Hotpoint E6011, E6014 User Manual

0 (0)

Instructions for Installation and Use

Electric Hobs

Models E6011-E6014

To the Installer

Before installation fill in the product details on the back cover of this book. The information can be found on the rating plate.

To the User

You must read the instructions prior to installing and using the appliance and then retain them for future reference.

CONTENTS

Introduction

3

Advice and recommendations

4

Installation and fastening

5

Electrical connection

6

Description of the cooktop and cooking zone

7

The different function of the hob

8

Maintenance and care

9

After Sales Service

10

Hotpoint Guarantee

11

Key Contacts

Back Cover

Retention of this Instruction Book

This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance.

If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so the new owner can become familiar with the appliance and safety warnings.

If the Book is lost or damaged a copy may be obtained from:

Merloni Elettrodomestici LTD, Morley Way, Peterborough, PE2 9JB

2

Hotpoint E6011, E6014 User Manual

Introduction

Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been installed in accordance with the installation instructions detailed in this booklet.

To help make best use of your cooking equipment, please read this booklet carefully.

The hob is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.

* The guarantee is subject to the provisions that the appliance:

(a)Has been used solely in accordance with this booklet.

(b)Has been properly connected to a suitable supply voltage as stated on the rating plate, attached to the appliance.

(c)Has not been subjected to misuse or accident or been modified or repaired by any person other than the manufacturers authorised employee or agent.

(d)Has been correctly installed.

This appliance conforms with the following European Economic Community directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;

-89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications;

-90/396/EEC of 29/06/90 (Gas) and subsequent modifications;

-93/68/EEC of 22/07/93 and subsequent modifications.

3

Advice and recommendations

This appliance was designed for non-professional, household use.

Before using the appliance, read the instructions in the owner’s manual carefully since it contains all the instructions you require to ensure safe installation, use and maintenance. Keep this owner’s manual in a safe place for future reference.

When you have removed the packing, check whether the appliance is intact. If you have any doubts, contact a qualified professional before using the appliance.

Never leave the packing components (plastic bags, polystyrene foam, nails, etc.) within the reach of children since these are a source of potential danger.

Certain fundamental rules must be followed when using electrical appliances. The following are of particular importance:

do not touch the appliance with wet or damp hands,

never use the appliance when barefoot,

never use extensions,

never pull on the power supply cable or the appliance itself to unplug it from the mains socket,

never leave the appliance exposed to atmospheric agents (rain, sun, etc.),

do not allow children or persons who are not familiar with the appliance to use it without supervision.

Always unplug the appliance from the mains or switch

The appliance must be installed by a qualified technioff the main switch before cleaning or performing any

cian in compliance with the instructions provided by the

cleaning or maintenance operations.

manufacturer.

• If the surface of the glass cracks, unplug the ap-

The latter denies all responsibility for improper instal- pliance immediately. For any repairs, contact only an au-

lation which may harm persons and animals and damage property.

The electrical safety of this appliance can only be guaranteed if the latter is correctly and efficiently earthed, in compliance with regulations on electrical safety. Always ensure that this vital safety measure has been taken. If you have any doubts, call in a qualified technician to check the electrical system thoroughly.

The manufacturer denies all responsibility for damage resulting from a system which has not been earthed correctly.

thorised after-sales service centre and demand original spare parts. Failure to comply with the above may compromise the safety of the appliance.

Cut the power supply cable after disconnecting it from the power mains when you decide not to use the appliance any longer. Also make all potentially dangerous parts of the appliance safe, above all for children who could play with the appliance.

The glass ceramic hob is resistant to thermal and mechanical shocks. However, it may break due to a shock caused by a sharp object, such as a tool for example.

Before powering the appliance, check whether the tech- In this case, unplug the appliance immediately and

nical characteristics featured on the appliance data plate correspond with those of the mains electrical system.

Check that the current load of the mains supply and of the power sockets is suitable for the maximum power of the appliance, indicated on the appliance data plate. If in doubt, contact a qualified professional.

This appliance must only be used for the purpose for which it was expressly designed. Any other use (such as heating a room for example) is considered to be improper and consequently dangerous.

The manufacturer denies all responsibility for damage resulting from improper or incorrect use of the appliance.

contact an authorised after-sales service centre to have it repaired.

Remember that the heating area stays hot for at least half an hour after being turned off; please refrain from placing any cookware or other items on the cooking zone while still hot.

Do not turn on the heating zones if aluminium foil or plastic items have been placed on the hob surface.

Do not go near the heating zones when these are still

hot.

If you use small electric appliances near the hob, make sure their power supply cable does not come into contact with the hot parts of the hob.

Make sure all pan handles are always pointing inwards towards the centre of the hob to prevent any accidental spills.

First use: the glue used on the hob seals may leave greasy traces on the glass surface. We recommend you wipe these off before using the appliance, with the aid of a non abrasive cleaner. During the first few hours of use, you may detect a smell of rubber, which will disappear quickly.

4

Loading...
+ 8 hidden pages