Infinity Beta 20, Beta 50, C250, Beta 10, Beta 40 User Manual

...
4 (1)
Infinity Beta 20, Beta 50, C250, Beta 10, Beta 40 User Manual

INFINITY BETASPEAKER SYSTEMS

Owner’s Guide

Beta 10

Beta 20

Beta 40

Beta 50

Beta C250

Beta C360

INFINITY BETA SERIES

The Infinity BetaSeries of loudspeakers continues Infinity’s longstanding commitment to accurate sound reproduction. Our patented Ceramic

Metal Matrix Diaphragm (CMMD) drivers, precision dividing networks, and rigid, well-braced enclosures, along with our newly developed, patentpending Constant Acoustical Impedance(CAI) waveguide, combine to deliver uncompromised performance in any stereo or multichannel home theater system. In addition, Beta Series speakers are magnetically shielded for safe placement adjacent to a television.

UNPACKING THE SPEAKERS

If you suspect damage from transit, report it immediately to your dealer. Keep the shipping carton and packing materials for future use.

PLACEMENT

Stereo

Before deciding where to place your Beta speakers, survey your room and think about placement, keeping the following points in mind, using Figure 1 as a guide:

• For best results, place the speakers 6'– 8' (1.5m– 2.5m) apart.

Position each speaker so that the tweeter is approximately at ear level.

Generally, bass output will increase as the speaker is moved closer to a wall or corner.

Refer to “Home Theater” below if you also plan to use the speakers for home theater reproduction.

Left

Right

Channel

Channel

Listening Position

Figure 1. Experiment with speaker placement to obtain the best bass level and stereo imaging in your room.

Home Theater

For front-channel use, place one speaker on the left and another on the right, along either side of the television monitor. Since the speakers are magnetically shielded, you can place them near the TV without worrying about the field distorting the TV picture.

For surround-channel use, place speakers on bookshelves or stands alongside the listening position. Final placement depends on room acoustics, availability of space and your listening preference (Figures 2 and 3).

In 6- or 7-channel configurations, place the rear channel(s) behind the listening position, as shown in Figures 2 and 3.

NOTE: An Infinity powered subwoofer will add impact and realism to both music and film soundtracks. Contact your Infinity dealer for recommendations on subwoofer models for your application.

 

 

Infinity Subwoofer

 

 

(optional)

Left

 

Right

Front

 

Front

Channel

Center

Channel

 

 

Channel

Couch

Left

 

 

 

Right

Surround

Left Rear

Center Rear

Right Rear

Surround

Channel

Channel

Channel

Channel

Channel

Figure 2. This overhead view shows a typical home theater plan. Left/right rear channels are for a 7-channel system. Center rear channel is for a 6-channel system.

(optional)

 

 

Right Rear

 

Channel

Left Rear

Center Rear

Channel

Channel

Figure 3. This figure shows an alternate layout, which may be more suitable for some rooms. Left/right rear channels are for a 7-channel system. Center rear channel is for a 6-channel system.

2 BETA SPEAKER SYSTEMS

INSTALLING FEET

Beta 40 and Beta 50

These models feature four rubber feet, which enables them to be placed on a smooth-surfaced floor, such as tile or hardwood. Four metal spikes are supplied for use when the speaker is to be placed on a carpeted surface, to decouple the speaker from the floor and prevent unwanted damping. To insert the spikes, gently lay the speaker on its side (not its front or back) on a soft, nonabrasive surface. Each spike screws into the threaded insert in the center of each rubber foot. Make sure all four spikes are screwed in completely for stability.

NEVER drag the speaker to move it, as this will damage the spikes, the feet and/or the wood cabinet itself. Always lift the speaker and carry it to its new location.

CAUTION: Floorstanding (tower) loudspeakers have a high center of gravity and may become unstable and tip over during earthquakes, or if rocked, tipped or improperly positioned. If this is a concern, these speakers should be anchored to the wall behind them, using the same procedures and hardware customary for anchoring bookcases and wall units. The customer is responsible for proper installation and proper selection of hardware.

BETA SPEAKER SYSTEMS

3

Loading...
+ 5 hidden pages