Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 2309m
HP 2309v
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0Items Requiring Selective Treatment
1.1Items listed below are classified as requiring selective treatment.
1.2Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
|
|
|
|
|
|
|
Quantity |
|
|
Item Description |
|
|
Notes |
|
|
of items |
|
|
|
|
|
|
included |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
in product |
|
|
Printed Circuit Boards (PCB) or Printed Circuit |
|
|
With a surface greater than 10 sq cm |
|
|
1 |
|
|
Assemblies (PCA) |
|
|
|
|
|
|
|
|
Batteries |
All types including standard alkaline and lithium coin |
0 |
|
||||
|
|
|
|
or button style batteries |
|
|
|
|
|
Mercury-containing components |
|
|
For example, mercury in lamps, display backlights, |
|
|
4 |
|
|
|
|
|
scanner lamps, switches, batteries |
|
|
{Backlight |
|
|
|
|
|
|
|
|
Assembly (I |
|
|
|
|
|
|
|
|
type) |
|
|
Liquid Crystal Displays (LCD) with a surface greater |
|
Includes background illuminated displays with gas |
1 |
|
|||
|
than 100 sq cm |
|
discharge lamps |
|
|
|
||
|
Cathode Ray Tubes (CRT) |
|
|
|
|
|
0 |
|
|
Capacitors / condensers (Containing PCB/PCT) |
|
|
|
27 |
|
||
|
Electrolytic Capacitors / Condensers measuring |
|
|
|
|
|
1 |
|
|
greater than 2.5 cm in diameter or height |
|
|
|
|
|
(C854 |
|
|
|
|
|
|
|
|
location) |
|
|
External electrical cables and cords |
|
|
|
3 |
|
||
|
|
|
|
|
|
|
||
|
Gas Discharge Lamps |
|
|
|
|
|
4 |
|
|
Plastics containing Brominated Flame Retardants |
|
|
|
0 |
|
||
|
|
|
|
|
|
|||
|
Components and parts containing toner and ink, |
|
|
Include the cartridges, print heads, tubes, vent |
|
|
0 |
|
|
including liquids, semi-liquids (gel/paste) and toner |
|
|
chambers, and service stations. |
|
|
|
|
|
Components and waste containing asbestos |
|
|
|
0 |
|
||
|
|
|
|
|
||||
|
Components, parts and materials containing |
|
|
|
|
|
0 |
|
|
|
|
|
|
|
|
|
|
EL-MF877-00 |
Page 1 |
Template Revision A |
|
|
refractory ceramic fibers |
|
|
|
|
Components, parts and materials containing |
|
0 |
|
|
radioactive substances |
|
|
|
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
|
Tool Description |
|
|
Tool Size (if |
|
|
|
|
|
applicable) |
|
|
Description #1: Bushing Screwdriver |
|
|
(HEX5.5MM) |
|
|
Description #2: Crossing Screwdriver |
2# |
|
||
|
|
|
|
|
|
|
Description #3 |
|
|
|
|
|
Description #4 |
|
|
|
|
|
Description #5 |
|
|
|
|
|
|
|
|
|
|
3.0Product Disassembly Process
3.1List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.Lay the monitor on the desk, remove the VESA mounting cover with hand.
2.Unlock the 4 screws which they fix the VESA mounting by 2# screwdriver.
3.Unlock the 4 screws which they fix the stand by 2# screwdriver.
4.Remove the front bezel with hand from product
5.Remove the backcover with hand from Product.
6.Seprate the Keypad and backcover with hand
7.Unlock the 2 screws which they fix the chassis and panel, and then pull the LVDS out .
8.Unlock 2 screws for DVI port, D-SUB port, Power port, and 7 screws which they fix between chassis and PCA boards, power board and IF board. Pull the wires out.
9.Unlock the 2 screws which they fix between the bottom-side and the base, and then unlock the 12 screws which they fix between the base and base-cover.
10.Remove the arm-rear and then unlock the 4 screws which they fix between the arm-front and the rion.
11.To see the detail process are as attached files including assemble panel.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 |
Page 2 |
Template Revision A |
|
Disassembly Flowchart for HP 2309 Model
|
|
Issue Date: Dec. 31, 2008 |
|
|
Initiator: Candy Zheng |
Action |
Tool |
Photo |
Lay the Monitor on the desk. |
N/A |
Remove the VESA mounting cover with |
N/A |
|
hand. |
||
|
Unlock the 4 screws which they fix the |
#2 Crossing Screw Driver |
|
VESA mounting by #2 scewdriver. |
||
|
Unlock the 4 screws which they fix the |
#2 Crossing Screw Driver |
|
stand by 2# screwdriver. |
||
|
Remove the front bezel out with hand. |
N/A |
Remove the back cover out with hand. |
N/A |
Unlock the 6 screws which fix the |
#2 Crossing Screw Driver |
|
speaker grill ,and take the sub-bezel out. |
||
|
Take the keypad out. |
N/A |
Unlock the 2 screws which fix the
chassis and panel, and then pull the #2 Crossing Screw Driver LVDS out .
Unlock 2 screws for DVI port, D-SUB |
|
|
port, Power port, and 7 screws which |
#2 Crossing Screw Driver and |
|
they fix between chassis PCA boards, |
||
#1 Bushing Screw Driver |
||
power board and IF board. Pull the wires |
||
|
||
out. |
|
Unlock the 2 screws which they fix between the bottom-side and the base,
and then unlock the 12 screws which #2 Crossing Screw Driver they fix between the base and base-
cover.
Remove the arm-rear and then unlock
the 4 screws which they fix between the #2 Crossing Screw Driver arm-front and the rion.
The panel |
N/A |
Loading...