Horizon Fitness EX-78 User Manual

Size:
7.6 Mb
Download

EX-58

EX-68

EX-78

CE5.1

GS1050E

 

ELLIPTICAL OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE DE L’EXERCISEUR ELLIPTIQUE MANUAL DEL PROPIETARIO DE LA MÁQUINA ELÍPTICA

Read the ELLIPTICAL guide before using this owner’s manual.

Lire le GUIDE D’UTILISATION DE L’EXERCISEUR ELLIPTIQUE avant de se servir du présent MANUEL DU PROPRIÉTAIRE. Lea la GUÍA DEL USUARIO DE LA MÁQUINA ELÍPTICA antes de usar este MANUAL DEL PROPIETARIO.

3

ENGLISH

36

Français

70

Español

2

ASSEMBLY

WARNING

There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.

Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is next to the serial number.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:

SERIAL NUMBER:

MODEL NAME: Horizon

 

 

 

 

elliptical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

»Refer to the SERIAL NUMBER and MODEL NAME when calling for service.

»Be sure to enter both the SERIAL NUMBER and MODEL NAME on your warranty card.

3

EX-58

CE5.1

SPEAKERS

CONSOLE

UPPER HANDLEBAR

PULSE GRIPS

WATER BOTTLE HOLDER

TOP CAP

CRANK

PIVOTING FOOT PADS

GUIDE RAIL SET

REAR COVER

IPOD/MP3 PLAYER POCKET

TOUCH PAD PANEL AND DISPLAY WINDOWS

CONSOLE FAN

CONSOLE MAST

LOWER HANDLEBAR

POWER CORD SOCKET

STABILIZER TUBE

MAIN FRAME

LOWER LINK ARM

PEDAL ARM

4

SPEAKERS

CONSOLE

UPPER HANDLEBAR

PULSE GRIPS

WATER BOTTLE HOLDER

TOP CAP

PIVOTING FOOT PADS

CRANK

GUIDE RAIL SET

REAR COVER

IPOD/MP3 PLAYER POCKET

TOUCH PAD PANEL AND DISPLAY WINDOWS

CONSOLE FAN

CONSOLE MAST

LOWER HANDLEBAR

POWER CORD SOCKET

STABILIZER TUBE

MAIN FRAME

LOWER LINK ARM

PEDAL ARM

EX-68

GS1050E

5

SPEAKERS

IPOD/MP3 PLAYER POCKET

 

CONSOLE

EX-78

UPPER HANDLEBAR

 

PULSE GRIPS

TOUCH PAD PANEL AND DISPLAY WINDOWS

CONSOLE FAN

CONSOLE MAST

WATER BOTTLE HOLDER

TOP CAP

PEDAL ARM

CRANK

PIVOTING FOOT PADS

INCLINE COVER

REAR COVER

LOWER HANDLEBAR

ON/OFF SWITCH

POWER CORD SOCKET

STABILIZER TUBE

MAIN FRAME

LOWER LINK ARM

GUIDE RAIL SET

6

TOOLS INCLUDED:

FF Screwdriver

FF 8 mmL-Wrench

FF 6 mmL-Wrench

FF 5 mmL-Wrench

FF 13/15 mm Flat Wrench

PARTS INCLUDED:

FF 1 Main FrameFF 1 Stabilizer TubeFF 1 Guide Rail SetFF 2 Pedal Arms

FF 2 Lower Handlebars

FF 2 Upper Handlebars

FF 2 Lower Link Arms With FootpadsFF 1 Top Cap

FF 1 Top Cap Rear Cover

(EX-68,EX-78and GS1040E only)FF 1 Console Mast

FF 1 Console Mast BootFF 1 Console

FF 2 Handlebar CapsFF 1 Water Bottle Holder

FF 1 Rear Cover(EX-78only)FF 1 Audio Adapter CableFF 1 Power Cord

FF 7 Hardware Bags

PRE ASSEMBLY

 

 

 

 

UNPACKING

 

Unpack the product where you will be using it. Place the elliptical carton on a level flat

 

ALL

surface. It is recommended that you place a protective covering on your floor. Never

MODELS

open box when it is on its side.

 

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and

 

partially threaded in before completely tightening any ONE bolt.

 

NOTE: A light application of grease may aid in the installation of hardware. Any grease,

 

such as lithium bike grease is recommended.

 

NEED HELP?

 

 

 

 

If you have questions or if

 

 

 

there are any missing parts,

 

 

 

contact Customer Tech

 

 

 

Support. Contact information

 

 

 

is located on the back panel

 

 

 

of this manual.

 

 

 

 

 

 

 

7

ASSEMBLY STEP 1

 

EX-58shown

ALL

 

MODELS

STABILIZER TUBE

ARC WASHERS (C)

SPRING WASHERS (B)

BOLTS (A)

MAIN FRAME

EX-78shown

STABILIZER TUBE

ARC WASHERS (C)

SPRING WASHERS (B)

BOLTS (A)

MAIN FRAME

8

HARDWARE BAG 1 CONTENTS :

BOLT (A)

SPRING WASHER (B)

ARC WASHER (C)

30 mm

15 mm

17 mm

Qty: 4

Qty: 4

Qty: 4

AOpen hardware bag 1.

BAttach the stabilizer tube to the main frame using 4 bolts (a), 4 spring washers (b) and 4 arc washers (C).

CE5.1, EX-58,EX-68,GS1050EASSEMBLY STEP 2

CE5.1, EX-58shown

 

HARDWARE BAG 2 CONTENTS :

 

 

 

BOLT (D)

FLAT WASHER (E)

TOOTH WASHER (G)

 

 

55 mm

17 mm

15 mm

 

 

Qty: 4

Qty: 4

Qty: 4

 

* This step is for CE5.1, EX-58,EX-68,GS1050E

 

 

models only.

 

 

 

A

Open hardware bag 2.

 

BOLTS (D)

B

Align guide rail set with main frame as

FLAT WASHERS (E)

TOOTH WASHERS (G)

 

shown.

 

 

 

 

 

 

MAIN FRAME

C

Attach the guide rail set to the main frame

GUIDE RAIL SET

 

using 4 bolts (D), 4 flat washers (e) and 4

 

 

 

 

 

 

tooth washers (g).

 

CE5.1

EX-58 EX-68

GS1050E

9

EX-78ASSEMBLY STEP 2

 

 

 

EX-78ONLY

HARDWARE BAG 2 CONTENTS (For StepsA–B):

EX-78

BOLT (D)

FLAT WASHER (E)

TOOTH WASHER (G)

 

55 mm

17 mm

15 mm

 

Qty: 4

Qty: 4

Qty: 4

 

* This step is for EX-78models only.

 

 

* CE5.1, EX-58,EX-68,GS1050E models skip to STEP 3.

 

A Open hardware bag 2.

 

 

B Attach the guide rail set to the main frame

BOLTS (D)

using 4 bolts (D), 4 flat washers (e) and 4

FLAT WASHERS (E)

tooth washers (g).

 

TOOTH WASHERS (G)

 

 

 

GUIDE RAIL SET

 

 

 

MAIN FRAME

 

 

 

10