé sur le panneau avant.

4.Insérez le CD Solutions. S’il ne démarre pas automatiquement, double-cliquez sur l’icône du CD, puis double-cliquez sur l’icône Start (Démarrer).

5.Cliquez sur le bouton Logiciel Discovery Tool Pro pour exécuter le logiciel.

REMARQUE : l’ordinateur client doit se trouver sur le même segment de réseau ou sous-réseau que

l’ordinateur sur lequel s’exécute Iomega StorCenter Pro.

6.Le logiciel Iomega Discovery Tool Pro répertorie tous les serveurs Iomega StorCenter Pro sur votre segment de réseau. Sélectionnez le système StorCenter Pro

à configurer dans la fenêtre Discovery, puis cliquez sur le bouton Gérer. Reportez-vous à l’aide du logiciel pour plus d’informations sur les options de configuration.

7.Connexion à StorCenter Pro. S’il s’agit de votre première connexion, laissez les champs

correspondant au nom d’utilisateur et au mot de passe vides.

2

1.Verbinden Sie den StorCenter Pro-Server mit dem mitgelieferten Netzwerkkabel mit einem Netzwerk-Hub oder -Switch.

2.Schließen Sie das im Lieferumfang enthaltene Netzkabel an der Geräterückseite und an einer unterbrechungsfreien Stromversorgung (USV) an.

Achtung! Stellen Sie sicher, dass der AC-Wahlschalter auf der Rückseite des StorCenter Pro-Servers auf die richtige Spannung für Ihr Land eingestellt ist. Vergewissern Sie sich, dass sich der Netzschalter an der Rückseite des StorCenter Pro-Servers in der Position ON (Ein) befindet.

3.Schalten Sie den StorCenter Pro mit dem Netzschalter auf der Vorderseite ein.

4.Legen Sie die Solutions-CD ins Laufwerk ein. Falls das Programm nicht automatisch gestartet wird, doppelklicken Sie auf das CD-Symbol. Doppelklicken Sie anschließend auf

Start.

5.Klicken Sie auf die Schaltfläche Discovery Tool Pro Software, um die Software zu starten.

Hinweis: Der Client-Computer muss sich im selben Subnetz oder Netzwerksegment wie das Iomega StorCenter ProGerät befinden.

6.Die Software Iomega Discovery Tool Pro listet alle Iomega StorCenter Pro-Server in Ihrem Netzwerksegment auf. Wählen Sie das StorCenter Pro-Gerät, das Sie über das Discovery-Fenster konfigurieren möchten, und klicken Sie auf die Schaltfläche für die Verwaltung. Informationen zu Konfigurationsoptionen finden Sie in der Hilfe der Software.

7.Melden Sie sich beim StorCenter Pro-System an. Wenn Sie sich das erste Mal anmelden, lassen Sie die Felder für Benutzername und Passwort leer.

1.Utilice el cable de red suministrado para conectar el servidor StorCenter Pro a un concentrador o conmutador de red.

2.Conecte el cable de alimentación suministrado a la parte trasera de Iomega StorCenter Pro y un sistema de alimentación ininterrumpida (UPS).

PRECAUCIÓN: Asegúrese de que el interruptor de selección de CA situado en la parte trasera del servidor StorCenter Pro está en la posición de tensión adecuada para los requisitos de alimentación eléctrica de su país. Asegúrese de que el interruptor de alimentación situado en la parte posterior del servidor StorCenter Pro está en la posición de encendido ON.

3.Encienda StorCenter Pro con el botón de encendido del panel frontal.

4.Introduzca el CD de soluciones. Si la instalación no se inicia automáticamente, haga doble clic en el icono del CD, a continuación, haga doble clic en el icono Start (Iniciar).

5.Haga clic en el botón Discovery Tool Pro Software para ejecutar el software.

NOTA: el equipo cliente debe encontrarse en la misma subred o segmento de red que Iomega StorCenter Pro.

6.El software Iomega Discovery Tool Pro mostrará una lista de todos los servidores de Iomega StorCenter Pro detectados. Seleccione el dispositivo StorCenter Pro que desea configurar en la ventana Discovery y después haga clic en el botón Administrar. Consulte la ayuda del software para obtener información sobre las opciones de configuración.

7.Inicie sesión en StorCenter Pro. Si es la primera vez que inicia sesión, deje el nombre de usuario y la contraseña en blanco.

1.Utilizzare il cavo di rete incluso per collegare l’unità StorCenter Pro Server a un hub o a uno switch di rete.

2.Collegare il cavo di alimentazione incluso alla parte posteriore dell’unità Iomega StorCenter Pro e a un gruppo di continuità (UPS).

ATTENZIONE! Accertarsi che la tensione sull’interruttore di selezione CA situato sul retro dell’unità StorCenter Pro Server corrisponda ai requisiti di alimentazione del proprio paese. Accertarsi che l’interruttore dell’alimentazione situato sul retro dell’unità sia posizionato su ON.

3.Accendere l’unità StorCenter Pro utilizzando il pulsante di accensione situato sul pannello anteriore.

4.Inserire il CD Soluzioni. Se il CD non si avvia automaticamente, fare doppio clic sull’icona del CD, quindi sull’icona di Start (Avvio).

5.Fare clic sul pulsante Software Discovery Tool Pro per eseguire il software.

NOTA: il computer client deve trovarsi sulla stessa sottorete o sullo segmento di rete dell’unità Iomega StorCenter Pro.

6.Il software Iomega Discovery Tool Pro elencherà tutti i server Iomega StorCenter Pro presenti sul segmento di rete. Selezionare l’unità StorCenter Pro da configurare nella finestra Rilevamento, quindi fare clic sul pulsante Gestisci. Per informazioni sulle opzioni di configurazione, fare riferimento alla guida del software.

7.Modalità di accesso all’unità StorCenter Pro. Se si effettua l’accesso per la prima volta, lasciare vuoti i campi del nome utente e della password.

1.StorCenter Pro Server

2.Iomega StorCenter Pro

, (UPS)

! StorCenter Pro Server,

StorCenter Pro Server ON

3.StorCenter Pro

4.CD , Solutions CD ,

5.Discovery Tool Pro Software

: Iomega StorCenter Pro

6.Iomega Discovery Tool Pro SoftwareIomega StorCenter Pro Discovery StorCenter Pro,

7.StorCenter Pro ,

3

Loading...
+ 5 hidden pages