ELITE SERIES 2.1E 4.1E
Elliptical User’s Guide
Table of Contents
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ASSEMBLY (2.1E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 ASSEMBLY (4.1E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 ELLIPTICAL OPERATION & ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 CONSOLE FEATURES & DISPLAY (2.1E & 4.1E) . . . . . . . . . . . . . . . . . . . . . . . . .15 PROGRAM PROFILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 PROGRAM CHARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 USING YOUR RACE PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 USING YOUR THR ZONE PROGRAMS 1 & 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 USING YOUR CUSTOM USER PROGRAMS 1 & 2 . . . . . . . . . . . . . . . . . . . . . . . .27 TROUBLESHOOTING & MAINTENANCE PROCEDURES . . . . . . . . . . . . . . . . . . . .28 COMMON PRODUCT QUESTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 MONITORING YOUR HEART RATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 HEART RATE CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 DEVELOPING A FITNESS PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 WARM UP & COOL DOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 ACHIEVING YOUR FITNESS GOALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 WEEKLY LOG SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 MONTHLY LOG SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
!
CAUTION
CAUTION
Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.
2
Important Precautions
SAVE THESE INSTRUCTIONS
When using an electrical product, basic precautions should always be followed. Read all instructions before using this exercise product.
WARNING
WARNING!
To reduce the risk of burns, fire, electrical shock or injury to persons:
•Use this exercise product for its intended use as described in this user’s guide. Do not use attachments not recommended by the manufacturer.
•Never drop or insert any object into any opening.
•Do not remove the elliptical trainer's side covers. Service should be performed only by an authorized Horizon Fitness service provider.
•Never operate this elliptical trainer if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or immersed in water.
•Keep the cord away from heated surfaces.
•Do not use outdoors.
•Only use the power cord provided with your elliptical trainer.
•Never place the power cord under carpeting or place any object on top of the power cord, which may pinch or damage it.
•Unplug your elliptical trainer before moving it.
3
!
CAUTION
CAUTION!
•If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.
•Do not turn pedal arms by hand.
•Do not wear clothing that might catch on any part of the elliptical trainer.
•Make sure handlebars are secure before each use.
•Read the owner's guide before operating this elliptical trainer.
•Maintain a comfortable pace. Do not ‘sprint’ above 80 rpms on this machine.
•To maintain balance it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.
OPERATION
It is essential that your elliptical trainer is used only indoors, in a climate controlled room. If your elliptical trainer has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical trainer is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
CHILDREN
•Keep children off of your elliptical trainer at all times.
•When the elliptical is in use, young children and pets should be kept at least 10 feet away.
CLEANING
• Clean with soap and slightly damp cloth only. Never use solvents.
USER CAPACITY
• 2.1E=275 lbs, 4.1E=300 lbs
4
CAUTION:
BEFORE BEGINNING ANY EXERCISE PROGRAM, ALWAYS CONSULT YOUR PHYSICIAN. IF YOU EXPERIENCE CHEST PAINS, NAUSEA, DIZZINESS OR SHORTNESS OF BREATH, STOP EXERCISING AND CONSULT YOUR PHYSICIAN BEFORE CONTINUING.
IMPORTANT: PLEASE READ BEFORE USE!
!
CAUTION
CAUTION!
ASSEMBLY
There are several areas during the assembly process of a elliptical trainer that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical trainer could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical trainer, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your elliptical trainer’s serial number located under the left side cover for all models and enter it in the space provided below. Also locate the model name for all models which is located on the side cover. (see drawing below)
SERIAL NUMBER AND MODEL NAME LOCATION:
Note: Serial number lable is located on the front side of the console mast base.
ENTER YOUR SERIAL NUMBER IN BOX BELOW:
Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records. Be sure to read the Safety Instructions and complete user’s Guide before using your new elliptical trainer.
WARRANTY REGISTRATION
Your warranty card must be completed and sent to Horizon Fitness within thirty days of purchase or registered on line at www.horizonfitness.com, before a warranty claim can be processed. Please keep receipt with owner’s guide as it may be required for a warranty claim. Make sure to send in warranty registration card to validate your warranty.
5
Before You Begin
CONGRATULATIONS! on choosing a Elite Series elliptical trainer.
You’ve taken an important step in developing and sustaining an exercise program! Your elliptical trainer is a tremendously effective tool for achieving your personal fitness goals. Regular use of your elliptical trainer can improve the quality of your life in so many ways.
Here are just a few of the health benefits of aerobic exercise:
•Weight Loss
•A Healthier Heart
•Improved Muscle Tone
•Increased Daily Energy Levels
•Reduced Stress
•Help In Countering Anxiety and Depression
•An Improved Self Image
The key to reaping these benefits is to develop the exercise habit. Your new elliptical trainer will help you eliminate the obstacles that prevent you from getting in your exercise time. Inclement weather and darkness won't interfere with your workout when you use your elliptical trainer in the comfort of your home. This manual provides you with basic information for using and enjoying your new machine. A more complete knowledge of your new elliptical trainer will assist you in realizing your goal of a healthy lifestyle.
Console
Water Bottle Stoppers 
Console Mast
Handle Bar
Console Mast Boot
Grip Pulse
Pivoting Foot Pad
Tension Knob
Pedal Arm
Front Foot Tube
Guide Rail
Transport Wheel
Link Arm
Levelers
Console Mast
Console Mast Boot
Pivoting Foot Pad
Pedal Arm
Guide Rail
Levelers
Console
Handle Bar |
Grip Pulse |
Front Foot Tube
Transport Wheel
Link Arm
6
Assembly
2.1E ASSEMBLY UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. Note: It is recommended that you apply grease to the threads of each bolt as you assemble the product, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY! Place your elliptical trainer on a level flat surface. It is recommended that you place a protective covering on your floor.
PARTS
•1 Front Foot Tube
•2 Upper Handlebars
•2 Lower Handlebars
•2 Pedal Link Arms
•2 Pedal arms
•2 Guide Rails
•1 Console
•1 Console Mast
•1 Console Mast Boot
•1 Tension Knob
•2 AA Batteries
•2 Foot Pads
•2 Crank Boots
•2 Front Upper Handlebar Covers
•2 Back Upper Handlebar Covers
•1 Hardware Pack
TOOLS (included)
•4mm Allen Wrench
•5mm Allen Wrench/ Phillips Screw Driver
•13/15mm Flat Wrench
•17mm Wrench
If you have any questions, or if there are any missing parts, we will guarantee complete satisfaction.
PLEASE CALL OUR TOLL-FREE DIRECT CUSTOMER ASSISTANCE CENTER @ 1-800-244-4192 Mon.-Fri., 8 a.m.-5 p.m. CST (excluding holidays).
7
2.1E HARDWARE
C) 12mm Bolt
Quantity: 3
A) 20mm Bolt
Quantity: 2
G) 13mm Nut
Quantity: 3
K) 25mm Teflon
Coated Washer
Quantity: 4
B) 70mm Bolt
Quantity: 3
Q) 8mm Bolt
Quantity: 8
L) Wavy Washer
Quantity: 2
U) Lock Washer
Quantity: 3
P) 15/13mm Wrench
Quantity: 1
D) 15mm Bolt |
E) 8mm Set Screw |
|
|
Quantity: 4 |
F) 17mm Nut |
||
Quantity: 6 |
|||
|
|||
|
|
Qauntity: 2 |
|
I) 15mm Screw |
J) Arc Washer |
H) 20mm Screw |
Quantity: 4 |
Quantity: 3 |
|
|
|
Quantity: 2 |
|
|
R) White Teflon Washer |
S) Sleeve |
Quantity: 4 |
Quantity: 2 |
T) 40mm Bolt
Quantity: 2
O) 17mm Wrench |
M) 5mm Allen/ |
N) 4mm Allen |
Quantity: 1 |
Screw Driver |
|
|
Quantity: 1 |
Quantity: 1 |
8
1
A |
STEP 1:
ATTACH FRONT TUBE.
Note: Make sure not to tighten bolts until all assembly steps have been completely assembled and aligned.
4 |
F |
|
K |
|
H |
STEP 4:
ATTACH LEFT & RIGHT PEDAL ARMS AND PEDAL ARM COVERS.
Note: Black ‘Teflon’ surface of K should be facing the pedal arm.
7 |
R |
|
|
G |
|
|
T |
|
S |
STEP 7:
ATTACH LEFT & RIGHT LINK ARMS TO THE LEFT & RIGHT LOWER HANDLE BARS.
2 |
B |
STEP 2:
ATTACH LEFT & RIGHT GUIDE RAILS.
5 E |
I |
STEP 5:
ATTACH LEFT & RIGHT LOWER HANDLE BARS TO CONSOLE MAST AND ATTACH LEFT & RIGHT UPPER HANDLEBARS. ATTACH H-BAR COVERS. Note: Bolts and washers are pre-assem- bled.
8
STEP 8:
ATTACH TENSION KNOB
9
3 |
|
C |
|
U |
|
|
J |
|
G |
|
|
|
|
|
|
|
B |
STEP 3:
ATTACH CONSOLE MAST AND CONSOLE MAST BOOT.
Note: Make sure to loosen the water bottle screws in order to fit the console cable through the mast. DO NOT PINCH WIRES!
6 D |
L |
Q |
Q |
STEP 6:
ATTACH LEFT & RIGHT FOOT PADS TO FOOT PLATE/LINK ARM. ATTACH PIVOTING FOOT PLATE TO PEDAL ARM.
9 
STEP 9:
ATTACH CONSOLE AND CONNECT ALL WIRES.
Note: DO NOT PINCH WIRES! Note: Bolts are pre-assembled to console.
Assembly
4.1E ASSEMBLY UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. Note: It is recommended that you apply grease to the threads of each bolt as you assemble the product, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY! Place your elliptical trainer on a level flat surface. It is recommended that you place a protective covering on your floor.
PARTS
•1 Front Foot Tube
•2 Upper Handlebars
•2 Lower Handlebars
•2 Pedal Link Arms
•2 Foot Pads
•2 Pedal arms
•2 Guide Rails
•1 Console
•1 Console Mast
•1 Console Mast Boot
•1 Rear Rail Stabilizer
•1 Power Supply
•2 Crank Boots
•2 Front Upper Handlebar Covers
•2 Back Upper Handlebar Covers
•1 Hardware Pack
TOOLS (included)
•4mm Allen Wrench
•5mm Allen Wrench/ Phillips Screw Driver
•13/15mm Flat Wrench
•17mm Wrench
If you have any questions, or if there are any missing parts, we will guarantee complete satisfaction.
PLEASE CALL OUR TOLL-FREE DIRECT CUSTOMER ASSISTANCE CENTER @ 1-800-244-4192 Mon.-Fri., 8 a.m.-5 p.m. CST (excluding holidays).
10
4.1E HARDWARE
|
C) 12mm Bolt |
E) 8mm Set Screw |
|
|
Quantity: 3 |
|
|
|
Quantity: 4 |
F) 17mm Nut |
|
A) 20mm Bolt |
|
||
|
|
||
|
|
Qauntity: 6 |
|
Quantity: 2 |
|
|
|
|
|
|
|
D) 15mm Bolt |
I) 15mm Screw |
|
|
Quantity: 6 |
Quantity: 4 |
|
|
|
J) Arc Washer |
|
V) Arc Washer |
|
Quantity: 3 |
|
H) 20mm Screw |
|||
Quantity: 4 |
|||
Quantity: 2 |
|
||
|
|
||
B) 70mm Bolt |
K) 70mm Bolt |
|
|
Quantity: 1 |
Quantity: 4 |
|
|
|
G) 13mm Nut |
S) Sleeve |
|
|
Quantity: 3 |
||
|
|
Quantity: 2 |
|
L) Wavy Washer |
U) Lock Washer |
|
|
T) 40mm Bolt |
Quantity: 2 |
Q) 8mm Bolt |
R) White Teflon Washer |
||
|
Quantity: 3 |
Quantity: 2 |
||
|
|
Quantity: 8 |
Quantity: 4 |
|
P) 15/13mm Wrench
Quantity: 1
W) 25mm Teflon
Coated Washer
Quantity: 4
|
O) 17mm Wrench |
|
Quantity: 1 |
M) 5mm Allen/ |
N) 4mm Allen |
Screw Driver |
Quantity: 1 |
Quantity: 1 |
|
11
1
A |
STEP 1:
ATTACH FRONT TUBE.
Note: Make sure not to tighten bolts until all assembly steps have been completely assembled and aligned.
2 |
K |
|
|
||
V |
F |
|
K |
||
|
||
|
V |
|
|
F |
STEP 2:
ATTACH LEFT & RIGHT GUIDE RAILS AND REAR RAILSTABILIZER.
Note: Make sure all the levelers are leveled.
3 |
C |
U |
J |
|
|
G |
B |
|
STEP 3:
ATTACH CONSOLE MAST AND CONSOLE MAST BOOT.
Note: Make sure to loosen the water bottle screws in order to fit the console cable through the mast. DO NOT PINCH WIRES!
4 F |
W |
H |
STEP 4:
ATTACH LEFT & RIGHT PEDAL ARMS AND PEDAL ARM COVERS.
Note: Black ‘Teflon’ surface of W should be facing the pedal arm.
5 E |
I |
STEP 5:
ATTACH LEFT & RIGHT LOWER HANDLE BARS TO CONSOLE MAST AND ATTACH LEFT & RIGHT UPPER HANDLE BARS. ATTACH H-BAR COVERS.
Note: Bolts and washers are preassembled.
6 D |
L |
|
|
Q |
Q |
STEP 6:
ATTACH LEFT & RIGHT FOOT PADS TO FOOT PLATE/LINK ARM. ATTACH PIVOTING FOOT PLATE TO PEDAL ARM.
7 |
R |
|
|
|
|
G |
|
|
|
S |
T |
STEP 7:
ATTACH LEFT & RIGHT LINK ARMS TO LEFT & RIGHT LOWER HANDLE BARS.
12
8
STEP 8:
ATTACH CONSOLE AND CONNECT ALL WIRES.
Note: DO NOT PINCH WIRES! Note: Bolts are pre-assembled to console.
Elliptical Operation & Adjustments
POWER
The console on your (2.1E) is powered by 2 AA batteries, which are replaceable through the back side of the console. Your elliptical itself, is powered by you.
Your programmable (4.1E) elliptical trainer is powered by a power supply. The power supply must be plugged into the power jack, which is located in the front of the machine near the front foot tube.
LEVELING
The elliptical trainer should be level for optimum use. Once you have placed the elliptical trainer where you intend to use it, raise or lower the adjustable levelers located on the bottom of the rear base frame. Once you have leveled the elliptical trainer, lock the levelers in place by tightening the wing nuts against the frame.
FOOT POSITIONING
Your elliptical trainer offers a variety of foot positions. Moving your foot to the forward most position of the foot pad increases your step height, which will create a feel similar to a step machine. Placing your foot toward the back of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or run.
Your elliptical trainer also allows you to pedal both forward and backwards to offer a variation to your workout and to focus on other major leg muscle groups such as your hamstrings and calves.
13
Loading...