IN32 IN34 IN36
User's Guide
Please read the safety instructions booklet before setting up the projector.
1 |
Unpack the box |
Here's what's included: |
Projector Remote
Carry Case
Registration / Reference guide / Online resources
Register to activate your warranty to ensure eligibilty for service and support, and get special offers and notifications about free product updates.
|
Inscription / Guide de |
|
référence / Ressources en ligne |
|
Activez votre garantie pour avoir |
Reference |
droit aux réparations et à |
l’assistance et obtenir les |
|
guide |
notifications d’offres spéciales et |
languages: |
les avis sur les mises à niveau |
|
gratuites des produits. |
|
Registro / Manual de referencia |
|
/ Recursos en línea |
|
Active la garantía para asegurarse |
|
los beneficios del servicio y soporte |
|
técnico. Reciba ofertas especiales |
Svenska |
y notificaciones sobre las |
actualizaciones gratuitas de |
|
|
nuestros productos. |
|
Registrierung /Referenzanleitung |
|
/ Online-Ressourcen |
|
Aktivieren Sie Ihre Garantie, |
|
sodass Sie für Service und |
|
Unterstützung berechtigt |
|
sind. Sie erhalten |
|
Sonderangebote und |
|
Benachrichtigungen |
|
über kostenlose |
|
Aktualisierun- |
|
gen. |
CD-ROM
Product Registration
and Reference Guide
Lens Cap |
Computer Cable |
Power Cable |
and Tether |
|
|
|
Save the box and packing materials. |
|
2 |
Put batteries in the remote |
||
The remote uses 2 AA batteries. |
|||
|
2 |
- + |
3 |
|
|
+ |
|
Please dispose of batteries in an environmentally proper manner.
Buy a Full-Featured Remote and Other Custom Accessories
www.infocus.com/store
Status Indicator Panel
The top of your projector includes a convenient indicator panel with symbols that light up to show important status.
For details, see Troubleshooting.
Power/Standby Service Required
High Temperature |
Replace Lamp |
3 |
Connect source |
Color-coded connections make it easy. |
You can connect more than one source if needed.
Connect to: Computer Computer
Computer Cable (included)
OR
Got an Apple computer?
You may need an adapter. For more information, see How-To Guides at www.infocus.com/support/howto
USB is optional
USB connection only needed for:
Presentation control using projector remote
Upgrading projector firmware
Connect to: DVD or VCR* (using optional cables)
1 Connect video using either an S-Video or a Composite Video cable
www.infocus.com/store part no. SP-SVIDEO-10M or SP-CPSTVID-5M
2 Connect audio using a Mini-Plug to RCA Audio Y-Cable
Available from A/V dealer or retailer
Composite Video Cable |
Good |
||
OR |
Better |
||
S-Video Cable |
|||
|
|
|
|
Mini-Plug Audio Y-Cable |
|
|
|
|
|
|
|
|
|
|
|
L |
R |
|
|
Audio Out |
Video Out |
DVD or VCR
*Also for game console or cable box.
Want better sound?
Connect the source's audio output to a receiver/amplifier or home theater system with separate speakers.
|
RCA Audio Cable |
|
|
To Projector |
|
|
|
|
or |
L |
R |
L |
R |
|
|
Audio In |
|
Audio Out |
Video Out |
Home Theater or Receiver |
|
DVD or VCR |
OR
Connect to: Other kinds of sources
How-To Guides are available at www.infocus.com/support/howto
4 Turn on projector and source
1 Connect the power cord to the projector
and to an electrical outlet
The power light on the projector will light amber.
2
3
5-10 sec.
Turn on the projector
Press power (on the projector or remote).
The power light will start blinking green.
Wait for the lamp to warm up
After a few seconds, the power light will stop blinking and turn green. It can take a minute for the lamp to reach full brightness.
Warning: Do not look directly into the lens when the projector is turned on.
4 Turn on computer or other source
You may need to press a specific key combination to activate your laptop's external video port. On most laptops, hold down the FN key while pressing a key labeled CRT/LCD, LCD/VGA,
a monitor icon, or similar. Key combos for popular models:
Apple F7 |
Gateway Fn+F3 or Fn+F4 |
IBM ThinkPad Fn+F7 |
Dell Fn+F8 |
HP/Compaq Fn+F4 or Fn+F6 |
Toshiba Fn+F5 |
Fujitsu Fn+F10 |
Sony Fn+F7 |
|
|
|
|
Complete laptop activation chart at www.infocus.com/support |
|
|
|
|
i |
Important: If there is still no video, restart your |
source |
computer (first make sure it's connected to the |
|||
|
|
|
|
projector and the projector is turned on). |
5 Change source if needed
If needed, press source (on the projector or remote) to view the source. You may have to press it more than once.
5 Adjust the picture
1 Height 1
2
1Hold down the release button on top of the projector.
2Lift the front of the projector to the desired height.
3Release the button.
2 Keystone
Press the keystone buttons to make the picture square.
3 Zoom and focus
Focus
Zoom
Adjust zoom first, then focus the center of the image.
Projector Location
As distance increases, the image gets
moves upwards
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diagonal |
Distance to Screen |
|||||
Screen Size |
Minimum |
Maximum |
||||
60" / 1.5m |
7'4" / 2.2m |
9'1" / 2.8m |
||||
80" / 2m |
9'9" / 3m |
12'1" / 3.7m |
||||
92" / 2.3m |
11'3" / 3.4m |
13'11" / 4.2m |
||||
150" / 3.8m |
18'4" / 5.6m |
22'8" / 6.9m |
Interactive Screen Size and
Distance Calculator
www.infocus.com/calculator
Buy a Screen and Other Custom
Accessories www.infocus.com/store
Ceiling mount?
To flip the image, enable Ceiling in the System menu (press menu, then select
Settings > System > Ceiling).
Using the menus
1Press menu to show menus
2Pressorto choose items (or adjust setting)
3Press select to confirm menu choice
4Press menu to hide menus
Controlling your presentations
Connect the computer cable (including USB) to your computer, then use and to move through your presentation slides.
6 Turn off the projector
Press the power button twice
The first press shows a confirmation message; the second press confirms that you want to power off.
The power light on the projector will blink while the fan cools the lamp. If you need to unplug the projector, wait until the fan stops and the power light stops blinking and stays on.
Note: While the power light is blinking, button presses on the projector and remote are ignored.
7 Register your product
Activate your warranty to ensure eligibility for service and support. Get special offers and notifications about free product updates.
1 Write down your projector's serial number
It's printed on the label on the back of the projector. You'll need it to register (and if you ever need to contact support).
Serial number:
2 Go to www.infocus.com/register
8 Read the Reference Guide
Insert the CD-ROM, or go to www.infocus.com/support
The Reference Guide is on the CD-ROM in multiple languages. It covers advanced setup and operation, including lamp replacement instructions. The Reference Guide is also available at www.infocus.com/support
Troubleshooting
If there is no picture or the picture is blank
|
|
|
If the power light is off, make sure the power cord is connected and plugged |
|
|
|
into a live electrical outlet. If the power light is amber and not blinking, press |
|
|
|
the power button. |
|
|
|
Check video source and cables. Make sure the video source (computer, DVD |
|
|
|
player, VCR, etc.) is turned on and cables are securely connected between the |
|
|
|
source and the projector. |
|
|
|
Make sure your computer's video port is enabled. Press the key combination |
|
|
|
that activates your laptop's external video port (see step 4 ). If there is still no |
source |
image, restart your laptop. |
||
|
|||
|
|
|
Press the Source button. You may need to press it several times to view the |
|
|
|
correct source. |
|
|
|
Press the Auto Image button. |
If "Signal out of range" is shown, or the picture looks bad
Press the Auto Image button. If that doesn't help (and the source is a computer), reduce your computer's display resolution or vertical refresh rate.
If the replace lamp light is on
Turn the projector off and wait at least one minute, then turn it on again. If the replace lamp light turns on again, the lamp needs to be replaced. For lamp replacement instructions, see the Reference Guide, which is on the included CD-ROM or can be downloaded at www.infocus.com/support
If the high temperature light is on
Turn the projector off and remove anything that may be blocking the air vents on its side. Leave the projector off for at least one minute to let it cool before turning it on again. IMPORTANT: Continuous operation at high temperature may reduce the lifetime of the lamp and/or projector.
If the service required light is on
Turn the projector off and wait at least one minute, then turn it on again. If the service required light turns on again, the projector needs to be serviced. See below for service contact information.
More troubleshooting options are in the Reference Guide
The Reference Guide is on the included CD-ROM, or download it at www.infocus.com/support
Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector. Keep out of the area under and around the projector when it is turned on. See the safety instructions booklet for more details.
Questions? We’re here to help!
Visit us at: www.infocus.com/support
We’re here to support you with your new purchase. We can help you with…
•Determining screen sizes
•Documentation in other languages
•Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)
•Selecting optional accessories
•Product warranty protection plans
USA, Canada, Latin America |
Asia Pacific |
Europe, Middle East, Africa |
Customer Support Telephone |
Customer Support Telephone |
Customer Support Telephone |
+1 (503) 685-8888 |
Singapore: +65 63539449 |
+31 (0)36 539 2820 |
TOLL FREE: 800-799-9911 |
China: 800.828.2268 |
Mon-Fri, 08:30 - 18:00 CET |
Mon-Fri, 7 am - 5 pm Pacific |
Australia: 1300-725-295 |
emea.support@infocus.com |
techsupport@infocus.com |
Australia Direct Sales: 1800-885-841 |
|
|
Mon-Fri, 9 am - 5 pm SGT |
|
|
asia-support@infocus.com |
|
|
|
|
Warning: Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org
Declaration of Conformity
Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands
We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC, Safety: IEC 60950-1:1st Edition
Trademarks
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. InFocus, In Focus, and INFOCUS (stylized), LP, LiteShow, ScreenPlay, LitePort, ASK and Proxima are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to operate the equipment.
EN 55022 Warning
This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Agency Approvals Product Models: W320, W340, W360
UL, CUL, NOM, IRAM, GOST, C-tick
Other specific Country Approvals may apply. Please see product certification label.
InFocus reserves the right to alter product offerings and specifications at any time without notice.
IN32 IN34 IN36
Reference Guide
Declaration of Conformity
Manufacturer: InFocus Corporation, 27500 SW Parkway Avenue, Wilsonville, Oregon 97070 USA
European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands
We declare under our sole responsibility that this projector conforms to the following directives and norms:
EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022
EN 55024 EN 61000-3-2 EN 61000-3-3
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC
Safety: IEC 60950-1: 1st Edition May, 2004
Trademarks
Microsoft, PowerPoint, Word, Excel and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. Digital Light Processing is a trademark or registered trademark of Texas Instruments. InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by InFocus Corporation may void authority to operate the equipment.
EN 55022 Warning
This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Agency Approvals
UL, CUL, TUV
Other specific Country Approvals may apply, please see product certification label.
This user’s guide applies to models IN32, C175, W320, IN34, C185, W340, IN36, C310, and W360.
InFocus reserves the right to alter product offerings and specifications at any time.
1
Table of Contents
Introduction |
3 |
Connecting a computer |
5 |
Required computer connections |
5 |
Displaying a computer image |
7 |
Adjusting the image |
8 |
Connecting a video device |
9 |
Displaying a video image |
10 |
Shutting down the projector |
12 |
Troubleshooting your setup |
12 |
Using the keypad buttons |
20 |
Using the remote control |
21 |
Using the audio |
22 |
Optimizing computer images |
23 |
Presentation features |
23 |
Optimizing video images |
23 |
Customizing the projector |
23 |
Using the menus |
24 |
Picture menu |
25 |
Settings menu |
28 |
Maintenance |
32 |
Cleaning the lens |
32 |
Using the security lock |
32 |
Replacing the projection lamp |
33 |
Cleaning the lamp filter screens |
35 |
Appendix |
36 |
Projected image size |
36 |
Important Operating Considerations for Safety
•Place the projector in a horizontal position no greater than 15 degrees off axis.
•Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents.
•Locate the projector at least 4' (1.2 m) away from any heating or cooling vents.
•Use only InFocus-approved ceiling mounts.
•Use only the power cord provided. A surge-protected power strip is recommended.
•Refer to this guide for proper startup and shutdown procedures.
•Warning: Hg – Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org.
•In the unlikely event of a lamp rupture, particles may exit through the projector side vents. When the projector is turned on, keep people, food, and drinks out of the "keep out" area under and around the projector, as indicated by the "X" areas below.
|
|
|
|
|
|
3’ |
|
|
|
|
|
|
|
|
|
/ |
|
|
|
|
|
|
|
|
|
1 |
|
|
m |
|
|
|
|
|
|
m |
|
.6 |
|
8’ |
|
|
|
. |
m |
|
/ |
0 |
|
|
|
|
|
|
2’ |
|
|
||
|
/ |
2.4 |
|
5 |
|
|
|
|
|
|
|
1 |
|
|
|
|
|
||
|
|
m |
/ |
|
|
|
|
|
|
|
|
|
’ |
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty booklet.
2
Your new digital projector provides computer and video inputs and has XGA 1024x768 resolution. The projector is easy to connect, easy to use, and easy to maintain.
Product specifications
To read the latest specifications on your multimedia projector, be sure to visit our website at www.infocus.com, as specifications are subject to change.
Accessories
The standard accessories that came with your projector are listed in the included user’s guide. Optional accessories can be found on our website at www.infocus.com or at your retailer or dealer.
Online Registration
Register your projector on our website at www.infocus.com/register to activate your warranty and receive product updates, announcements, and registration incentives.
Projector components and features
keypad
speaker
remote control
receiver (IR)
zoom
elevator foot release
focus
status indicators
IR receiver
connectors
heat vent
leveling IR receiver foot
3
Connector Panel
The projector provides computer and video connectors:
•one M1-D/A (HD, DVI, and computer)
•one VESA (HD, HD component, and computer)
•one VESA (monitor out)
•one S-video
•one composite RCA video
•one audio in/one audio out
It also has an RJ-45 connector for serial control. The Command Line Interface (CLI) specifications and commands are on our website.
Connector panel
M1-D/A |
|
|
composite |
|
RJ-45 serial control |
|
|
||||||
VESA in |
video |
|
|
|
|
||||||||
computer |
|
s-video |
|
|
monitor out |
||||||||
|
|
||||||||||||
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
audio in |
|
power |
lock |
|
external |
||
connector |
||
speaker |
||
|
||
|
(audio out) |
4
Connect the black end of the computer cable to the Computer 1 connector on the projector. Connect the blue end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the monitor cable from the computer’s video port.
Some Macintosh® computers do not have a standard VESA-out video port. If the supplied computer cable will not connect to your computer, purchase the appropriate adapter from your Apple® reseller.
Connect the black power cable to the connector on the back of the projector and to your electrical outlet.
The Power light on the Status Indicator Panel (page 12) turns amber.
NOTE: Always use the power cable that shipped with the projector.
Optional computer connections
To advance slides in a PowerPoint™ presentation using the up and down arrow buttons on the remote, plug the USB connector on the computer cable into the USB mouse connector on your computer.
To have sound with your presentation, connect an audio cable (sold separately) to your computer and to the Audio In connector on the projector.
connect computer cable
connect power cable
connect computer cable
connect audio cable
5
If you are using a desktop computer and want to see the image on your computer screen as well as on the projection screen, plug the monitor cable to the Monitor Out connector on the projector.
If you prefer connecting your projector to your computer with an optional VESA cable, connect one end of the cable to the VESA port on your computer, and connect the other end of the cable to the blue Computer 2 connector on the projector.
You can control the projector from an LCD control panel or computer by connecting an RS-232 cable to the projector’s Serial Control connector. Specific RS-232 commands can be found in the Service and Support section of our website.
connect monitor cable
connect VESA cable
connect RS-232 cable
6