HoMedics SS-5010 User Manual

0 (0)

Distributed by

®

HoMedics Service Center 1.800.466.3342

8:30 – 5:00 p.m. (EST) M – F

Dirección postal: HoMedics Consumer Relations

Service Center Dept. 168 3000 Pontiac Trail

Commerce Township, MI 48390

Correo electrónico: cservice@homedics.co

Garantía limitada por un año

HoMedics vende sus productos con la intención de que no tengan defectos de fabricación ni de mano de obra por un plazo de un año a partir de la fecha de compra original, con las siguientes excepciones.

HoMedics garantiza que sus productos no tendrán defectos de material ni de mano de obra bajo condiciones de uso y servicio normales. Esta garantía se extiende únicamente a consumidores y no a distribuidores.

Para obtener servicio para su producto HoMedics, envíe por correo el producto y su recibo de compra fechado (como comprobante de compra), con franqueo pago, a la siguiente dirección:

HoMedics Consumer Relations Service Center Dept. 168 3000 Pontiac Trail

Commerce Township, MI 48390

No se aceptarán pagos contra entrega.

HoMedics no autoriza a nadie, incluyendo, pero sin limitarse a, distribuidores, posteriores consumidores compradores del producto a un distribuidor, o compradores remotos, a obligar a HoMedics de forma alguna más allá de las condiciones aquí establecidas. La garantía de este producto no cubre daños causados por uso inadecuado o abuso, accidente, conexión de accesorios no autorizados, alteración del producto, instalación inadecuada, reparaciones o modificaciones no autorizadas, uso inadecuado de la fuente de energía/ electricidad, cortes de energía, caída del producto, funcionamiento incorrecto o daño de una pieza de funcionamiento debido al no cumplimiento del mantenimiento recomendado por el fabricante, daños durante el transporte, robo, descuido, vandalismo, condiciones climáticas, pérdida de uso en el período durante el cual el producto está en una instalación de reparación o a la espera de piezas o reparación, o cualquier otra condición, sin importar cual sea, que se encuentre fuera del control de HoMedics.

Esta garantía es válida únicamente si el producto es comprado y operado en el país en el cual se compró el producto. Un producto que requiera modificaciones o adaptación para habilitar su funcionamiento en

cualquier país que no sea aquél para el que fue diseñado, fabricado, aprobado y/o autorizado, o la reparación de productos dañados por estas modificaciones no están cubiertos bajo esta garantía.

LA GARANTÍA AQUÍ ESTABLECIDA SERÁ LA ÚNICA Y EXCLUSIVA GARANTÍA. NO HABRÁ NINGUNA OTRA GARANTÍA EXPRESA NI IMPLÍCITA, INCLUYENDO NINGUNA GARANTÍA DE COMERCIALIZACIÓN O APTITUD NI NINGUNA OTRA OBLIGACIÓN POR PARTE DE LA COMPAÑÍA CON RESPECTO A PRODUCTOS CUBIERTOS POR ESTA GARANTÍA. HOMEDICS NO TENDRÁ RESPONSABILIDAD ALGUNA POR NINGÚN

DAÑO INCIDENTAL, CONSECUENTE NI ESPECIAL. BAJO NINGÚN CONCEPTO ESTA GARANTÍA REQUERIRÁ MÁS QUE LA REPARACIÓN O CAMBIO DE ALGUNA PIEZA O PIEZAS QUE SE HALLEN DEFECTUOSAS DENTRO DEL PERÍODO DE VIGENCIA DE ESTA GARANTÍA. NO SE EFECTUARÁN REEMBOLSOS. SI NO HAY PIEZAS DE REPUESTO DISPONIBLES PARA LOS MATERIALES DEFECTUOSOS, HOMEDICS SE RESERVA EL DERECHO DE REALIZAR SUSTITUCIONES EN VEZ DE REPARAR O CAMBIAR.

Esta garantía no se extiende a la compra de productos abiertos, usados, reparados, embalados otra vez y/o abiertos y vueltos a cerrar, incluyendo entre otras cosas la venta de dichos productos en sitios de remate por Internet y/o la venta de dichos productos por revendedores o mayoristas. Todas y cada una de las garantías cesarán y terminarán inmediatamente con respecto a cualquier producto o pieza del mismo que estén reparados, cambiados, alterados o modificados sin el consentimiento previo explícito y por escrito de HoMedics.

Esta garantía le proporciona derechos legales específicos. Es posible que usted tenga derechos adicionales que pueden variar de un país a otro. Debido a las regulaciones de ciertos países, es posible que algunas de las limitaciones y exclusiones no se apliquen en su caso.

Por más información con respecto a nuestra línea de productos en los EE.UU., visítenos en: www.homedics.com

© 2009 HoMedics, Inc. y sus compañías afiliadas, reservados todos los derechos. HoMedics® y SoundSpa® son las marcas registrada de HoMedics, Inc. y sus compañías afiliadas. Reservados todos los derechos.

IB-SS5010A

Distributed by

®

CLOCK RADIO SOUND MACHINE WITH

TIME PROJECTION & TEMPERATURE READING

SOUNDSPA®

PREMIER

Instruction Manual and

 

Warranty Information

SS-5010

El manual en español empieza a la página 17

Create your perfect sleep environment.

Thank you for purchasing SoundSpa Premier, the HoMedics acoustic relaxation machine. This, like the entire HoMedics product line, is built with high-quality craftsmanship to provide you years of dependable service. We hope that you will find it to be the finest product of its kind. SoundSpa helps create your perfect sleep environment. Fall asleep to any of its six calming sounds, then wake to sound, radio or alarm. SoundSpa Nature Sounds can also mask distractions to improve your concentration while you read, work or study.

IMPORTANT SAFETY INSTRUCTIONS:

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

DANGER - To reduce the risk of electric shock:

Always unplug the appliance from the electrical outlet immediately before cleaning.

Do not reach for an appliance that has fallen into water. Unplug it immediately.

Do not place or store appliance where it can fall or be pulled into a tub or sink.

Do not place in or drop into water or other liquid.

WARNING - To reduce the risk of burns, fire, electric shock or injury to persons:

Close supervision is necessary when this appliance is used by or near children, invalids or disabled persons.

Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by HoMedics; specifically any attachments not provided with the unit.

Caution: All servicing of this product must be performed by authorized HoMedics Service Personnel only.

Never operate this appliance if it has a damaged cord, plug, cable or housing. If it is not working properly, if it has been dropped or damaged, return it to Homedics Service Center for examination and repair.

Keep cord away from heated surfaces.

Never drop or insert any object into any opening.

Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

Do not carry this appliance by power cord or use cord as handle.

To disconnect, remove plug from outlet.

This appliance is designed for indoor use only. Only the remote sensor should be used outdoors.

Only set on dry surfaces. Do not place on surface wet from water or cleaning

SAVE THESE INSTRUCTIONS

Caution ­– Please read all instructions carefully before operating.

Never leave the appliance unattended, especially if children are present.

Never cover the appliance when it is in operation.

This unit should not be used by children without adult supervision.

Always keep the cord away from high temperature and fire.

Do not lift, carry, hang, or pull the product by the power cord.

If the adaptor sustains damage, you must stop using this product immediately and contact the HoMedics Service Center. (See the warranty section for the HoMedics address.)

2

3

HoMedics SS-5010 User Manual

Figure 1

 

 

Projection

 

 

 

 

Snooze

 

 

Sounds

 

 

 

 

 

 

LCD Display

 

 

 

 

 

Remote Sensor

Volume

 

 

Tuner

Adaptor

 

 

 

Timer

Radio

Power

Alarm Set

 

SoundSpa Clock Radio Features

6 Nature Sounds: rain forest, ocean, thunder, summer night, rain, and waterfall

Automatic Daylight Savings Time Adjustment

Indoor and outdoor temperature

Dual alarm

AM/FM radio with alarm and snooze

Three gentle-wake options - radio, alarm or soothing sound

Easy-to-read LCD display

Projection feature projects time and temperature on the ceiling or wall

Auto-timer lets you choose how long you listen - 15, 30, 45 or 60 minutes

Volume control adjusts the volume of the radio, beep, or sounds

4

Figure 2

 

 

 

AM Indicator

 

 

Alarm Bell

 

 

Figure 3

 

 

Focus Knob

 

 

Time Rotation Knob

Projector

 

 

 

Projector Tube

On/Off Switch

Indoor Temperature

Outdoor Temperature

Backlight

 

 

 

 

High/Low/Off

 

 

Button

 

 

C/F Button

 

Tuner

 

 

 

Volume

 

 

DC Jack

 

 

Antenna

Figure 4

Time Zone

DST

12/24

5

Assembly and Instructions for Use

1.Unpack the product and check to make sure everything is included (Fig. 1).

2.This unit is powered by a DC adaptor.

3.The battery power is designed only to provide MEMORY BACK-UP for the clock and alarm settings. One CR2032 battery (included) is inserted into the battery compartment if memory back-up is desired (in the event of power outages or if the unit is unplugged). The memory back up will keep track of the time and as soon as the power supply returns, the display will indicate the correct time, and the functions will become available again.

4.Attach the adaptor into the DC jack on the base of the unit (Fig. 3) and insert the cord into a 120V household outlet.

Setting Time

SETTING THE CLOCK (Fig. 3):

1.Slide the Time Zone switch to the correct zone. (P=Pacific/M=Mountain/ C=Central/E=Eastern)

2.Slide the 12/24 switch to the desired setting (24 indicates Military time).

3.Slide the DST switch to either ON or OFF to set your clock to automatically adjust for the Daylight Savings Time (DST).

To set the DATE/TIME (Fig 1):

Press and hold the DATE/TIME SET button.

1.The year will flash. Use the +/- buttons to set year.

2.When year is set, press DATE/TIME SET button. Month and day will flash. Press the +/- buttons to set month. When month is set, press the DATE/TIME SET and use the +/- buttons to set day.

3.When month and day are set, press DATE/TIME SET. Hour will flash. Use the +/- buttons to set hour. NOTE: AM/PM choice will be made at this time.

4.When hour is set, press the DATE/TIME SET button. Minutes will flash. Use the +/- buttons to set minutes. Minutes will flash for 10 seconds and then stop. Your clock is set.

Note: A PM indicator will appear in the upper left hand corner of the LCD display during the PM hours. Be sure to set the time for the correct 12-hour period - AM (morning) or PM (evening).

Listening to Nature Sounds

1.Select the sound you wish to listen to and press the corresponding button (Fig. 1).

2.To adjust the volume, turn the VOLUME knob (Fig. 1) to your desired level.

3.When finished listening to the sounds you may turn them off by pressing the POWER button, or switch to the radio by pressing RADIO (Fig. 1).

Note: When the unit is turned on it will always default to the last mode used.

Listening to the Radio

1.Press the RADIO button (Fig. 1).

2.Press the RADIO button to choose AM/FM.

3.Rotate the TUNER (Fig. 1) to select a radio station.

4.To adjust the volume turn the VOLUME knob (Fig. 1) to your desired level.

5.When finished listening to the radio you may turn it off by pressing the

POWER button. (Fig. 1)

Note: Adjust the antenna on the back of the unit to better the radio reception if needed. (Fig. 3)

Using the Auto-Timer

When the power is on and you are listening to a nature sound or the radio you may set a timer so the unit will automatically turn off.

1.Toggle through the TIMER button (Fig. 1) until you find the time of your choice, 15, 30, 45 or 60 minutes.

2.To cancel the timer, toggle through the TIMER button until the LED light says “OFF” or press POWER (Fig. 1).

6

7

Setting and Using The Alarm

Setting and using Alarm 1 or Alarm 2 (Individually)

1.Press and hold the Alarm 1 button. The hour will flash (Fig. 1)

2.Using the +/- buttons on the back (Fig. 3), set the hour.

3.Press the Alarm 1 button again and the minutes will flash. Use the +/- keys to set the minutes.

4.The Alarm 1 time will show under the main clock display.

5.To activate the alarm and choose a wake tone, press the Alarm 1 button to scroll through the wake tone options: Beep, Radio or Sound. (Fig. 1)

NOTE: When using the sound mode, the unit will set to the last sound you listened to. If you wish to change it press the sound you wish to wake to and then press the POWER button (Fig 1).

6.Once your choice is made, a (%) will appear next to the Alarm 1 time. Your alarm is set.

7.To set a second alarm, repeat steps 1-6 above, using the Alarm 2 button.

8.When the alarm sounds you may:

a.Press the SNOOZE button (Fig. 1). Your sleep time will be extended by 9 minutes. You may use this feature until you turn the alarm off.

b.Turn OFF: Press the POWER button to turn off the alarm. Your alarm will turn off but remain set for the next day. If you wish to turn the alarm off completely or choose a different wake tone, repeat steps 1-6 in “SETTING AND USING THE ALARM”

NOTE: If the alarm sounds for 30 minutes continuously it will automatically turn off.

Using the “Nap” Feature

1.Press the snooze button to toggle through your choice of nap length (15, 30, 45 or 60 minutes). (Fig. 1)

2.Once set, the clock will display the time and indicate “nap” on the LCD screen.

3.When nap alarm sounds, press the power button to turn off. (Fig. 1)

Using the Projection Feature

1.To turn the projection feature on, press the projector ON/OFF button (Fig. 3) on the back of the unit. The time & outdoor temperature is now projected on the wall or ceiling.

NOTE: If the projection feature is OFF, you may hit the SNOOZE button (Fig. 1) to trigger 5 seconds of projection.

2.The angle of the projector can be adjusted to angle on the ceiling or wall by moving the PROJECTOR TUBE (Fig. 3) forward or backward.

3.To turn the angle of the time & temperature that appears on the wall or ceiling, rotate the TIME ROTATION KNOB (Fig. 3) until you have reached your desired result.

NOTE: The TIME ROTATION KNOB will rotate up to 350 degrees.

4.To focus the time & temperature on the wall or ceiling rotate the FOCUS KNOB (Fig. 3) until you have reached your desired result.

Using Indoor Temperature

The unit will begin reading indoor temperature when it is plugged in. Allow a few minutes for the correct temperature to register on the LCD display. (Fig. 2)

Using Outdoor Temperature

Be sure the SoundSpa unit is plugged in prior to the remote sensor battery installation.

8

9

Loading...
+ 9 hidden pages