|
DECLARATION OF CONFORMITY |
|
|
WE |
Hyundai IT COPR. |
|
Ami-ri Bubal-Eub Ichon-Si Gyeonggi-Do |
|
467-860 KOREA |
declare under our sole responsibility that the product:
Kind of equipment : LCD TV
Type-Designation : LT26AW001/LT32DW002/LT37DW000/LT42DW000/LT46DW000
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
Safety : EN60065:2001 / IEC60065 : 2001
EMC : EN 55013 : 2001 + A1: 2003
EN 55022 : 1998 + A1:2000 + A2:2003
EN 55024 : 1998 + A1:2001 + A2:2003
EN 55020 : 2002 + A1:2003
EN 61000-3-2:2000 , EN 61000-3-3:1995+A1:2001
following the provisions of the Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory: TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA /May 8 , 2006 |
BYUNG SUHIN, AHN |
(Place and date of issue) |
( Name and signature of |
authorized person)
Table of Contents
General Information |
|
|
Important Tip/Image Sticking Precaution ............................... |
1 |
|
Safety Precaution |
................................................................. |
2 |
Contents of the Package ....................................................... |
6 |
|
Products Sold Separately ...................................................... |
6 |
|
Parts Names and Functions .................................................. |
7 |
|
Remote Control ................................................................... |
|
11 |
Connections |
|
|
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ............... |
13 |
|
Connecting Antenna input Connection to |
|
|
External Equipments ........................................................... |
13 |
|
Before Connecting the Video/Audio Connections to |
|
|
External Devices... |
.............................................................14 |
|
How to Connect a DTV Receiver or DVD Player .................... |
14 |
|
How to Connect a VCR, Cable Receiver, Camcoder, |
|
|
Game Player ....................................................................... |
|
15 |
How to Connect to a PC ...................................................... |
15 |
|
Scart Connection to the External Input/Output ..................... |
16 |
|
HDMI Connection |
(For HDMI model only) ............................ |
17 |
How to Set the OSD Screen ................................................ |
18 |
|
Picture Setup |
|
|
How to Select the Picture Mode .......................................... |
19 |
|
How to Set the Desired Picture ........................................... |
19 |
|
How to Set the Desired Picture in PC, DVI, |
|
|
HDMI Input Modes |
.............................................................. |
20 |
How to Set Image Adjust in PC Mode .................................. |
20 |
|
How to Select a Color Tone ................................................. |
21 |
|
How to Set the Display Size ................................................ |
21 |
|
How to Set Noise Reduction(NR) ......................................... |
22 |
|
How to Set Film Mode ......................................................... |
22 |
|
Sound Setup |
|
|
How to Select the Audio Mode ............................................ |
23 |
|
How to Adjust the Desired Audio Mode .............................. |
23 |
|
How to Select Auto Volume.................................................. |
24 |
|
How to Select Sound Mode .................................................. |
24 |
|
How to Select Surround ...................................................... |
25 |
|
Channel Setup |
|
How to Fine Tune ................................................................ |
28 |
PIP Setup |
|
How to Set PIP .................................................................... |
28 |
Function Setup |
|
How to Reset ...................................................................... |
30 |
How to Set Clock, Sleep Time, ON/OFF Time ....................... |
30 |
Choosing the your Language ............................................... |
31 |
How to Set OSD Tone ......................................................... |
32 |
How to Set Teletext in ATV .................................................. |
32 |
Selecting Teletext Display Options in ATV Mode .................. |
33 |
How to Set Key-Lock .......................................................... |
33 |
DTV Setup |
|
How to Search Automatically .............................................. |
34 |
How to Search Manually ..................................................... |
34 |
How to Check Channel State ............................................... |
35 |
How to Use the Guide (EPG : Electronic Program Guide) ...... |
36 |
How to Select Channel List ................................................. |
37 |
How to Set Favorite Channel ............................................... |
37 |
How to Use Channel List Mode ........................................... |
38 |
How to Lock Channel .......................................................... |
38 |
How to Set the Channel Order ............................................. |
39 |
How to Delete Channel ....................................................... |
39 |
How to Add Channel ........................................................... |
40 |
How to Factory Set ............................................................. |
40 |
How to Day Light Saving Time(Summer Time) ................... |
41 |
How to TV/RADIO switching ................................................ |
41 |
How to Subtitle / Audio ....................................................... |
42 |
How to Select Channel / Information ................................... |
42 |
How to Set Teletext in DTV ................................................. |
43 |
Appendix |
|
Troubleshooting .................................................................. |
44 |
Product Specifications ........................................................ |
46 |
ENGLISH
How to Select Auto Store ................................................... |
26 |
How to Select Manual Store ................................................ |
26 |
How to Set the Program Edit(Add/Delete,Sort,Name) ........... |
27 |
ENGLISH
General Information
Image Sticking Precaution
When watching a still Image within motion pictures and
Wide/Panorama/Zoom/ /4:3 screen/14:9
Wide,Panorama,Zoom,4:3,14:9, screen
Box still image
1. Note :
-When the central area of the screen and the screen edges are fixed, the different brightness level of the edges may cause image retentions on the edges when watching for a long time
-This phenomenon happens also to products from other manufacturers. Please avoid watching a still image for a long time.
-If you watch a still image for a long time, this may damage your TV.
* This matter does not come under the warranty.
1
General Information
Safety Precaution
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
ENGLISH
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Example of Grounding According to National Electrical Code Instruction
Do not connect multiple electrical appliances to a single outlet.
-It may cause a fire due to overheating from the outlet.
Make sure to remove the speakers before moving the TV with speakers mounted on it.
- When the speakers are detached from the unit while carrying it, this may cause damage to the unit or personal injury.
Do not use or store a flammable spray or inflammable things near the TV.
- They may cause explosion or fire.
Do not install the TV in a bookshelf, closet, or a place with poor air circulation.
-Fire may be caused due to the rise of internal temperature.
Any necessary action such as making the antenna cable loop at the entrance of the building should be taken to prevent rainwater on the outdoor antenna cable from possibly running indoor.
-If raindrop gets into the TV, it may cause a fire or an electric shock.
2
ENGLISH
General Information
Safety Precaution ......................................................................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
If there is a persistent accumulation |
Do not use a damaged power cord |
of dusts or water on the plug, please |
or plug, or loose outlet. |
make sure to wipe it off using a dry |
- It may cause electric shock or fire. |
cloth. |
|
- It may cause a fire or an electric shock. |
|
Firmly plug in the power cord so that it does not pull out.
- An unstable connection may cause fire.
Do not install in a place where there is oil, smoke, excessive humidity, or where water may be sprinkled on it.
- This may cause electric shock or fire.
Do not put a water bowl, vase, candle, bug repellant smoke, cigarette, plants, or heavy thing on the TV.
- It may cause electric shock or fire and also heavy things may cause injury when they fall.
Do not install on an unstable place or small support.
-This may cause the TV to fall, resulting in serious injury especially to children.
Never attempt to open, fix, or modify your TV.
-When there is a need for fixing, call a service center. Fire or electric shock may be caused.
When the TV produces abnormal noise, burning smell, or smoke, unplug the TV immediately and call a service center.
- Electric shock or fire may be caused.
Do not put a metallic object like chopstick, wire, or puncher or inflammables like paper or a match in a vent, headphone jack, or AV jacks of the TV.
- Electric shock or fire may be caused.
3
General Information
ENGLISH
Do not block ventilating slits with a table cloth.
-Blocking the ventilation slits may produce internal heat increase, resulting in a fire.
Please avoid touching the panel at the rear of TV as it is producing high temperature.
-Direct contact with the hot surface may cause physical burns.
Do not place any heat sources such as radiators and heat registers, etc. near the TV.
- It may cause a fire.
Do not place toys and cookies, etc. on the TV, which may attract children’s attention.
-This may cause the TV to fall, resulting in serious injury.
Do not allow children to climb or play on the TV.
-This may cause the TV to fall resulting in serious injury.
When cleaning the TV, make sure to disconnect the power plug and use a dry, soft cloth for a cleanup.
-Please avoid using chemicals such as wax, benzene, alcohol, thinner, mosquito spray, air freshener, lubricant or synthetic detergent.
Unplug when you do not use your TV for a long time.
-If dust is stacked on the TV, electric shock or fire may be caused from heat, fire, or deterioration of insulation.
When moving the TV, two or more people are advised to carry it.
- This may cause damage to the unit or personal injury.
Never touch the power plug or outlet with wet hands.
- This may cause electric shock.
4
General Information
Safety Precaution ......................................................................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
ENGLISH
Unplug the product during lightning or thunderstorms and never touch the antenna cable.
- It may cause a fire or an electric shock.
Do not install the product on the floor.
-This may cause the TV to fall resulting in serious injury.
Keep the remote control batteries out of sight and out reach of children.
-If your child swallows a battery, see your doctor immediately.
When replacing batteries, make sure to match the batteries to the (+) and (-) marks in the battery compartment.
-Mismatching of polarities may result in internal damage to batteries, fire due to leakage or contamination.
Always use the standard batteries and avoid using old batteries together with new ones.
-Otherwise it may result in internal damage to batteries, fire due to leakage or contamination.
In the event of damaging or dropping the product, switch off the power and remove the plug.
-Using a damaged product may cause an electric shock or a fire.
-Contact your local service center.
Before moving the product, ensure to switch off the power and unplug all the electrical cords and the external connection cords such as an antenna cable and other source connections, etc.
-Electrical cords may be damaged, resulting in a fire or an electrical shock.
Consult a service center or customer service for inside cleaning about once a year.
- When dust is piled inside the TV for a long time, fire or malfunction may be caused.
Ensure the power cord doesn’t trail across any hot objects like a heater.
- This may cause a fire or an electric shock.
5
General Information
Contents of the Package
When opening the package, please ensure to check the following accessories.
ENGLISH
Antenna Cable |
Power Cord |
Remote Control & |
User's Guide |
(coaxial cable) |
|
2 batteries (1.5V AAA) |
|
Products Sold Separately
If you want to purchase the following accessories, consult a service center, electronics shops, or parts seller.
Component(Y, Pb, Pr) cable |
Composite(Video & Audio) cable |
DVI PC video(digital) cable |
S-video cable |
PC signal cable |
Scart cable |
HDMI cable |
Audio Cable (DVI/DVD) |
Audio Cable (PC) |
Wall mounting frame |
Wall |
6
General Information
Parts Names and Functions
Front View - E260D/E320D/E370D/E420D/E460D MODEL
ENGLISH
* This product image may be a bit different from the actual product.
Volume buttons
Use these buttons to adjust sound levels. These buttons also serve as the cursors of Select/Adjust in Menu mode.
Channel buttons
Use these buttons to change channels. These buttons also serve as the cursors of Down and Up buttons in Menu mode.
Select button
Use this button to select each item from the menu mode.
Menu button
Use this button to display or exit from the menu mode.
Source button
Use this button to switch among inputs connected to the TV.
Power button
Use this button to turn on or off the TV.
Remote sensor and power LED.
-Point the remote control toward LED.
-It displays standby or operation status.
-Power Indicator Status -
Indicator |
Status |
Red |
Standby |
Green |
Power on |
|
|
Power switch (For 37”/42”/46” model only) Use this switch to turn on/off power.
7
General Information
Rear View - E260D/E320D/E370D/E420D/E460D MODEL
ENGLISH
* This product image may be a bit different from the actual product.
Power switch (For 26”/32” model only) |
Component Audio input terminal |
Power (AC) input terminal |
Video(CVBS) input terminal |
HDMI input terminal |
* Upgrade terminal |
D-SUB input terminal |
Full Scart input terminal |
D-SUB Audio input terminal |
Antenna input terminal |
Video(CVBS) output terminal |
Digital Audio output terminal for coaxial cable |
Audio(CVBS) output terminal |
Half Scart input terminal |
Audio(CVBS/S-Video) input terminal |
SPDIF Optical audio output terminal |
S-Video input terminal |
* Extend an RS-232 input for DTV communication |
* Extend an RS-232 input for ATV communication |
Handler (only for 26 inch) |
|
|
Component Video input terminal |
* * * - it's for technical service do not use at home. |
8
General Information
Front View - E261D/E321D/E371D/E421D/E461D MODEL
ENGLISH
* This product image may be a bit different from the actual product.
Volume buttons
Use these buttons to adjust sound levels. These buttons also serve as the cursors of Select/Adjust in Menu mode.
Channel buttons
Use these buttons to change channels. These buttons also serve as the cursors of Down and Up buttons in Menu mode.
Select button
Use this button to select each item from the menu mode.
Menu button
Use this button to display or exit from the menu mode.
Source button
Use this button to switch among inputs connected to the TV.
Power button
Use this button to turn on or off the TV.
Remote sensor and power LED.
-Point the remote control toward LED.
-It displays standby or operation status.
-Power Indicator Status -
Indicator |
Status |
Red |
Standby |
Green |
Power on |
|
|
Power switch (For 37”/42”/46” model only) Use this switch to turn on/off power.
9
General Information
Rear View - E261D/E321D/E371D/E421D/E461D MODEL
ENGLISH
* This product image may be a bit different from the actual product.
Power switch (For 26”/32” model only) |
Component Audio input terminal |
Power (AC) input terminal |
Video(CVBS) input terminal |
HDMI input terminal |
* Upgrade terminal |
D-SUB input terminal |
Full Scart input terminal |
D-SUB Audio input terminal |
Antenna input terminal |
Video(CVBS) output terminal |
Digital Audio output terminal for coaxial cable |
Audio(CVBS) output terminal |
Half Scart input terminal |
Audio(CVBS/S-Video) input terminal |
SPDIF Optical audio output terminal |
S-Video input terminal |
* Extend an RS-232 input for DTV communication |
* Extend an RS-232 input for ATV communication |
Handler (only for 26 inch) |
|
|
Component Video input terminal |
* * * - it's for technical service do not use at home. |
10
ENGLISH
General Information
Remote Control
|
|
SOURCE |
|
SLEEP |
INFO |
CH-LIST |
GUIDE |
TV/RADIO S.MODE |
|
|
PIP |
|
|
P-SOURCE |
SUB-PR
0
PICTURE |
SOUND |
VOL |
PR |
MUTE |
A/D |
TTX/MIX INDEX LIST/FLOF STORE
STAND ROT
TV VCR DVD SAT SET
1.POWER/STANDBY
2.POWER LED
3.SOURCE
Use this button to select External Input.
4.STILL
5.INFOMATION
Use this button to display resolution or various programs.
6.S-MODE
7.PIP FUNCTIONS
-PIP : Use this button for PIP On/Off.
-PIP SOURCE : Use this button to select the input source of
sub-picture.
8.PIP CHANNEL SELECTION
9.PREVIOUS PROGRAM
10.EXIT
11.MENU SELECTION
Use this button to select menu items.
12. LEFT/RIGHT MOVE/ADJUST
-Use these buttons to move between menu items or adjust each item.
-Use UP/DOWN buttons to select Analog TV channels.
13. SOUND MODE
Use this button to call the OSD on the screen.
14.PROGRAM SELECTION
15.A/D TV
Use this button to switch the input source from analog to digital.
16.AUTO SWIVEL ADJUST (Option)
17.Use this buttons to use other manufacturer’s DVD or VCR.
18.MUTE
19.VOLUME
20.PICTURE MODE
21.MENU
Use this button to call the OSD on the screen.
22.PROGRAM EDIT
23.NUMERIC KEYS
24.ASPECT RATIO
Use this button to change the picture size. 25. Other external device selection(Option)
11
General Information
Teletext & Fastext Function
(See pages 36 for more details.)
3. TV-RADIO
CH-LIST GUIDE TV/RADIO S.MODE
PIP
P-SOURCE
SUB-PR
0
PICTURE |
SOUND |
VOL |
PR |
MUTE A/D
TTX/MIX INDEX LIST/FLOF STORE
1.CH. LIST
To watch the channel list for Digital TV. Press key to confirm or press EXIT to return to previous channels.
2.GUIDE (EPG-Electronic Program Guide)
To watch the program information. Press once more to return to normal mode.
To switch between the TV channel and radio channel for Digital TV.
4.S.MODE
To adjust the subtitle and audio condition/status of the current channel for Digital TV
5.WHITE rubber
DTV : To add a new channel to the Channel List menu.
6. ORANGE rubber
DTV : To see variant channel lists for user’s convenience in the Channel List menu.
7.RED rubber
-DTV : To setup favorite channel lists in the Channel List menu.
-ATV : To delete a channel in the Program Edit menu.
8.GREEN rubber
-DTV : To lock favorite channel lists in the channel list menu.
-ATV : To sort channels in the Program Edit menu.
9.YELLOW rubber
-DTV : To move favorite channel lists in the channel list menu.
-ATV : To edit channel names in the Program Edit menu.
10.BLUE rubber
DTV : To delete a channel from the channel List menu. To show extended program information in the EPG menu.
11. TTX/MIX
To see Teletext Service Data for Analog TV and Digital TV.
ENGLISH
How to Insert Batteries in the Remote Controller
* Battery type :1.5V/AAA
1 |
2 |
3 |
Press and hold part and push to open cover.
Insert batteries with proper polarities of + and -.
Use the remote control with cover closed.
12