FOR MODEL :
E701
ELLIPTICAL USER’S GUIDE
|
|
|
E701_Rev.1.8.indd 1 |
9/10/08 11:04:53 AM |
|
|
||
|
|
|
INTRODUCTION
CONGRATULATIONS and THANK YOU for your purchase of this Horizon Fitness elliptical!
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Fitness elliptical can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-brake warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.
Horizon Fitness ellipticals deliver.
TABLE OF CONTENTS
Important Precautions |
4 |
|
|
Assembly |
5 |
|
|
Before You Begin |
14 |
|
|
Elliptical Operation |
15 |
|
|
Conditioning Guidelines |
21 |
|
|
Troubleshooting & Maintenance |
26 |
|
|
Limited Warranty |
30 |
CONTACT INFORMATION |
Back Panel |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY & MAINTENANCE GUIDELINES OPERATION
E701_Rev.1.8.indd 2-3 |
9/10/08 11:04:54 AM |
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY MAINTENANCE & GUIDELINES OPERATION
IMPORTANT PRECAUTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this elliptical. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this elliptical. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.
|
|
To reduce the risk of burns, fire, |
|
WARNING |
|
|
electrical shock or injury to persons: |
|
|
|
|
|
|
|
|
|
|
•If you experience any kind of pain, including, but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.
•Maintain a comfortable pace. Do not sprint above 80 rpms.
•To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.
•Do not wear clothes that might catch on any part of the elliptical.
•Do not turn pedal arms by hand.
•Make sure handlebars are secure before each use.
•Do not insert or drop any object into any opening.
•Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)
•This elliptical should not be used by persons weighing more than 275 pounds. Failure to comply will void the warranty.
•This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.
•Do not use elliptical in any location that is not temperature controlled, such as but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
•Use the elliptical only as described in this manual.
•Keep the topside of the foot support clean and dry.
•Care should be taken when mounting or dismounting the equipment. Before mounting or dismounting, move the pedal on the mounting or dismounting side to its lowest position and bring the machine to a complete stop. If the elliptical has an incline bring the elliptical to 0% incline before mounting or dismounting.
•Disconnect all power before servicing the equipment.
At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet. At NO time should children under the age of 12 use the elliptical. Children over the age of 12 should not use the elliptical without adult supervision.
It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
ASSEMBLY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
There are several areas during the assembly process of an elliptical that
WARNING special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If
the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.
Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is located on the mast boot.
Enter your serial number and model name in the boxes below:
SERIAL NUMBER :
MODEL NAME :
*Refer to the serial number and model name when calling for service.
*Also enter this serial number on your Warranty Card.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY & MAINTENANCE GUIDELINES OPERATION
E701_Rev.1.8.indd 4-5 |
9/10/08 11:04:56 AM |
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY MAINTENANCE & GUIDELINES OPERATION
CONSOLE |
UPPER HANDLEBAR |
PULSE GRIPS |
CONSOLE MAST |
LEFT HANDLEBAR |
HANDLEBAR COVER |
WATER BOTTLE HOLDER |
LOWER HANDLEBAR |
CONSOLE MAST BOOT |
POWER CORD SOCKET |
PEDAL ARM |
|
PIVOTING FOOT PAD |
STABILIZER WHEEL |
|
ELBOW COVER |
LOWER LINK ARM |
PEDAL ARM COVER |
TOOLS INCLUDED |
|
PARTS INCLUDED |
|
|
||
|
|
|
|
|
||
c 5mm Allen Wrench |
c 1 |
Console |
c 2 Elbow Cover Sets |
|||
c Phillips Screw Driver |
c 1 |
Console Mast |
c 2 Pedal Arm Covers |
|||
c 13/15mm Flat Wrench |
c 1 |
Console Mast Boot |
c 2 Pivoting Foot Pads |
|||
c 5mm T Wrench |
c 2 Stabilizer Wheels |
c 1 |
Water Bottle Holder |
|||
|
|
c 2 |
Upper Handlebars |
c 4 Hardware Bags |
||
|
|
c 2 |
Lower Handlebars |
c 1 |
Audio Adaptor Cable |
|
|
|
c 2 |
Handlebar Cover Sets |
c 1 |
Power Cord |
|
|
|
c 2 |
Lower Link Arms |
|
|
|
If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
ASS E M B LY STEP 1 |
|
|
FRONT STABILIZER TUBE |
|
STABILIZER WHEEL |
REAR LEVELERS |
SCREW (A) |
|
|
|
PEDAL ARM COVER |
|
MIDDLE LEVELERS |
|
SCREW (B) |
|
ADJUST HEIGHT |
|
LOCK ADJUSTMENT |
AOpen HARDWARE BAG FOR STEP 1.
BSlide the STABILIZER WHEEL into the FRONT STABILIZER TUBE and attach using 1 SCREW (A).
CRepeat on other side.
DAdjust the 2 rear levelers so the elliptical is level on the floor. Then adjust the 2 middle levelers so they are snug with the floor.
EAttach the PEDAL ARM COVER to the right PEDAL ARM using 1 SCREW (B).
FRepeat on the other side.
HARDWARE BAG FOR STEP 1 CONTENTS :
SCREW (A) |
SCREW (B) |
10 mm |
15 mm |
Qty: 2 |
Qty: 2 |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY & MAINTENANCE GUIDELINES OPERATION
E701_Rev.1.8.indd 6-7 |
9/10/08 11:05:01 AM |
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
TROUBLESHOOTING CONDITIONING ELLIPTICAL MAINTENANCE & GUIDELINES OPERATION
ASS E M B LY STEP 2 |
|
|
|
CONSOLE MAST |
|
BOLTS (C) |
|
CONSOLE |
|
MAST |
|
SPRING WASHERS (D) |
|
WATER |
|
BOTTLE |
|
|
|
|
FLAT WASHERS (E) |
|
HOLDER |
|
|
|
CONSOLE MAST BOOT |
|
PRE-ATTACHED |
|
BOLTS (C) |
|
|
SCREW |
|
|
|
|
MAIN FRAME |
|
|
AOpen HARDWARE BAG FOR STEP 2.
BSlide CONSOLE MAST BOOT onto the bottom of the CONSOLE MAST above bolt holes as shown.
CCarefully pull the CONSOLE CABLE through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
DAttach the CONSOLE MAST to the MAIN FRAME using 7 BOLTS (C), 7 SPRING WASHERS (D) and 7 FLAT WASHERS (E). Slide CONSOLE MAST BOOT down to cover main frame.
DO NOT PINCH WIRES!
E Attach the WATER BOTTLE HOLDER to the mast using 2 PRE-ATTACHED SCREWS.
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (C) |
SPRING WASHER (D) |
FLAT WASHER (E) |
15 mm |
15 mm |
20 mm |
Qty: 7 |
Qty: 7 |
Qty: 7 |
ASS E M B LY STEP 3 |
|
|
CONSOLE |
UPPER RIGHT |
|
MAST |
||
HANDLEBAR |
||
|
||
PRE-ATTACHED WASHER, |
PRE-ATTACHED SCREWS |
|
WAVY WASHER & BOLT |
||
LOWER RIGHT |
HANDLEBAR |
|
HANDLEBAR |
||
|
COVERS |
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
ARemove PRE-ATTACHED BOLT & WASHER from CONSOLE MAST.
BSlide lower RIGHT HANDLEBAR onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED WASHER
& BOLT.
CRemove PRE-ATTACHED SET SCREWS from right UPPER HANDLEBAR.
DSlide right UPPER HANDLEBAR onto right LOWER HANDLEBAR and secure by reinserting PRE-ATTACHED SET SCREWS.
|
|
After handlebars are assembled they will rotate freely – be cautious. Until |
|
WARNING |
|
|
the machine is fully assembled, do not grab the handlebars for support. |
|
|
|
|
|
|
|
ESnap the front and back HANDLEBAR COVERS together onto the HANDLEBARS. Note the position of the snap tabs on the covers before snapping into position.
FRepeat on other side.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
TROUBLESHOOTING CONDITIONING ELLIPTICAL & MAINTENANCE GUIDELINES OPERATION
LIMITED |
|
|
|
LIMITED |
WARRANTY |
|
|
|
WARRANTY |
|
|
|
||
E701_Rev.1.8.indd |
8-9 |
9/10/08 |
11:05:15 AM |
|
IMPORTANT INTRODUCTION PRECAUTIONS
ASSEMBLY
BEFORE BEGIN YOU
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY MAINTENANCE & GUIDELINES OPERATION
10
ASS E M B LY STEP 4 |
LEFT LOWER LINK ARM |
U-BRACKET |
SPLIT TEFLON WASHERS (G) |
LEFT PEDAL ARM |
BOLT (I) |
FLAT |
WASHER (H) |
CONNECTING TUBE |
SPACER (F) |
AOpen HARDWARE BAG FOR STEP 4.
BAlign the U-BRACKET on the LEFT LOWER LINK ARM with the CONNECTING TUBE on the LEFT PEDAL ARM.
CSlide the SPACER (F) through the U-BRACKET and the CONNECTING TUBE so that it can no longer rotate.
DInsert 2 SPLIT TEFLON WASHERS (G) between the CONNECTING TUBE and the U-BRACKET.
ESecure the joint with a FLAT WASHER (H) and BOLT (I).
FRepeat on the other side.
HARDWARE BAG FOR STEP 4 CONTENTS : |
|
|
|
|
SPACER (F) |
|
|
65 mm axis |
|
|
Qty: 2 |
SPLIT TEFLON |
FLAT WASHER (H) |
BOLT (I) |
WASHER (G) |
35 mm |
15 mm |
28 mm |
Qty: 2 |
Qty: 2 |
Qty: 4 |
|
|
ASS E M B LY STEP 5 |
|
|
|
|
LOWER LINK ARM |
LOWER HANDLEBAR |
|
|
SPACER RINGS |
|
|
|
SPACER |
|
|
|
LOWER HANDLEBAR |
|
|
|
SCREW (L) |
|
|
|
NUT (N) |
BOLT (M) |
|
LOWER LINK ARM |
TEFLON WASHER (K) SPACER (J) |
SCREW (L) |
|
AOpen HARDWARE BAG FOR STEP 5.
BSlide SPACER (J) into LOWER LINK ARM.
CPlace TEFLON WASHERS (K) on either side of SPACER (J). While holding TEFLON WASHERS (K) slide LOWER LINK ARM into bottom end of LOWER HANDLEBAR.
DInsert BOLT (M) into LOWER HANDLEBAR and secure using NUT (N).
EAttach the OUTSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (L).
FSnap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
GAttach the INSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (L).
HRepeat on other side.
HARDWARE BAG FOR STEP 5 CONTENTS : |
|
|
|
SPACER (J) |
|
TEFLON WASHER (K) |
SCREW (L) |
44 mm |
|
28.4 mm |
15 mm |
Qty: 2 |
|
Qty: 4 |
Qty: 4 |
|
BOLT (M) |
NUT (N) |
|
|
INSIDE DIAMETER: |
|
|
|
60 mm |
|
|
|
8 mm |
|
|
|
Qty: 2 |
|
|
|
Qty: 2 |
|
|
|
|
|
11
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY & MAINTENANCE GUIDELINES OPERATION
E701_Rev.1.8.indd 10-11 |
9/10/08 11:05:24 AM |
Loading...