Instructions for Date-keeper photo calendar
The following instructions are for HP color inkjet printers, which load from the front. If your printer loads from the back, please consult your printer's user guide. Try printing a test page before using any specialty paper.
8.5 x 11-inch Wall calendar printing instructions
Materials
•13 sheets of heavy 8.5 x 11-inch double-sided paper
•Ribbon, raffia, yarn, stapler, or brads
•Hole punch
Important note: Each month is made with two pages: one for your image (artwork page) and one for the month with dates (calendar page). You will need to save each month as an individual PDF file. There are also optional cover and back pages to be saved as an individual PDF file.
If you want to print a two-sided wall calendar (recommended), you will need to print the cover first with the month of January’s artwork page on the back side. The January calendar page is printed on the front side of the next sheet of paper, and the February artwork page is printed on the back of that page, and so on through the rest of the months. Each page needs to be printed from two files. See Table 1 below for printing sequence.
You can also print the calendar so that both the artwork and the calendar for an individual month are on a single sheet of paper – see alternative instructions below.
Instructions for 2 pages per month wall calendar:
Although a bit tricky to print and assemble, this version of the wall calendar will provide optimal readability for the individual dates.
1.Set your print preference to Best quality.
2.Place a sheet of double-sided high quality inkjet paper in your printer tray.
3.Set Page scaling to “None” in your Paper handling options.
4.Print first page according to chart below.
5.Remove the printed page from your printer tray and, without turning it over, return it to the loading tray.
6.Print the back side of the page and allow it to dry completely.
7.After printing all of your calendar and cover pages, gather them together in
the order outlined below, one on top of the other. Double-check the orientation of the pages and verify that, as you lift each page, the correct month artwork is with the correct calendar month: artwork on top, calendar month on bottom.
8.With the single sheets stacked together, punch three or more holes through the top of the calendar (you can buy decorative punches in a variety of fun shapes). Thread short lengths of ribbon, raffia, or yarn through the holes and tie them in loose bows. Or bind them with loose-leaf rings or brass fasteners.
9.When the calendar is bound together, punch a single hole through all the pages at the bottom of the cover (to hang the calendar on the wall).
Alternative instructions for single page per month wall calendar:
If you wish, you can print your calendar so that each month’s artwork and calendar page is on a single 8-1/2” x 11” page. The cover and back would not be used for this version. Here’s how to print:
1.Set your print preference to Best quality.
2.Place a sheet of double-sided high quality inkjet paper in your printer tray.
3.In your printer dialog box, change Page scaling to “Multiple pages per sheet” (usually in the Page handling area of the dialog box) AND go to “Properties” area to select “Landscape” printing (typically on the “Features” tab).
4.After printing all of your calendar and cover pages, gather them together in order.
5.With the single sheets stacked together, punch three or more holes through the top of the calendar (you can buy decorative punches in a variety of fun shapes). Thread short lengths of ribbon, raffia, or yarn through the holes and tie them in loose bows. Or bind them with loose-leaf rings or brass fasteners.
6.When the calendar is bound together, punch a single hole through all the pages at the top of the first month (to hang the calendar on the wall).
5 x 7-inch Datebook calendar printing instructions
Materials
∙26 pages of 5 x 7-inch photo paper (or 13 sheets of heavy 8.5 x 11-inch double-sided paper)
∙Hole punch
∙Ribbon, raffia, or yarn
∙X-ACTO knife, ruler, and cutting mat (optional)
∙Loose-leaf rings or brass fasteners (optional)
∙Glue or double-sided tape (optional)
Loading...