Horizon Fitness CT61 User Manual

Size:
1.72 Mb
Download

CardioCORE

Treadmill

FOR MODEL :

CT61

TREADMILL USER’S GUIDE

INTRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this CardioCORE Treadmill!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a CardioCORE Treadmillcan help you attain it – addingclub-qualityperformance to yourat-homeworkouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongestframe-to-motorwarranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

The CardioCORE Treadmilldelivers.

TABLE OF CONTENTS

Important Precautions

3

 

 

Assembly

5

 

 

Before You Begin

11

 

 

Treadmill Operation

14

 

 

Conditioning Guidelines

21

 

 

Troubleshooting & Maintenance

27

 

 

Limited Warranty

30

CONTACT INFORMATION

Back Panel

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

2

LIMITED WARRANTY

IMPORTANT INTRODUCTIONPRECAUTIONS

ASSEMBLY

IMPORTANT PRECAUTIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using this treadmill. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

 

 

Connect this exercise product to a properly grounded outlet only. See grounding

 

WARNING

 

instructions.

 

 

 

 

 

 

BEFORE BEGIN YOU

LIMITED TROUBLESHOOTING CONDITIONING TREADMILL WARRANTY MAINTENANCE & GUIDELINES OPERATION

3

GROUNDING INSTRUCTIONS

This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-groundingconductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.

Improper connection of theequipment-groundingconductor can result in a risk of

WARNING electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided

with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-voltcircuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter such as the one illustrated below may be used to connect this plug to a2-polereceptacle as shown, if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

3-PoleGrounded Outlet

2-PoleOutlet in Grounded Box

 

ADAPTER

 

GROUNDED

GROUNDED

TREADMILL

POWER CORD

TREADMILL

 

POWER CORD

 

 

METAL GROUNDING SCREW

WARNING To reduce the risk of burns, fire, electrical shock or injury to persons:

Never use the treadmill before securing the safety tether clip to your clothing.

If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

Do not wear clothes that might catch on any part of the treadmill.

Always wear athletic shoes while using this equipment.

Do not jump on the treadmill.

Keep power cord away from heated surfaces.

Do not insert or drop any object into any opening.

Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

At no time should more than one person be on treadmill while in operation.

The treadmill should not be used by persons weighing more than 275 pounds. Failure to comply will void the warranty.

The treadmills are intended for in-homeuse only. Do not use this treadmill in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

Do not use treadmill in any location that is not temperature controlled, such as garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

Use the treadmill only as described in this manual.

At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet. At NO time should children under the age of 12 use the treadmill.

Children over the age of 12 should not use the treadmill without adult supervision.

OTHER SAFETY TIPS FOR YOUR TREADMILL

OPERATION

WARNING To reduce the risk of damaging important components on your treadmill, it is stronglyrecommended that your treadmill is plugged into a dedicated 20 amp outlet, without the use of an additional extension cord and/or power strip.

IMPORTANT: The treadmill is not compatible withGFCI-equippedoutlets.

It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

4

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

LIMITED TROUBLESHOOTING CONDITIONING TREADMILL WARRANTY & MAINTENANCE GUIDELINES OPERATION

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TROUBLESHOOTING CONDITIONING TREADMILL MAINTENANCE & GUIDELINES OPERATION

ASSEMBLY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-sideplay in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY! Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressureshocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located to the left of the on/off power switch and power cord and enter it in the space provided below.

ENTER YOUR SERIAL NUMBER AND

MODEL NAME IN THE BOXES BELOW:

SERIAL NUMBER:

MODEL NAME:

LIMITED WARRANTY

5

*Refer to the SERIAL NUMBER and MODEL NAME when calling for service.

*Also enter this serial number on your Warranty Card.

V-BRACKET

 

CONSOLE

CORE PODS

READING RACK

TOUCH PAD PANEL WITH BLUE/GREEN BACK-LITDISPLAY

WATER BOTTLE HOLDER

FAN

 

GRIP PULSE HANDRAILS

SUPPORT BARS

 

 

SAFETY KEY PLACEMENT

CONSOLE MAST

 

ON/OFF SWITCH

CIRCUIT BREAKER

POWER CORD

TRANSPORT WHEEL

MOTOR COVER

FOOT LOCK LATCH

RUNNING BELT / RUNNING DECK

SIDE RAIL

ROLLER END CAP

REAR ROLLER

ADJUSTMENT BOLTS

TOOLS INCLUDED

4 mm Allen Wrench

5 mm Allen Wrench

6 mm T-wrench

PARTS INCLUDED

1 Safety Key

1 Console Assembly (located under treadmill deck)

1 Power Cord

1 V-Bracket

2 Core Pods

2 Support Bars/Boots

4 Hardware Bags

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

NOTE : If you have questions or if there are any missing parts, we will guarantee complete satisfaction. Customer Tech Support contact information is located on the back panel of this manual.

6

LIMITED WARRANTY

IMPORTANT INTRODUCTION PRECAUTIONS

PRE-ASSEMBLY

DO NOT CUT STRAPS UNTIL STEP1-E!*Disassemble box and remove the

WARNING cardboard packaging that is not beneath the treadmill. Do not attempt to lift the treadmill at this time. Remove plastic wrap from console masts.

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your treadmill, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

ASSEMBLY

BEFORE BEGIN YOU

LIMITED TROUBLESHOOTING CONDITIONING TREADMILL WARRANTY MAINTENANCE & GUIDELINES OPERATION

ASSEMBLY STEP 1

HARDWARE BAG FOR STEP 1 CONTENTS :

LEFT CONSOLE MAST

BOLT A

LEFT SIDE LINKAGE ARM

A Open HARDWARE BAG FOR STEP 1.

BLift LEFT CONSOLE MAST into upright position. Be sure to hold the console mast firmly, as it will not stay in the upright

position on it’s own.

CMove LEFT SIDE LINKAGE ARM into position. Insert BOLT (A) and tighten.

D Repeat on the right side.

ENow cut the banding straps and remove remaining packaging material.*

*NOTE: If the straps have been removed before completing step 1-Dand the linkage arms can not be aligned, refer to the TROUBLESHOOTING section (page 26) in order to restore the treadmill to its proper position.

 

 

F Lift the RUNNING DECK until lock

 

 

latch on side of treadmill is fully

 

 

engaged.

 

1

 

 

 

G Remove CONSOLE from box

 

3

and place out of the way.

 

 

 

 

H Lower the treadmill RUNNING

 

2

DECK from the folded position by

 

stepping on LOCK LATCH on lower

 

 

7

 

right side.

 

 

ASSEMBLY STEP 2

HARDWARE BAG FOR STEP 2 CONTENTS :

 

 

 

 

 

 

 

 

 

 

 

 

CONSOLE CABLE

LOCK

 

WASHER (C)

ARC WASHER (D)

 

BOLT (B)

 

ARC WASHER (D)

DO NOT ATTACH

THIS SIDE UNTIL STEP 2-F

AOpen HARDWARE BAG FOR STEP 2.

BWith running deck in lowered position, place CONSOLE

on upright masts. Slide the brackets that are underneath the console into the top holes of the upright masts.

CPlace LOCK WASHER (C) and

BOLT (B) into flat side of LEFT upright MAST and lightly tighten.

DPlace ARC WASHER (D) and

BOLT (B) into curved side of LEFT upright MAST and lightly tighten.

* Be sure to tighten bolts after all are lined up.

E

Gently lift RIGHT side of

 

the console to connect the

ASSEMBLED IN STEP 2-D

CONSOLE CABLE. Carefully tuck

 

 

wires in mast to avoid damage.

 

NOTE: Do not pinch console

 

cable or grip pulse wires.

F Repeat steps C-Dabove to

 

assemble the right side upright

 

mast and console.

G Tighten all bolts completely.

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

8

LIMITED WARRANTY

IMPORTANT INTRODUCTION PRECAUTIONS

ASSEMBLY

BEFORE BEGIN YOU

TROUBLESHOOTING CONDITIONING TREADMILL MAINTENANCE & GUIDELINES OPERATION

ASSEMBLY STEP 3

HARDWARE BAG FOR STEP 3 CONTENTS :

 

 

 

 

 

 

 

MOUNTING BRACKET

SUPPORT BARS

SUPPORT BAR BOOTS

BOLT (E)

 

(8 TOTAL)

 

AOpen HARDWARE BAG FOR STEP 3.

BSlide SUPPORT BARS into side

MOUNTING BRACKETS and line up with top MOUNTING BRACKETS.

CInsert 2 BOLTS (E) into the tops and 2 BOLTS (E) into the bottoms of each SUPPORT BAR.

DSlide SUPPORT BAR BOOTS down to cover BOLTS (E).

LIMITED WARRANTY

9