HTC IMAGIO WHIT100 User Manual

Size:
3.69 Mb
Download

Getting Started  21

1.7  Home Screen

The Home screen allows finger-touchaccess to the most important functions such as contacts, text messages, email, Internet, and more.

 

Connection status

 

 

Signal strength

 

 

 

 

 

 

 

 

Volume status

 

 

 

 

 

 

 

V CAST Mobile TV status

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notification

 

 

 

 

 

 

 

 

 

 

Battery status

 

 

 

 

 

 

 

 

 

 

Start screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Quick menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Home screen

Open the Phone screen

 

 

 

Lock the phone

 

 

 

 

 

 

 

 

(See Chapter 2 for details)

 

 

 

 

 

 

 

For more information about using the Home screen, see Chapter 3.

22  Getting Started

1.8  Status Icons

The following are some of the status icons that you may see on the phone.

Icons that appear in this area

 

Icons that appear in this area

 

Icons that appear in this area

V CAST Mobile TV available

 

Vibrate mode

 

Battery charging

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V CAST Mobile TV unactivated

 

Sound on

 

Battery full

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery very low

V CAST Mobile TV unavailable

 

Sound off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Icons that appear in this area

Multiple notifications; tap the icon to view all

New text messages;

SMS notification of voice mail

Sending MMS

Receiving MMS

MMS sent

Cannot send MMS

New incoming MMS

Missed call

Speakerphone on

Roaming

Alarm

Other wireless networks detected

Wired headset connected

Bluetooth on

Bluetooth visible mode on

Bluetooth stereo headset connected

Icons that appear in this area

1xRTT available

WCDMA/UMTS available

Connected to a wireless network

Connection is active

Connection is not active

Synchronization in progress

Icons that appear in this area

Data connection present

Maximum signal strength

No signal

Phone is turned off

No phone service

Searching for phone service

Voice call in progress

Call on hold

Calls are forwarded

Getting Started  23

1.9  Notifications

When you tap any of the status icons in the title bar, the Notifications screen opens and displays the remaining battery status, call duration of an ongoing phone call, as well as network connection status, such as Wi-Fi(if your phone is connected to aWi-Finetwork), data connection usage (if your data connection is on), and other types of connections. This screen also shows all your pending notifications including missed calls, new SMS/MMS messages, and more. Tap a status icon or item on the Notifications screen to open the related screen.

Open Comm Manager

Open power settings

Open the related screen or tab.

Dismiss all notifications

Close the Notifications screen

To close the Notifications screen, touch Close or press the BACK button.

1.10  Start Screen

The Start screen, which can be opened by touching Start () on thetop-leftcorner of the screen or by pressing the START () button, gives youone-touchaccess to all the programs and settings of your WindowsMobile-powereddevice. You can also add the shortcut icons of your favorite programs in the Start screen so you can open them quickly.

Open the Start screen.

Open the Home tab. See “Home” in Chapter 3 for details.

Open the Settings tab and adjust device settings.

See “Settings” in Chapter 3 for details.

Swipe upward the screen to view or add more program icons.

Access all programs on your device.

Open the My Favorites tab. Open the Calendar tab.

Open the corresponding program.

Add a program icon.

Remove a program icon.

Note TheHome,My Favorites,Calendar, andSettings icons are permanent icons and cannot be removed or replaced with other program icons.

24  Getting Started

To add a program icon to the Start screen

1.Touch an empty slot to open the Add Program screen that lists all programs on your device.

2.Touch the program you want to add to the Start screen.

3.When you have filled up the current Start screen with programs, scroll down the screen to access more empty slots and add more program icons. To scroll down, press and hold on the screen and then drag your finger upward.

To scroll back up, press and hold on the screen and then drag your finger downward.

To remove or replace a program icon on the Start screen

1.On the Start screen, touch Remove.

2.Touch the program icon you want to remove or replace to clear the slot.

3.Touch Done.

4.If you are replacing the slot with another program icon, follow the steps in “To add a program icon to the Start screen”.

To launch a program

Do any of the following on the Start screen:

Touch the program icon; or

Touch All Applications, and then touch the program in the list.

Tip The programs list is long. If you do not see the desired program on the current screen, drag your finger upward to view more programs

1.11  Quick Menu

The Quick Menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used.

Customize Task Manager settings. (See “Using Task Manager” in Chapter 13.)

Stop all currently running programs.

Touch this icon to open or close the Quick Menu.

Shows the total percentage of program memory in use. Touch to open the Memory settings screen.

To switch to a running program, touch the program name.

To stop a running program, touch .

Getting Started  25

1.12  Lock Screen

The Lock screen is displayed whenever your phone is locked. You can lock your phone to prevent accidental button or touch screen presses when the phone is in your bag or pocket.

Locking your phone

Your phone automatically locks when one of the following occurs:

The display is turned off (automatically or you have pressed the

END/POWER button and selected display off from the Quick Menu ) and your phone goes to sleep mode. See “Switching to Sleep mode” earlier in this chapter for details.

Your phone is password protected, and the set idle time has elapsed. Your phone locks itself and requires the correct password entry to unlock it. For more information about setting a password and idle time for your phone, see “Protecting your phone with a password” in Chapter 13.

You can also lock the phone manually. While on the Home screen, tap Lock, or long press the END/POWER key and selectLock device from the Quick List.

Unlocking your phone

When you see the Lock screen, slide the Lock button ( ) left or right to unlock your phone.

Note If you have set a password for your phone, you will be prompted for the password when you unlock the phone. See “Protecting your phone with a password” in Chapter 13 for information on setting a password.

Checking notifications when the phone is locked

When your phone is locked, you are still notified of missed calls, new messages, and upcoming appointments. The Lock screen shows the next upcoming appointment and the Lock button shows the number of notifications.

To view the notifications

1.On the Lock screen, tap the Lock button ( ). Notification buttons representing each type of received information, such as missed calls, new email, and new text messages, are then displayed below the Lock button.

2.Slide a notification button right or left to view the respective information. For instance, slide the Missed Call button to access the Call History and view missed calls.

Upcoming appointment

Note If a phone password is set, you are prompted for the password before you can view the notification item. See “Protecting your phone with a password” in Chapter 13 for information on setting a phone password.

26  Getting Started

Receiving a call when the phone is locked

You can receive and answer calls even when your phone is locked. For more information about answering calls, see “Answering and Ending Calls“ in Chapter 2.

After you end the call, your phone remains locked and the Lock screen is displayed. You need to unlock to use your phone.

1.13  Adjusting the Volume

A single volume control adjusts both the system volume (notifications and audio/video playback volume) and the phone ring volume of your phone.

To set a single volume

1.Press the VOLUME UP/DOWN button on the left panel of your phone to open the Volume screen.

2.To increase or decrease the volume level, drag your finger up or down the volume bars, or press the VOLUME UP/DOWN button. You can also:

Touch Silent to mute the volume.

Touch Vibrate to switch the phone to Vibrate mode.

3.

The Volume screen automatically closes. You can also tap an

 

Volume

 

empty area of the Volume screen to close it.

 

 

 

bars

Note

Use the VOLUME UP/DOWN button on the left panel of your phone

 

 

 

to adjust the conversation phone volume during an ongoing call.

 

 

To adjust the system and ring volumes separately

1.On the Home screen, slide to the Settings tab, and then touchSound.

2.Turn off the Single Volume option.

3.Press the VOLUME UP/DOWN button.

4.To switch between the Ring Volume and System Volume screens, touch Ring orSystem at the top of the screen.

5.To adjust the volume level, follow steps 2 to 3 in “To set a single volume”.

Getting Started 7

1.14 Using Finger Gestures

You can use finger gestures to scroll and pan on the touch screen.

Finger scrolling

Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more.

When finger scrolling, swipe or flick your finger on the touch screen.

To scroll up and down

To scroll down, swipe your finger upward on the touch screen. To scroll up, swipe your finger downward on the touch screen.

To auto-scroll,flick your finger upward or downward on the touch screen. Touch the screen to stop scrolling.

To scroll left and right

To scroll towards the right, swipe your finger to the left. To scroll towards the left, swipe your finger to the right.

To auto-scroll,flick your finger left or right. Touch the screen to stop scrolling.

Finger panning

You can use finger panning to move to and view other parts of a zoomed photo, web page, document, or an email. To pan, touch and hold on the touch screen and then drag your finger in any direction.

28  Getting Started

1.15  Using the Zoom Bar

The Zoom bar located below the touch screen is a handy zoom control that is unique on your phone. When you are viewing a Web page in the Web browser or a photo in Album, you can zoom in or out by sliding your finger across the Zoom bar.

You can also instantly enlarge or shrink the text size when you open and read messages or Word documents. Slide your finger across the Zoom bar to increase or decrease the text size. To increase or decrease the text size more, slide across the Zoom bar again.

Zoom bar

1.16  Connecting Your Phone to a Computer

Whenever you connect your phone to the computer with the USB cable, the Connect to PC screen displays and prompts you to choose the type of USB connection:

ActiveSync

Select this mode when you need to do the following:

Synchronize Outlook email messages, contacts, calendar appointments, files, and other data between your phone and your computer.

Have read and write access to the whole phone.

For more information about using ActiveSync, see Chapter 5.

Disk Drive

This mode is available for selection only when you installed a microSD card on your phone. Select this mode when you want to use your storage card as a USB thumb drive, and copy files between your phone’s storage card and your computer faster.

When Disk Drive mode is enabled while your phone is connected to the computer:

You will not be able to use your phone to access files from the storage card or run applications that are installed on the storage card.

Your computer will only connect to the phone’s storage card. When you access your phone from the computer, you will only see the contents of the phone’s storage card.

Chapter 2 

Using Phone Features

2.1  Seamless Switching of Networks

Your HTC Imagio™ Global Phone allows you to roam outside of your CDMA network by accommodating a GSM SIM card. Your phone has a SIM card pre-installedand is set to Global mode by default. When the phone is in Global mode it will automatically search for the appropriate network for your location (CDMA or GSM) and connect to it.

If you need to set the phone to connect to CDMA mode only, see “Setting the phone connection to CDMA-onlymode” in this chapter. To set the phone to connect to GSM mode only, see “To change toGSM-onlymode.”

2.2  Making Calls from the Phone Screen

To make a call, you can either dial a number or select a contact you want to call on the Phone screen. To open the Phone screen, press the TALK/SEND button ( ).

The Phone’s Smart Dial feature makes it quick and easy for you to place a call. When you start entering a phone number or contact name, Smart Dial automatically searches and sorts the contacts in Contacts, and the phone numbers in Call History (incoming, outgoing, and missed calls). You can then select the desired number or contact from the filtered list.

You can just enter the first letter of the name or number of a contact. Smart Dial searches for contact phone numbers and the first character of a contact name as well as from the character that appears after a space, dash, or underscore in a contact name.

To call a phone number or contact

1.Begin entering the first few numbers or characters by tapping the keys on the Phone keypad. As you enter numbers or letters, the Smart Dial panel displays matches found.

If you tap a wrong number or character, tap to erase each subsequent digit or character. To erase the entire entry, tap and hold.

2.Tap to close the phone keypad and to see if there are more matching numbers or contacts in the Smart Dial panel. To browse through the filtered list, flick through the list or slide your finger up or down the list slowly.

Add the number to your

Smart Dial contacts. panel

Open the contact details.

Tap to open or close the phone keypad.

30  Using Phone Features

3.To call a number or contact, do one of the following:

Tap the desired phone number or contact from the list.

To call a different phone number associated with the contact, touch the contact card icon at the right side of the contact name. On the contact details screen, tap the number you want to call.

Tips • During a call, use the VOLUME UP/DOWN button on the side of the phone to adjust the phone volume.

To send a text message to a selected contact, touch , and then tap theicon to the right of the contact’s mobile phone number. For more information about sending text messages, see “Text Messages” in Chapter 6.

Making a call from a text message

While you are viewing a text message on the Home screen Messages tab or in the Inbox, you can directly call the sender of the message.

1.While viewing the text message, press the TALK/SEND button.

2.The Phone screen then opens, with the sender’s phone number automatically filled in and ready to be dialed. To place the call, tap Talk on the Phone screen or press TALK/SEND again.

Tapping a phone number that is displayed in the body of the text message also allows you to call that number.

For more information about viewing text messages on the Home screen Messages tab, see “Messaging” in Chapter 3. For more information about working with text messages, see “Text Messages” in Chapter 6.

Making a call from an email message

While viewing a received email message, you can directly place a call to the sender of the message. Tapping a phone number that is displayed in the body of the email message also allows you to call that number.

Note To receive email, set up your email account first on your phone. See “Email” in Chapter 3 for instructions.

From the Home screen Email tab or Inbox

When you are browsing email messages on the Home screen Email tab or in the Inbox, you can select a received email and then directly call the sender by pressing the TALK/SEND button. To call the sender, follow the same steps in “Making a call from a text message”.

For more information about browsing through email on the Home screen Email tab, see “Email” in Chapter 3. For more information about working with email messages, see Chapters 6 and 7.

From an open email

When you open a received email, you can directly place a call to the sender.

1.On the Home screen, slide to the Email tab.

2.Swipe your finger up or down the screen to browse through received messages. Tap an email message to open it.

3.To place a call, you can do the following:

If the sender is a contact that is stored with a

phone number on your phone, tap Talk () that is displayed to the right of the sender name to directly dial the sender’s phone number.

To call a phone number that is contained in the email

message, tap that phone number.

 

Talk

 

 

 

button

Using Phone Features  31

4.If you made a call to the sender or the phone number contained in the email message, you can directly view the email message on the Phone screen while the call is in progress.

When the call is made from an email message, an email indicator is shown on the Keypad button. Tap this button to view the message directly on the Phone screen.

Making a call from a meeting request or reminder

When you receive a calendar reminder or meeting request email that contains a phone number, you can tap the number to directly place the call.

For example, if you are traveling and need to join a conference bridge call back in the home office, rest assured that you can join the call without delay. Appointment reminders you receive on your phone will conveniently display the phone number and PIN, ready for you to dial.

If you made a call from a meeting request email, you can view the meeting details in the email directly on the Phone screen while the call is in progress. An email indicator is shown on the Keypad button (). Tap this button to view the meeting details.

Making an emergency call

Enter the international emergency number for your locale, and press the TALK/SEND button on your phone.

Making an international call

1.Tap and hold the number 0 key on the Phone screen until the plus (+) sign appears. The plus (+) sign replaces the international prefix of the country that you are calling.

2.Enter the full phone number you want to dial, and press the TALK/SEND button on your phone. The full phone number includes the country code, area code (without the leading zero, if any), and phone number.

Assisted Dialing

Assisted Dialing allows you to easily dial international calls while roaming in another country. When enabled, Assisted Dialing On appears in the Phone screen.

To turn Assisted Dialing on

1.On the Phone screen, tap Menu > Assisted Dialing Settingsand select the Enable Assisted Dialingcheck box.

2.Under Reference Country, select the country that you want to call.

32  Using Phone Features

To edit a country’s international call settings

1.On the Phone screen, tap Menu > Assisted Dialing Settings.

2.Under Reference Country, select the country whose settings you want to edit.

3.Tap Menu > Edit.

4.Scroll down to edit the Country Code, IDD Prefix (International Direct Dial), NDD Prefix (National Direct Dial), Area/City Code and National Number Length (length of phone number).

5.Tap Save.

To reset the Reference Country to the default

1.On the Phone screen, tap Menu > Assisted Dialing Settings.

2.Tap Menu > Set Default.

Calling voice mail

Number 1 is generally reserved for your voice mail. Tap and hold this button on the Phone screen keypad to call voice mail and retrieve your voice mail messages.

2.3  Answering and Ending Calls

When you receive a phone call, the Incoming Voice Call screen will appear, allowing you to either answer or ignore the call.

Accepting or rejecting an incoming voice call

To answer a call

Do either of the following:

Fully slide the center button to the left of the Answer/Ignore bar.

Press the TALK/SEND button.

To reject a call

Do either of the following:

Fully slide the center button to the right of the Answer/Ignore bar.

Press the END/POWER button.

Center

 

 

button

To mute the ringing sound

To mute the ring without rejecting the call, tap Mute Ring or press the VOLUME DOWN button. You can also put the phone face down on a flat surface to mute the ringing sound.

To reject a call and send a text message

You can automatically send a default text message to the caller and reject the incoming voice call. Tap Send Text when you have an incoming call to send the text message. You can change the default text message by tappingMenu > Options > Advanced tab while on the Phone screen.

Using Phone Features  33

To accept a phone call when the phone is locked with a password

You can receive an incoming call when the phone is locked. When a simple PIN password is enabled, the following screen is shown when you accept the call:

Tap the onscreen buttons to turn the speakerphone on, hold the call, change the in-callvolume, and so on.

Note See “Protecting your phone with a password” in Chapter 13 for information on setting a simple PIN password.

Using the call functions

When a call is in progress, use the call function buttons to put a call on hold, dial another contact for a three-wayphone conference, enter notes about the conversation, and more.

To accept new calls

Your phone notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to start a three-waycall for all participants. See “Makingthree-waycalls in CDMA mode” for details.

Call functions

Contact details.

See “The Contact Details screen” in Chapter 3.

To use the speakerphone

During a call, do one of the following to turn the speakerphone on or off:

Tap to turn the speakerphone on. Tap this button again to turn the speakerphone off.

Press and hold the TALK/SEND button during a call to turn the speakerphone on or off.

Tap Menu > Turn Speakerphone Onor Off.

Note The speakerphone icon () appears in the title bar when the speakerphone is on.

Warning! To avoid damage to your hearing, do not hold the phone against your ear when the speakerphone is on.

34  Using Phone Features

To mute the microphone during a call

Tap to turn the microphone on or off.

To open Notes while in a call

Tap , or pull out the stylus.

To view or create appointments during a call

Tap to open the Calendar and browse your appointments or create a new one. Close the Calendar screen to return to the Phone screen.

To end a call

When a call is in progress, tap End Call or press END/POWER.

2.4  Using Call History

The missed call icon icon appears in the title bar when you missed a call. Use the Call History tab to check who the caller was, or view all your dialed numbers and received calls. To open the Call History tab, tapCall History orMissed Call on the Home tab.

Received call

Missed call

Dialed number

Return to the Home tab.

Open the Call History tab of the Contact Details screen and view all calls you exchanged with the contact.

Filter or clear the Call History tab.

If you have a long list of calls in the Call History tab, tap Menu > Filter, and then select the type of call you want to display.

Using Phone Features  35

2.5  Speed Dial

Use Speed Dial to callfrequently-usednumbers with a single tap. For example, if you assign a contact to the location 2 in Speed Dial, you can tap and hold the number 2 key on the Phone screen keypad to dial the contact’s number.

To create a Speed Dial entry

1.On the Phone screen, tap Menu > Speed Dial.

2.Tap Menu > New.

3.Tap a contact, and then select the phone number of the contact that you want to the speed dial key.

4.In Location, select an available key to use as the speed dial key, then tapOK.

Tip

To delete a Speed Dial entry, in the Speed Dial list, tap and hold the desired entry, and then tapDelete.

Notes

Number “0” and “1” keys are reserved and cannot be assigned as speed dial keys. The number “1” key is reserved

 

 

for voicemail. You can set any number between “2” and “99” as a speed dial key.

 

If you assign a speed dial key that is already occupied, the new entry will replace the existing entry

To make a call using Speed Dial

If you have assigned a speed dial key to a contact, do the following to dial the contact’s number:

Tap and hold the assigned key, if it is a single-digitspeed dial number.

To dial a two-digitspeed dial number, tap the first number key first, and then tap and hold the second number key.

2.6  Making Three-wayCalls in CDMA Mode

To set up a three-waycall, directly dial the participants and add each connected call to thethree-waycall.

Starting a three-waycall

1.Press the TALK/SEND button to open the Phone screen.

2.Make the call to the first participant. See “Making a call from the Phone screen” for instructions.

3.When the first call is connected, make a call to the second participant. The first call is put on hold when you dial the second call.

4.When the second call is connected, tap Flash to start thethree-waycall. The screen displaysCall in progress.

Caller 1

Caller 2

Tap Flashto start the three-way call.

36  Using Phone Features

When a three-waycall is in progress, you can tapFlash to cycle between thethree-waycall, Caller 1 only, and Caller 2 only.

Ending the three-waycall

Tap End Call or press END/POWER.

2.7  CDMA Phone Settings

Setting the phone connection to CDMA-onlymode

When the phone is in CDMA-onlymode, it can only access the Verizon network if available, or access other CDMA roaming networks when outside the Verizon network coverage area. You may want to set the phone toCDMA-onlymode when you want to access CDMA services or to prevent the phone from accessing GSM networks and accruing data charges.

To change to CDMA-onlymode

1.Tap Start > Settings > All Settings.

2.Tap Personal> Phone > Networktab.

3.Under Mode of operation selectCDMA only from thedrop-downmenu.

CDMA Services

Your phone can directly link to the Verizon CDMA network, and enable you to access and change the settings of various phone services for your phone when it is in CDMA mode. Contact Verizon to find out about the availability of phone services for your phone.

To access CDMA services and change their settings

1.On the Home screen, slide to the Settings tab and then tapAll Settings.

2.Tap Personal > Phone > CDMA Servicestab.

Note You must be in CDMA mode to access CDMA services.

3.Select the service you want to use, then tap Get Settings.

4.Choose your desired options, then tap OK.

The following are some of the optional phone services that you may find on your phone. For more information about customizing settings of phone services, see Help on your phone.

Phone Services

Usage

Location Setting

Allow the mobile phone network to detect your current location via your phone’s built-inGPS

 

chip. This is especially useful in times of emergency.

 

 

NBPCD Current Country

Set the calling parameters for the current country (such as country code, IDD prefix, and so

 

on).

 

 

TTY Mode

Allow the use of a TTY (teletypewriter) device with the phone for users who are visually or

 

hearing impaired.

 

 

Voice Privacy

Encrypts outgoing voice calls and uses secure channels when available.

 

 

Network Service

Choose whether to restrict your phone to phone calls from your home network only.

 

 

Time Synchronization

Choose whether or not to synchronize the time on your phone with the mobile network.

 

 

Emergency Call Alert

Enable the phone to alert you when an emergency call connects.

 

 

Using Phone Features  37

2.8  Using the HTC Imagio™ as a GSM Phone

Your wireless phone is set to Global mode by default enabling you to roam internationally on GSM networks. You can manually change the phone to GSM/UMTS only orCDMA only mode. See “GSM settings” and “CDMA Phone Settings” in this chapter for details.

GSM international roaming

Your HTC Imagio™ can operate in a number of countries on both CDMA (Code Division Multiple Access) and GSM (Global Systems for Mobile) networks. Use your phone in GSM/UMTS only or Global mode while in countries serviced by GSM networks. You may want to use GSM/UMTS only mode when you want to prevent the phone from using CDMA roaming networks and to access GSM/UMTS services. See “GSM Settings” for more information on GSM/UMTS services. If you want to enable the phone to select the network that is most accessible for your locale, select Global.

Using the Verizon GSM SIM card

Your wireless phone comes with a SIM card preinstalled which along with a Global Feature on your account, enables you to make calls and access email in GSM Networks while traveling overseas. Should your SIM card be lost or damaged, please follow these instructions for the installation of your new SIM.

To remove the SIM card

1.

Remove the back cover and the battery if it is

 

 

installed. See Chapter 1 for details.

SIM card slot

2.

Locate the SIM card slot.

 

3.

Press the tab in front of the SIM card slot

 

 

opening with one finger.

 

Tab

4.Slide the SIM card out from the slot with another finger.

To install the SIM card

1.Remove the back cover and the battery if it is installed. See Chapter 1 for details.

2.Locate the SIM card slot, then insert the SIM card with its gold contacts facing down and its cut-offcorner facing out the card slot.

3.Slide the SIM card completely into the slot.

Tip Any contacts on the SIM card are automatically added to Contacts.

Cut-off

corner

38  Using Phone Features

Adding contacts

Your phone lets you create phone contacts or SIM contacts if you have a SIM card installed. You can add SIM contacts via the Contacts screen, or by using SIM Manager. The following explains how to add contacts in the Contacts screen. See “Using SIM Manager” for information on adding SIM contacts in SIM Manager.

To add a contact to your SIM card

1.Tap Start > All Applications > Contacts.

2.On the Contacts screen, tap New, then selectSIM Contact.

3.Enter a contact name and phone number, and then tap OK.

Note See Chapters 3 and 12 for more information on adding contacts to your phone.

Using SIM Manager

SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your phone or vice versa, and make a call to a SIM contact.

To create a contact on your SIM card

1.Tap Start > All Applications > SIM Manager.

2.Tap New and enter the contact name and phone number.

3.Tap Save.

Tip To change contact information on your SIM card, tap a SIM contact, edit the information, and then tapSave.

To copy SIM contacts to your phone

If you have saved contacts on your SIM card, you can copy them into Contacts on your phone.

1.On the SIM Manager screen, select the desired contact, or select all SIM contacts by tapping Menu > Select All.

2.Tap Menu > Save to Contacts.

To copy contacts to the SIM card

Only one phone number per contact name can be stored on a SIM card.

1.On the SIM Manager screen, tap Menu > Contacts to SIM.

2.Select the check boxes of the contact’s phone numbers that you want to copy to your SIM card, then tap

Save.

When you copy a contact that has several phone numbers to your SIM card, SIM Manager separately saves each number by appending an indicator at the end of each name. By default, /M, /W, and /H are appended to indicate mobile, work, and home phone numbers respectively. To edit the default indicators and to select which other types of numbers to save to the SIM card, tap Menu > Tools > Options.

Copying text messages to the SIM card

1.In the SMS / MMS Inbox, tap a message thread to open it.

2.Tap the up or down navigation key at the bottom of the on-screenkeyboard to select a message in the thread.

3.Tap Menu > Copy to SIM.

Notes • You cannot copy a sent message from the thread to the SIM card.

Copying text messages from your phone to the SIM card results in duplicate messages in the Inbox when your SIM card is in use.

Making and answering calls

Making and answering calls in GSM mode is basically the same as making and answering calls in CDMA mode. See “Answering and Ending Calls” in this chapter for details.

To make an emergency call

Enter the international emergency number for your locale, and press the TALK/SEND button on your phone.

Tip Additional emergency numbers may be included in your SIM card. Contact Verizon for details.

Using Phone Features  39

To swap between two calls

Your phone notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers.

1.Press the TALK/SEND button to accept the second call and put the first call on hold.

2.To switch between callers, tap Menu > Swap or tap the dim area that shows “On Hold”.

3.To end the second call and return to the first call, tap End Call or press END/POWER on your phone.

Note Make sure your SIM card is enabled withthree-waycalling service. Contact Verizon for details.

Tap the on hold call to switch between calls.

Making three-waycalls in GSM mode

To set up a three-waycall, directly dial the participants and add each connected call to thethree-waycall.

To start a three-waycall

1.Press the TALK/SEND button to open the Phone screen.

2.Make the call to the first participant. See “Making a call from the Phone screen” for instructions.

3.When the first call is connected, make a call to the second participant. The first call is put on hold when you dial the second call.

4.When the second call is connected, tap Flash, press TALK/SEND, or tapMenu > Conference to start thethree-waycall. The screen displaysConference.

Tap Flashto start the three-way call.

40  Using Phone Features

To manage three-waycalls

While a three-waycall is in progress, you can do any of the following:

Tap Flash to put thethree-waycall on hold and make another call.

Receive another call.

Tap Menu > Private, select one of the participants, and tapPrivate to split thethree-waycall into separate calls again. The second participant is put on hold.

To end the three-waycall

Tap End Call or press END/POWER.

GSM settings

To protect your SIM card with a PIN code

The preinstalled Verizon SIM card may be preset with a PIN. You will be required to enter the PIN when turning on the phone. When prompted, enter the preset PIN, then tap Enter. If you enter the wrong PIN three times, the SIM card is blocked. If this happens, you can unblock it with the PUK (PIN Unblocking Key) obtained from Verizon.

If you do not want to enter the PIN to turn on the phone, you can disable it.

1.Tap Start > Settings > All Settings.

2.Tap Personal > Phone > GSM/UMTS Servicestab.

Note You must be in GSM/UMTS only mode to access GSM/UMTS services.

3.On the GSM/UMTS Services tab, tap PIN/PIN2 and then tapGet Settings.

4.Clear the Require PIN when phone is usedcheck box.

Tips • To change the PIN, tapChange PIN on the Phone: PIN/PIN2 screen.

Emergency calls can be placed at any time, without requiring a PIN.

To set the phone connection to GSM-onlymode

You can set the phone connection to GSM-onlymode to prevent the phone from accessing CDMA networks.

1.Tap Start > Settings > All Settings.

2.Tap Personal > Phone > Networktab.

3.Under Mode of operation selectGSM/UMTS only from thedrop-downmenu.