Horizon Fitness T62, T61, T63, T64 User Manual

0 (0)

HZ SERIES

FOR MODELS :

T61

T62

T63

T64

TREADMILL USER’S GUIDE

INTRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this Horizon Series treadmill!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Series treadmill can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-motor warranty packages in the industry.

ou want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

The Horizon Series delivers.

TABLE OF CONTENTS

Important Precautions

3

Assembly

5

Before You Begin

9

readmill Operation

12

Conditioning Guidelines

19

roubleshooting & Maintenance

26

Limited Warranty

29

CONTACT INFORMATION

Back Panel

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

2

LIMITED WARRANTY

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

IMPORTANT PRECAUTIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using this treadmill. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

WARNING

Connect this exercise product to a properly grounded outlet only. See grounding

instructions.

BEFORE BEGIN YOU

LIMITED TROUBLESHOOTING CONDITIONING TREADMILL WARRANTY MAINTENANCE & GUIDELINES OPERATION

3

GROUNDING INSTRUCTIONS

his product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of

WARNING electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided

with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

his product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter such as the one illustrated below may be used to connect this plug to a 2-pole receptacle as shown, if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal

crew

3-Pole Grounded Outlet

2-Pole Outlet in Grounded Box

 

ADAPTER

 

GROUNDED

GROUNDED

TREADMILL

POWER CORD

TREADMILL

 

POWER CORD

 

 

METAL GROUNDING SCREW

WARNING o reduce the risk of burns, fire, electrical shock or injury to persons:

Never use the treadmill before securing the safety tether clip to your clothing.

If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

Do not wear clothes that might catch on any part of the treadmill.

Always wear athletic shoes while using this equipment.

Do not jump on the treadmill.

Keep power cord away from heated surfaces.

Do not insert or drop any object into any opening.

Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

At no time should more than one person be on treadmill while in operation.

The treadmills should not be used by persons weighing more than 275 pounds (T61), 300 pounds (T62), 325 pounds (T63) and 350 pounds (T64). Failure to comply will void the warranty.

The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

Do not use treadmill in garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

Use the treadmill only as described in this manual.

OTHER SAFETY TIPS FOR YOUR TREADMILL

OPERATION

WARNING o reduce the risk of damaging important components on your treadmill, it is strongly recommended that your treadmill is plugged into a dedicated 20 amp outlet, without the use of an additional extension cord and/or power strip.

IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

4

LIMITED WARRANTY

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TROUBLESHOOTING CONDITIONING TREADMILL MAINTENANCE & GUIDELINES OPERATION

ASSEMBLY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of a the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. NOTE: The console assembly is located under the treadmill deck and should ONLY be removed after STEP 1 of the assembly instructions have been fully completed! FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY! Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located to the left of the on/off power switch and power cord and enter it in the space provided below.

ENTER YOUR SERIAL NUMBER AND

MODEL NAME IN THE BOXES BELOW:

SERIAL NUMBER:

MODEL NAME:

LIMITED WARRANTY

5

Refer to the SERIAL NUMBER and MODEL NAME when calling for service. Also enter this serial number on your Warranty Card.

Horizon Fitness T62, T61, T63, T64 User Manual

READING RACK

 

CONSOLE

WATER BOTTLE HOLDER

TOUCH PAD PANEL WITH BLUE BACK-LIT DISPLAY

 

GRIP PULSE HANDRAILS

 

(T61 & T62 ONLY)

FAN

TOGGLE SWITCHES &

SAFETY KEY PLACEMENT

GRIP PULSE HANDRAILS

 

(T63 & T64 ONLY)

CONSOLE MAST

 

ON/OFF SWITCH

MOTOR COVER

 

CIRCUIT BREAKER

FOOT LOCK LATCH

 

POWER CORD

RUNNING BELT / RUNNING DECK

FOOT PLATE

SIDE RAIL

TRANSPORT WHEEL

ROLLER END CAP

 

AIR/GEL CELL CUSHION

REAR ROLLER

 

ADJUSTMENT CAPS

TOOLS INCLUDED

PARTS INCLUDED

5 mm Allen Wrench/Phillips Screw Driver

1 Safety Key

8 mm Allen Wrench or 6 mm Allen Wrench

1

Console Assembly (located under treadmill deck)

 

1

Power Cord

 

1

Hardware Pack

 

2

Support Bars

HARDWARE PACK CONTENTS (parts shown at actual size)

Teflon Washer (B)

Lock Washer (D)

Qty: 4

 

Qty: 2

top view

 

 

 

 

Arc Washer (E)

45 mm Bolt (A)

8 mm Bolt (C)

Qty: 2

 

Qty: 2

Qty: 4

 

top view

angle view

 

NOTE : If you have questions or if there are any missing parts, we will guarantee complete satisfaction. Customer Tech Support contact information is located on the back panel of this manual

6

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

LIMITED TROUBLESHOOTING CONDITIONING TREADMILL WARRANTY & MAINTENANCE GUIDELINES OPERATION

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

LIMITED TROUBLESHOOTING CONDITIONING TREADMILL WARRANTY MAINTENANCE & GUIDELINES OPERATION

7

PRE-ASSEMBLY

DO NOT CUT STRAPS UNTIL STEP 1.4!* Disassemble box and remove the

WARNING cardboard packaging that is not beneath the treadmill. Do not attempt to lift the

readmill at this time. Reach under treadmill running deck to locate parts box.

Remove plastic wrap from console masts.

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your treadmill, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

ASSEMBLY STEP 1

NOTE: If the straps have been removed before completing STEP 1, refer to the ROUBLESHOOTING section (page 26) in order to restore the treadmill to its proper position.

ASSEMBLY STEP 2

ALift LEFT CONSOLE MASTinto upright position. Be sure to hold the console mast firmly, as it will not stay in the upright position on it’s own.

BMove LEFT SIDE LINKAGE ARM into position. Insert EFLON WASHER (B) (2 pcs) and BOLT

(A) and tighten.

C Repeat on the right side.

DNow cut the banding straps and remove remaining packaging material.*

ALift the RUNNING DECKuntil lock latch is fully engaged.

BRemove CONSOLE from box and place out of the way.

CLower the treadmill RUNNING DECKfrom the folded position by stepping on LOCK LATCH on lower right side.

ASSEMBLY STEP 3

Be sure to tighten bolts after all are lined up.

A With running deck in lowered position, place CONSOLE

on upright masts. Slide the brackets that are underneath the console into the top holes of the upright masts.

BPlace LOCK WASHER (E) and

BOLT (D) into flat side of LEFT upright MASTand tighten.

CPlace ARC WASHER (F) and

BOLT (D) into curved side of

LEFTupright MASTand tighten.

ASSEMBLY STEP 4

A Gently lift RIGHTside of the console to connect the CONSOLE CABLE. Carefully tuck wires in mast to avoid damage. NOTE: Do not pinch console cable or grip pulse wires.

B Repeat steps 2-3 above to assemble the right side upright mast and console.

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

8

LIMITED WARRANTY

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TROUBLESHOOTING CONDITIONING TREADMILL MAINTENANCE & GUIDELINES OPERATION

ASSEMBLY STEP 5

YOU’RE FINISHED!

ASlide PLASTIC COVER CAPS over SUPPORT BARS

B Slide SUPPORT BARS ver top and side MOUNTING BRACKETS

CInsert 2 BOLTS (?) into the tops and 2 BOLTS (?) into the bottoms of each SUPPORT BAR

DConnect power plug to the treadmill and connect the cord to a power outlet. The on/off switch is located next to the power cord. Flip this switch to the 'on' position, so that the switch is lit. You will hear a beep and the console will light up.

LIMITED WARRANTY

9

Loading...
+ 22 hidden pages