Hitachi DZ-HS301EUK, DZ-HS303EUK, DZ-HS303E, DZ-HS300EUK, DZ-HS301E User Manual

...
0 (0)

English

DZ-HS303E/DZ-HS301E/DZ-HS300E

DZ-HS303E(UK)/DZ-HS301E(UK)/DZ-HS300E(UK)

 

Français

DZ-HS303E

DZ-HS301E

 

 

DZ-HS300E

Instruction manual

Bedienungsanleitung

To obtain the best performance and ensure years of trouble-free use, please read this instruction manual completely.

Mode d’emploi

Des performances optimales et un fonctionnement à long terme seront assurés en appliquant les présentes instructions après avoir entièrement lu ce mode d’emploi.

DVDCAM PC Software Support Centre

URL http://dvdcam-pc.support.hitachi.ca/

Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch, um durch richtige Bedienung jahrelangen und störungsfreien Betrieb zu gewährleisten.

Support Centre phone numbers for software provided: Telefonnummern des Support-Centers für die mitgelieferte Software: Numéros de téléphone de l’Assistance Clientèle pour le logiciel fourni : PIXELA CORPORATION

UK, Germany, France and Spain: 800-1532-4865 (Toll-free) Other countries: +44-1489-564-764

Languages available: English, French, German, Spanish URL: http://www.pixela.co.jp/oem/hitachi/e/index.html

English

Important Information

For Your Safety

The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the camera/recorder is to be left unattended for a long period of time, turn it off.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE

RECOMMENDED ACCESSORIES ONLY.

The DVD video camera/recorder and AC adapter/charger have the following caution marks.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Identifications of caution marks

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully to avoid any problems.

Precautions

WARNING: Many television programmes and films are copyrighted. In certain circumstances, copy-right law may apply to private in-home videotaping of copyrighted materials.

The liquid crystal display (LCD) panel is made by highly precise technology. More than 99.99% of its picture elements (pixels) are effective, but some (less than 0.01%) may appear as coloured bright dots. This does not indicate a fault as the LCD panel stretches the limits of current technology.

WARNING: To prevent risk of injury or damage to your DVD video camera/recorder and the AC adapter/charger, use only the DZ-BP14S/DZ- BP07PW/DZ-BP14SW/DZ-BP7SW battery and DZ-ACS3 (E) AC adapter/charger.

CLASS 1

LASER PRODUCT

CAUTION

This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

2

Information for users applicable in European Union countries

This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from your household wastes. There are separate collection systems for recycling in EU.

For more information, please contact the local authority or the dealer where you purchased the product.

Information für Nutzer in den Ländern der Europäischen Union

Das auf dem Produkt oder auf der Verpackung angebrachte Symbol bedeutet, dass Ihre elektrischen und elektronischen Geräte nicht mit dem Haushaltsmüll entsorgt werden sollen. Es existieren separate Recycling-Sammelsysteme in der EU.

Für mehr Informationen wenden Sie sich bitte an Ihre örtlichen Behörden oder an den Fachhändler, bei dem Sie das Produkt erworben haben.

Information utilisateurs, applicable dans les pays de l’Union Européenne

Ce symbole figurant sur le produit ou son emballage signifie que votre équipement électrique et électronique doit être mis au rebut séparément de vos déchets ménagers lorsqu’il a atteint la fin de sa durée de vie.

Il existe des systèmes de collecte séparée pour le recyclage dans l’UE.

Pour plus d’informations, veuillez prendre contact avec les autorités locales ou le revendeur auquel vous avez acheté ce produit.

Informatie voor gebruikers in landen van de Europese Unie

Dit symbool op het product of op zijn verpakking betekent dat uw elektrische of elektronische apparatuur na het verstrijken van de levensduur gescheiden van het huisvuil moet worden weggegooid.

Er zijn afzonderlijke ophaalsystemen voor recyclage in de E.U.

Voor meer informatie neemt u contact op met de plaatselijke overheid of de dealer waar u het product hebt gekocht.

Information till användare inom Europeiska unionen

Märkningen av produkter och förpackningar med denna symbol betyder att elektrisk och elektronisk utrustning måste tas om hand separat från hushållssopor när utrustningen har förbrukats. EU har särskilda återvinningsanläggningar för denna typ av utrustning.

Kontakta de lokala myndigheterna eller återförsäljaren där produkten har köpts för mer information.

Informazioni per gli utenti negli Stati dell’Unione Europea

Questo simbolo sul prodotto o sull’imballaggio indica che l’apparato elettrico o elettronico alla fine del suo periodo di vita dovrebbe essere smaltito separatamente dai rifiuti domestici.

Nell’UE esistono altri sistemi di raccolta differenziata.

Per ulteriori informazioni, contattare le autorità locali o il rivenditore presso il quale è stato acquistato il prodotto.

Información para usuarios aplicable en los países de la Unión Europea

Este símbolo en el producto o en su embalaje significa que debería deshacerse de su equipo eléctrico o electrónico, al final de su vida útil, de forma separada del resto de los residuos domésticos. Para estos productos hay sistemas de recogida selectiva para reciclarlos en la Unión Europea.

Para más información, rogamos contacte con la autoridad local o el distribuidor donde adquirió el producto.

English

3

English

Important for United Kingdom

(for DZ-HS303E (UK) / DZ-HS301E (UK)/DZ-HS300E (UK))

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.

Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers are available from your dealer.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code: Blue= Neutral, Brown= Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.

The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. On no account connect either of these wires to the terminal marked E or by the earth symbol or coloured green or green and yellow.

4

IMPORTANT SAFETY INSTRUCTIONS

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/ recorder and accessory equipment.

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Protect the mains lead from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10Only use attachments/accessories specified by the manufacturer.

11Use only with the cart, stand,

tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12Unplug this apparatus during lightning storms or when unused for long periods of time.

13Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as mains lead or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

15The equipment (AC Adapter/Charger) shall be used near the socket-outlet and shall be easily accessible.

English

5

English

Cautions on HDD

Save the data recorded on HDD:

To back up the data recorded on HDD, save it on a DVD. It is also recommended that you use this DVD video camera/recorder to dub the data. You can also use a PC to save the data on a DVD.

It is recommended that you periodically save your recordings.

Do not subject the DVD video camera/recorder to any vibrations or impact:

This could result in the HDD not being recognised or recording, playback or dubbing to become impossible.

Do not subject this DVD video camera/recorder to any vibrations or impact especially during recording, playback or dubbing, or while the ACCESS/PC indicator is lit or blinking.

If vibrations to this DVD video camera/recorder are repeated, or the drop status of DVD video camera/recorder is detected (see page 69), recording, playback or dubbing will stop to protect the HDD in this DVD video camera/recorder.

Carefully check the temperature of this DVD video camera/recorder:

If the temperature of this DVD video camera/recorder is too high or too low, normal recording or playback may not be possible.

If the power switch is set to “HDD” with the temperature of this DVD video camera/recorder too high or too low, message “The temperature of HDD is outside the operating temperature range. Turn off power.” may appear to protect the HDD. Even if this happens, setting the power switch to “DVD” may allow you to use the DVD video camera/recorder with a DVD, so it is recommended that you carry a spare DVD even if you intend to record on the HDD.

This DVD video camera/recorder cannot be used at high altitude:

Note that the DVD video camera/recorder cannot be used in a place where the atmospheric pressure is low, such as 3,000 meters or more above sea-level.

Do not place this DVD video camera/recorder near a magnet or magnetic field:

If you so, recording, playback or dubbing may not be possible.

Please note in advance that Hitachi will not accept any liability or make compensation for loss of data, or direct or indirect damage when recording or playback is not performed normally due to a fault in this DVD video camera/recorder. This also applies to repairs on this DVD video camera/recorder (including repair of components other than HDD).

Cautions When Using

Hitachi cannot compensate for any damages caused when recording is not made normally or recorded contents cannot be played back because of a defect in the DVD video camera/ recorder, disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.

If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card, etc., the recorded contents may be lost. We cannot be responsible for compensation for damage due to loss of recorded contents.

Handle the liquid crystal display (LCD) with care:

The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a sharp object.

If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.

Do not place the DVD video camera/recorder with the open LCD screen down.

Close the LCD monitor when not using the DVD video camera/recorder.

6

Liquid crystal display (LCD) and viewfinder:

for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as coloured dots

English

The LCD screen and viewfinder are the products of highly precise technology. Among the total

 

 

number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels

 

 

(red, blue, green). This shows the limitations of the current technology, and does not indicate a

 

fault that will interfere with recording.

 

The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/

 

 

recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal

 

 

brightness will be restored when the temperature inside the DVD video camera/recorder rises.

 

Hold the DVD video camera/recorder correctly:

Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.

Do not subject the DVD video camera/recorder to impact:

This DVD video camera/recorder is a precision machine. Take great care that you do not strike it against a hard object or let it fall.

When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.

No sand or dust!

Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause malfunctions or defects.

No water or oil!

Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric shock, malfunctions or defects.

Heat on surface of product:

The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly warm, but this does not indicate a fault.

Screen on connected TV:

Never leave the Disc Navigation screen, still image or camera image displayed on your TV to which the DVD video camera/recorder is connected: Doing so could result in displayed image retention or phosphor degradation of TV screen.

Be careful of ambient temperature:

If the temperature of this DVD video camera/recorder is too high or too low, normal recording/ playback may not be possible.

Take care that the temperature of this DVD video camera/recorder, when connected to PC does not rise excessively (reference for usage: approx. 30 minutes at about 30ºC).

Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the temperature is very high for a long time: This could cause malfunctions.

Do not point directly at the sun:

If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction or a fire could occur.

Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This could cause malfunctions.

Do not use the DVD video camera/recorder near TV or radio:

This could cause noise to appear on the TV screen or in radio broadcasts.

Do not use the DVD video camera/recorder near strong radio waves or magnetism:

If the DVD video camera/recorder is used near strong radio waves or magnetism, such as a radio wave tower or electric appliances, recording or playback may stop, or noise could enter the video and audio that are being recorded. During playback of normally recorded video and audio, noise may also be present in picture and sound.

At worst the DVD video camera/recorder could malfunction.

Do not expose the DVD video camera/recorder to soot or steam:

Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.

7

Do not use the DVD video camera/recorder near corrosive gas:

English

If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated

 

 

 

by petrol or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot spring

 

 

area, the external or internal terminals could corrode, which would disable normal operation, or

 

 

the battery connecting terminals could corrode, so power will not turn on.

Do not use the DVD video camera/recorder near ultrasonic humidifier:

With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere to the optical head of the DVD video camera/recorder, which could cause it to operate abnormally.

Do not expose the DVD video camera/recorder to insecticide:

Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block for DVD, and in such a case the DVD video camera/recorder might not operate normally. Turn the DVD video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.

Do not use a generally available 8 cm CD lens cleaner:

Cleaning the DVD lens is not necessary when using this DVD video camera/recorder in the usual way.

Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.

If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.

Be careful of moisture condensation:

When you move the DVD video camera/recorder between places where the difference in temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or vehicle – condensation (vapour in air warmed or cooled to water droplets) could occur on the lens and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft, dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2 hours before using it again.

Do not use the DVD video camera/recorder for a long uninterrupted period of time:

This DVD video camera/recorder cannot be used for a long time continuously as a surveillance camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video camera/recorder could exceed the limit and the recording/playback operation may slow down or other faults could occur. If this happens, turn it off and wait for a while before using it again.

8

Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or CARD ACCESS indicator is lit or blinking:

The ACCESS/PC or CARD ACCESS indicator is lit or blinking to show that data is being written to disc or card, or being read from it. At this time, do not do any of the following, so as not to damage the data:

Remove battery

Disconnect AC adapter/charger

Plug or unplug PC connection cable

Remove disc or card

Subject DVD video camera/recorder to severe vibrations or impact

Violently open or close the LCD monitor

The ACCESS/PC indicator will light for a while after recording is finished. While it is lit, do not subject the DVD video camera/recorder to any vibration or impact, and do not disconnect the battery or AC adapter/charger.

If you turn the DVD video camera/recorder off while the ACCESS/PC or CARD ACCESS indicator is lit or blinking, turn it on again with the disc or card loaded in it: Repair of the disc or card will be executed automatically (see page 137).

ACCESS/PC indicator

CARD ACCESS indicator

Do not wipe the DVD video camera/recorder case with benzene or thinner:

The coating of case could peel off or the case surface could deteriorate.

When using a chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

For optional accessories, observe the cautions and follow instruction manuals attached.

The battery provided has not been charged at time of purchase:

Charge it before using the DVD video camera/recorder (see page 30).

The battery will discharge as time passes. (The battery is produced so that it discharges on its own in order to protect its characteristics.)

Disc cannot be inserted or removed unless a charged battery or AC adapter/ charger is connected to the DVD video camera/recorder.

Be sure to set the power switch to “OFF” when turning the DVD video camera/ recorder off:

Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being powered could cause a fault.

English

9

English

Cautions When Storing

Do not leave the DVD video camera/recorder in a place where the temperature is very high for a long period of time:

The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave the DVD video camera/recorder in such a place, it could malfunction or the case could be damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a heater.

Do not store the DVD video camera/recorder in a place where the humidity is high or in a dusty place:

Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high, the lens could be mouldy, and the DVD video camera/recorder could become inoperable. It is recommended that you put the DVD video camera/recorder with desiccant in a box when storing it in a closet, etc.

Do not store the DVD video camera/recorder in a place subject to strong magnetism or intense vibrations:

This could cause malfunctions.

Detach the battery from the DVD video camera/recorder and store it in a cool place:

Leaving the battery attached or storing it at high temperature could shorten its life.

Suggestions and Restrictions

Make a trial recording:

Always make a trial recording before doing actual recording to make sure that recording is normal. The data that have not been stored normally because of a defect in the DVD video camera/ recorder cannot be restored.

It is recommended that you use the HDD from which recorded contents can be deleted for trial recording.

Do not use the DVD video camera/recorder for professional applications:

This DVD video camera/recorder is designed and produced for home-use recording and playback.

Copyright:

Data recorded on the HDD/disc/card in this DVD video camera/recorder using other digital/ analog media or devices are protected by the copyright act and cannot be used without permission of the owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some demonstrations, performances and exhibitions, even for personal enjoyment.

10

*
PHOTO SELECT
Fig. 1
PLAY
0 01/ 006
A l l Pr og r ams
Block noise
(Recording one scene may produce multiple thumbnails.)
PHOTO SELECT
PLAY
001 / 002
A l l Pr ogr ams

CLEANING

Be sure to set the power switch to “OFF” before cleaning this DVD video camera/recorder.

Cleaning LCD screen and camera lens

Use dry, soft cloth to wipe dirt off. When cleaning the LCD screen, be careful not to use force, scratch it, or subject it to impact: Doing such could cause a defect in the screen, result in display unevenness, or damage the LCD monitor.

If dust adheres to the viewfinder lens, remove it using a cotton swab, etc.

Do not rub the lens with force: Doing so could scratch the lens.

Cleaning DVD Video Camera/ Recorder Case

Do not wipe the DVD video camera/recorder case hard with any foreign object, such as grit, adhering to it, and do not use rough fabrics to clean the case: Doing so could scratch it.

Use soft cloth, etc. to gently wipe dirt off the case.

Do not use benzene or thinner to clean DVD video camera/recorder case

The coating of case could peel off or the case could deteriorate. Wipe off dirt on the case with a soft cloth which has been completely wrung out. When using chemical cleaning cloth, follow instructions for use.

HANDLING DISCS

Using discs

Discs are very delicate recording media. Carefully read the following cautions and observe them:

Always use a brand new disc when recording important material.

Be sure not to touch the recording surface of disc, or dirty or scratch it.

If there is dust, scratch, dirt on disc or if it is warped, the following phenomena may occur:

Block noise in playback image

Momentary stop of

playback image Sound interrupted during

playback, or abnormal sound

Blue thumbnail

display* (Fig. 1) Disc cannot correctly

be recognised

Disc cannot be initialised

Delay between video and audio

Even if disc is normal, the above phenomena may occasionally occur. While the ACCESS/ PC indicator is lit, do not subject disc to vibrations or impact, and avoid using DVD video camera/recorder at extremely high or low temperatures, or in environment where condensation is likely to occur.

When recording images,

the DVD video camera/ recorder may avoid the

portions of disc where recording is not possible, due to dust, scratches, etc. [It will pause mat such a portion and automatically restart recording (n).]

This will cause recording to be interrupted for several seconds to several minutes, and multiple thumbnails will be created by one recording session as shown above. In this case, the recordable time on disc will decrease.

Be careful when removing the disc since the metal of removal slot of DVD video camera/ recorder, and disc itself, may be hot.

Storing discs

When storing disc, replace it in the plastic case in which it was purchased.

Be careful that no condensation occurs on disc.

Do not place disc in following places:

Direct sunlight for a long time

Where humidity is high or in dusty place

Where there is heat from a heater, etc.

English

11

English

DISC CLEANING

Use the disc cleaning cloth provided to lightly wipe off any dirt adhering to the disc as shown in the figure. Do not wipe the disc with force:

Doing so could cause scratches.

Never use solvent (thinner, water, antistat or detergent) for cleaning.

Lightly wash the dirty cleaning cloth with detergent: The dirt removal capacity of the cloth will improve (rinse the cloth well with water so that no detergent remains).

Use the disc cleaning cloth to clean from inner to outer edges in axial direction.

NOTE WHEN TRANSFERRING OR DISCARDING DISCS AND SD MEMORY CARDS:

The “Format” function on this DVD video camera/recorder will only change the file control information: It will not completely delete the data in the built-in hard disk; your personal data could leak out. To prevent the data from leaking out, execute complete deletion of HDD (see p. 107).

“Formatting” or “deletion” using the functions of DVD video camera/recorder or PC will change only the file control information: It will not completely delete the data on disc or memory card.

When transferring or discarding a disc or memory card, it is recommended that you physically destroy it or use deletion exclusive software (generally available) to completely delete the data on it. It is user’s responsibility to control the data on disc and memory card.

Hitachi will not accept any responsibility for leaking of personal data.

Read This First

To guide you, we have included following five chapters.

The section on “Setups” explains how to set up the DVD video camera/recorder, battery, and set the date/time.

The section on “Basic Techniques” explains the basic operation of this DVD video camera/ recorder – recording of movies, still images and playback of recorded images.

The section on “Disc Navigation” explains editing with Disc Navigation: Refer to this section when dubbing from HDD to disc, finalising a DVD-RW/DVD-R/+RW and initialising a DVD-RAM/DVD-RW/+RW.

The section on “Connecting to PC” explains the contents of provided CD-ROM and how to install the software included.

“Subsidiary Information” includes an

introduction to products sold separately, and troubleshooting.

We want this manual to be as helpful as possible, so it includes two easy ways to find the information you need:

A quick index for the information you use most often.

A detailed table of contents directing you to specific information quickly (see pages 15 – 17).

Get to know your DVD video camera/recorder by using this manual, and get to know Hitachi. We appreciate your business.

Quick Index

 

Available Discs.................................................

27

Recording Movie ..............................................

44

Playing Back ....................................................

73

Functions Available with Disc Navigation.........

80

Dubbing on DVD ..............................................

83

Connecting to a TV ........................................

112

Connecting to PC...........................................

116

With this DVD video camera/recorder you can view the picture being recorded or the playback picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor switches the picture to appear on the LCD monitor or in the viewfinder.

It is possible to switch the language in the on-screen display of this DVD video camera/recorder (see page 37).

12

About This Manual

Displays in this manual

Understand that the displays are different from those you will actually see in the viewfinder or on the LCD screen.

Notation of cancel button

Press the STOP/EXIT button to stop your operation midway, or return the menu screen to the preceding one. The expression “press the Cbutton” will be used in this text.

HDD , 1, <, >, 2, /and 3marks beside headings

Some functions of this DVD video camera/recorder are unavailable with HDD/disc/card used. Refer to the marks at right above each function to identify whether the HDD/disc/card is compatible with the function. Refer to these marks and identify the functions and operation to match the HDD/disc card you use.

Illustrations in this manual

Although the external appearances of DZ-HS303E / HS301E / HS300E are different, the method of operating these models is identical.

The illustrations of DZ-HS303E are used for the explanation in this text.

This instruction manual shows six DVD video camera/recorder models - DZ-HS303E, DZHS301E, DZ-HS300E, DZ-HS303E (UK), DZ-HS301E(UK) and DZ-HS300E(UK).

The DZ-HS303E and DZ-HS303E (UK) functions and specifications are referred to as “DZHS303E”.

The DZ-HS301E and DZ-HS301E (UK) functions and specifications are referred to as “DZHS301E”.

The DZ-HS300E and DZ-HS300E(UK) functions and specifications are referred to as “DZHS300E”.

No model names are mentioned for functions and specifications common to all models; if there are any differences between models, the model names are specified.

Microsoft®, Windows®, Windows® Me, Windows® 2000 Professional, and Windows® XP are registered trademarks of Microsoft Corporation.

Intel®, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc.

IBM® and PC/AT® are registered trademarks of International Business Machines Corporation. Manufactured under licence from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Other company names and product names listed are trademarks or brand names belonging to each individual company.

SD logo is a trademark.

English

13

English

Introduction

Recording is possible on both HDD and DVD: In FINE mode, recording for up to 3 hours is possible on HDD; up to 30 minutes on DVD. (p. 44, 154)

Dubbing to an 8 cm DVD can be performed on this DVD video camera/recorder using only one button: Simple dubbing without a DVD recorder or PC.(p. 83)

You can capture photos from videos. (p. 75)

You can record an image displayed during playback of video as a photo on a card.

You can start recording immediately after stopping playback (p. 44, 74)

Unlike tape devices, you do not need to search for the recording start position or locate the beginning of blank portion.

You can stop playback and immediately start recording: New recording will not overwrite any previously recorded data.

You can immediately play back desired recorded scenes (p. 73)

You do not need to rewind, unlike recorders using tape.

You can select any scene you want and immediately play it back (using Disc Navigation function).

Use Disc Navigation to create your original movie (p. 98)

You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play List). To edit the scenes recorded on the HDD, use the dubbing function to easily create a DVD from the edited original movie. If you edit the scenes recorded on a disc, you can play back the edited original movie and easily dub it on another DVD recorder or VCR.

Create original DVDs on PC (p. 116)

You can create an original DVD, using the provided software CD-ROM.

The created DVD disc can be played back on DVD player/recorder, DVD-ROM drive, etc.

14

Table of Contents

Important Information .........................................

2

For Your Safety ..................................................

2

Precautions ........................................................

2

IMPORTANT SAFETY INSTRUCTIONS ...........

5

Cautions on HDD ...............................................

6

Cautions When Using ........................................

6

Cautions When Storing ....................................

10

Suggestions and Restrictions...........................

10

CLEANING ..........................................................

11

HANDLING DISCS ..............................................

11

DISC CLEANING.................................................

12

NOTE WHEN TRANSFERRING OR DISCARDING

DISCS AND SD MEMORY CARDS: ................

12

Setting Date and Time.....................................

36

CHANGING DISPLAY FORMAT OF DATE AND

 

TIME .................................................................

36

Initial Settings ..................................................

37

SWITCHING OPERATING SOUND ON OR OFF

(BEEP) ..............................................................

37

TURNING DVD VIDEO CAMERA/RECORDER

 

OFF AUTOMATICALLY (POWER SAVE) ........

37

CHANGING DISPLAY LANGUAGE

 

(LANGUAGE)....................................................

37

RESETTING MENU SETTINGS TO DEFAULTS

 

(RESET)............................................................

38

TURNING RECORD LED ON OR OFF

 

(RECORD LED) ................................................

38

CHANGING SETTING OF DEMONSTRATION ..38

Read This First.................................................

12

About This Manual ...........................................

13

Introduction ......................................................

14

Table of Contents.............................................

15

Checking Provided Accessories.......................

18

Names of Parts ................................................

19

LCD/EVF Setup...............................................

39

ADJUSTING BRIGHTNESS OF LCD SCREEN

 

(LCD BRIGHTNESS) AND VIEWFINDER (EVF

BRIGHTNESS) .................................................

39

ADJUSTING COLOUR DENSITY (COLOUR

 

LEVEL)..............................................................

40

ALWAYS DISPLAYING IMAGE IN

 

VIEWFINDER ...................................................

40

Setups

 

Demonstration Function ...................................

23

Setting Up the DVD Video Camera/Recorder ..

23

HOLDING DVD VIDEO CAMERA/RECORDER.. 23

ATTACHING SHOULDER STRAP ......................

23

ATTACHING LENS CAP .....................................

24

INSERTING BATTERY INTO REMOTE

 

CONTROL ........................................................

24

REMOVING BATTERY FROM REMOTE

 

CONTROL ........................................................

25

HDD/DVD/Cards ..............................................

26

HDD, Discs ..........................................................

27

INFORMATION ON DVD-R.................................

27

NOTES ON FINALISATION: ...............................

27

EXAMPLES OF DISCS THAT CANNOT BE USED

ON THIS DVD VIDEO CAMERA/RECORDER:28

AVAILABLE CARDS............................................

28

CAUTIONS FOR DISC AND CARD.........................

28

Preparations for Power Supply ........................

29

USING DVD VIDEO CAMERA/RECORDER WITH

AC ADAPTER/CHARGER................................

29

Setting Up the Battery ......................................

30

CHARGING BATTERY........................................

30

ATTACHING BATTERY TO DVD VIDEO

 

CAMERA/RECORDER.....................................

31

REMOVING BATTERY........................................

31

BATTERY REMAINING LEVEL INDICATOR......

33

EFFICIENT USE OF BATTERY ..........................

33

Turning DVD Video Camera/Recorder On and

 

Off..................................................................

34

Viewing Images................................................

35

VIEWING IMAGE ON LCD MONITOR SCREEN 35

VIEWING SUBJECT THROUGH VIEWFINDER . 35

Inserting and Removing Disc ..........................

41

Inserting and Removing Card..........................

43

Basic Techniques

 

Recording Movie .............................................

44

Recording Stills ...............................................

45

Swift Restart of Recording (SLEEP/RESTART

 

button)...........................................................

46

On-Screen Information ....................................

47

INFORMATION DISPLAY DURING

 

RECORDING ....................................................

47

Checking Flow of Menu...................................

52

Zooming ..........................................................

54

MACRO RECORDING ........................................

54

RECORDING SUBJECTS FOR STRONGER

 

WIDE-ANGLE OR TELEPHOTO EFFECT .......

55

Manually Focusing Subject .............................

56

FOCUSING DURING RECORDING....................

56

Adjusting Brightness of Image to be recorded

 

(Exposure) ....................................................

58

Compensating for Backlight ............................

58

Using Full Auto Function .................................

59

Built-in Video Flash (for DZ-HS303E only)......

60

Setting Up Camera Functions .........................

61

SELECTING SHOOTING MODE TO MATCH THE

SUBJECT

 

(SWITCHING PROGRAMME AE MODE) ........

61

RECORDING DARK SUBJECTS USING LCD

 

MONITOR LIGHT .............................................

62

ADJUSTING COLOUR (WHITE BALANCE) .......

62

English

15

English

USING THE ELECTRONIC IMAGE STABILISER

(EIS)..................................................................

64

RECORDING SUBJECT USING LARGE

 

MAGNIFICATION (DIGITAL ZOOM) ................

64

REDUCING WIND NOISE DURING RECORDING

(MIC.FILTER) ...................................................

64

Setting Up Record Functions...........................

65

SWITCHING MOVIE QUALITY (VIDEO MODE). 65

SETTING TO WIDE TV SCREEN MODE

 

(16:9 MODE).....................................................

66

SWITCHING QUALITY OF STILL IMAGE

 

(QUALITY) ........................................................

68

SELF-TIMER .......................................................

68

SETTING ON-SCREEN DISPLAY OUTPUT ON

 

OR OFF (OSD OUTPUT) .................................

69

DROP DETECTION (HDD PROTECTION).........

69

Using External Microphone..............................

70

Disc Navigation

 

Using Disc Navigation......................................

71

STARTING OR TERMINATING DISC

 

NAVIGATION....................................................

71

PLAYING BACK FROM DISC NAVIGATION

 

SCREEN...........................................................

73

ADJUSTING VOLUME DURING PLAYBACK.....

73

PLAYING BACK LATEST RECORDED

 

SCENE .............................................................

74

DELETING LAST RECORDED SCENE..............

74

CAPTURING PHOTO..........................................

75

SEARCH PLAYBACK OF MOVIE .......................

75

FRAME ADVANCE/FRAME BACK/SLOW

 

PLAYBACK OF MOVIE ....................................

75

SKIP PLAYBACK OF MOVIE..............................

76

PLAYING BACK STILLS .....................................

76

JUMPING TO SPECIFIED POINT (GO TO) .......

77

INFORMATION DISPLAY DURING

 

PLAYBACK.......................................................

78

SELECTING MULTIPLE SCENES......................

79

SELECTING CONSECUTIVE SCENES

 

TOGETHER......................................................

79

FUNCTIONS AVAILABLE WITH DISC

 

NAVIGATION....................................................

80

UNDERSTANDING FLOW OF DISC NAVIGATION

MENU ...............................................................

81

Dubbing on DVD..............................................

83

DUBBING ALL SCENES RECORDED ON HDD

 

(DUBBING ALL)................................................

83

SELECTING SCENES RECORDED ON HDD AND

DUBBING THEM

 

(SCENE SELECT DUBBING)...........................

84

Scene...............................................................

85

DELETING SCENES (EDIT – DELETE) .............

85

DIVIDING MOVIES (EDIT – DIVIDE) ..................

86

COMBINING MULTIPLE SCENES (EDIT –

 

COMBINE)........................................................

87

ARRANGING ORDER OF SCENES (EDIT –

 

MOVE) ..............................................................

87

DIRECTING SCENES EFFECTIVELY (EFFECT –

FADE) ...............................................................

88

PLAYING BACK BY SKIPPING SCENES

 

(EFFECT – SKIP) .............................................

89

CHANGING IMAGES FOR THUMBNAILS

 

(EFFECT – THUMBNAIL).................................

90

COPYING STILLS ON DVD-RAM TO CARD

 

(COPY) .............................................................

91

LOCKING SCENES ON CARD (LOCK) ..............

92

SELECTING SCENES USING MENU SCREEN

(SELECT) .........................................................

93

DISPLAYING INFORMATION USING MENU

 

SCREEN (DETAIL)...........................................

94

Programme ......................................................

95

WHAT IS “PROGRAMME”? ................................

95

SWITCHING TO THUMBNAIL DISPLAY OF

 

SPECIFIC DATE (SELECT) .............................

95

PLAYING BACK PROGRAMME (PLAY).............

96

CHANGING TITLE OF PROGRAMME (TITLE)

.. 96

Play List ...........................................................

98

WHAT IS “PLAY LIST”?.......................................

98

CREATING NEW PLAY LIST (CREATE) ............

98

SWITCHING TO DISPLAY OF EACH PLAY LIST

(SELECT) .........................................................

99

PLAYING BACK A PLAY LIST (PLAY)................

99

ADDING SCENES TO PLAY LIST

 

(EDITING PLAY LIST) ....................................

100

DELETING SCENES FROM PLAY LIST

 

(EDITING PLAY LIST) ....................................

101

ADDING SCENES USING SUBMENU FOR

 

EDITING (EDITING PLAY LIST) ....................

101

DELETING SCENES USING SUBMENU FOR

 

EDITING (EDITING PLAY LIST) ....................

102

SELECTING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ....................

102

ARRANGING ORDER OF SCENES (MOVE) ...

103

CHANGING TITLE OF PLAY LIST (TITLE).......

104

DELETING PLAY LIST (DELETE).....................

104

Go To.............................................................

105

MOVING TO BEGINNING (END) OF HDD/DVD/

CARD..............................................................

105

HDD/DVD/Card Management........................

105

INITIALISING HDD/DVD/CARD ........................

105

PROTECTION ...................................................

106

VERIFYING REMAINING FREE SPACE ON DISC

OR CARD (CAPACITY)..................................

106

UPDATING CONTROL INFORMATION OF HDD/

DVD-RAM/DVD-RW (VR-MODE) (UPDATE

 

CONTROL INFO.) ..........................................

107

DELETING DATA ON HDD (FULL FORMAT)...

107

FINALISING DVD-RW/DVD-R/+RW

 

(FINALIZE DVD) .............................................

108

ADDITIONALLY RECORDING ON FINALISED

DVD-RW (VF-MODE)/+RW

 

(UNFINALIZE DVD)........................................

109

Others ............................................................

110

DISPLAYING MOVIES OR STILLS

 

INDEPENDENTLY (CATEGORY) ..................

110

PLAYING BACK SCENES REPEATEDLY

 

(REPEAT PLAY).............................................

110

PLAYING BACK WIDE-MODE IMAGES ON 4:3

DISPLAY TV (TV TYPE).................................

111

16

SLIDE SHOW (CONTINUOUS PLAYBACK OF

STILLS)...........................................................

111

Viewing on TV Screen....................................

112

CONNECTING TO A TV....................................

112

VIEWING ON TV SCREEN ...............................

113

Playback on DVD Recorder/Player ................

114

PLAYING BACK DVD-RAM/DVD-RW

 

(VR-MODE) ....................................................

114

PLAYING BACK DVD-RW (VF-MODE)/DVD-R/

+RW................................................................

114

Recording (Dubbing) Images On Other

 

Video Devices..............................................

115

Connecting to PC

 

Software Provided..........................................

116

Requirements of available PC........................

117

Installing Software..........................................

118

Connecting to PC via PC Connection Cable..

121

USING DISC IN DVD DRIVE BUILT INTO PC.. 123

BEFORE TERMINATING PC CONNECTION

 

(UNPLUGGING PC CONNECTION CABLE)/

 

CHANGING OVER POWER SWITCH ...........

124

Using Software...............................................

125

[When using Windows]

 

USING IMAGEMIXER 3 ....................................

125

VIEWING IMAGES RECORDED ON HDD/DISC

USING PC ......................................................

125

CREATING DVD-VIDEO USING IMAGES

 

RECORDED ON HDD/DISC ..........................

127

[When using Macintosh]

 

USING PIXE VRF BROWSER EX AND

 

IMAGEMIXER VCD/DVD2..............................

130

IMPORTING IMAGES RECORDED ON DVD-

 

RAM/DVD-RW/DVD-R INTO PC TO CREATE A

DVD-VIDEO (DVD-RW/DVD-R) .....................

130

Viewing Images recorded on Disc using PC ..

133

Uninstalling Software .....................................

134

Please contact the following for inquiries on

 

provided CD-ROM .......................................

134

Cautions when connecting DVD video camera/

recorder to PC .............................................

135

Subsidiary Information

 

Introduction to Optional Accessories..............

136

CAMERA ACCESSORIES ................................

136

POWER SUPPLY ..............................................

136

Trouble Messages..........................................

137

Troubleshooting .............................................

144

System Reset.................................................

151

Major Specifications .......................................

152

STORAGE CAPACITY OF HDD/DVD/CARD....

154

RECORDABLE STILLS (PHOTOS) ON

 

CARD..............................................................

155

Index ..............................................................

156

Be sure to read the following before opening the

package of CD-ROM ..................................

158

English

17

English

Checking Provided Accessories

Make sure that you have all the following accessories in package:

Battery (model DZ-BP14S):

Battery (model DZ-BP07PW):

AC adapter/charger

For DZ-HS303E only.

For DZ-HS301E/HS300E only. Portable

(model DZ-ACS3 (E)):

Portable power supply for this DVD video

power supply for this DVD video camera/

Used to power the DVD video camera/

camera/recorder. Charge it before use.

recorder. Charge it before use.

recorder from AC outlet, or charge battery.

 

 

 

DC power cord:

Mains lead:

 

When powering the DVD video camera/

Connect between household AC outlet and AC adapter/charger.

recorder from household AC outlet, use

for DZ-HS303E,

for DZ-HS303E (UK), DZ-HS301E (UK)

this cord to connect the DVD video

DZ-HS301E and DZ-HS300E

and DZ-HS300E(UK)

camera/recorder and AC adapter/charger.

 

 

Infrared remote control

Lithium battery (model CR2032):

AV/S output cable:

(model DZ-RM4W):

For DZ-HS303E/HS301E only.

Used when viewing the picture played back

For DZ-HS303E/HS301E only.

To power the remote control.

on the DVD video camera/recorder on TV

Use to control the DVD video camera/

 

screen, or output video to another video

recorder from a distance.

WARNING: Keep

device.

 

 

 

this battery away

 

 

from children. If

 

 

swallowed, consult

 

 

a physician

 

 

immediately for

 

 

emergency

 

 

treatment.

 

Shoulder strap:

Lens cap and lens cap string:

Software CD-ROM:

Attach to the DVD video camera/recorder

Attach the lens cap when not recording, to

Use this CD-ROM when connecting the

to hang it from shoulder.

protect the lens.

DVD video camera/recorder to PC.

PC connection cable:

Disc cleaning cloth:

Use this cable when connecting the DVD

Always use this to clean discs.

video camera/recorder to PC.

 

18

Names of Parts

9

7 8

10

English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

11 12 13

(Inside the cover)

1Flash (for DZ-HS303E only) (p. 60)

2Light receiving sensor (for DZ-HS303E only)

This sensor controls the amount of light to be emitted from the built-in flash. Take care not to block with hand, etc. during recording.

3Lens cap string attachment hole (p. 24)

4Stereo microphone

Take care that the microphone is not blocked by a hand, etc., during recording.

5Recording indicator (p. 38, 44, 68)

The red indicator will light during recording.

6Infrared receiver

(for DZ-HS303E/HS301E) (p. 25)

When the remote control is used to operate the DVD video camera/recorder, this receiver will receive the infrared signal.

7Optical 10× zoom lens

(for DZ-HS303E only) Optical 15× zoom lens

(for DZ-HS301E only) Optical 25× zoom lens

(for DZ-HS300E only) (p. 54)

14

8Lens hood (for DZ-HS303E/HS300E only) (p. 55)

Always remove this lens hood when using the optional tele-conversion or wideconversion lens.

9Zoom lever (p. 54, 56, 73)

To adjust the zoom or volume.

10Accessory shoe (for DZ-HS303E only) (p. 60)

The optional video flash can be attached here. (See the instruction manual of device to be attached for details.)

11PC connection terminal (TO PC) (p. 121)

12AV output jack (p. 112, 115)

13External microphone jack (for DZ-HS303E/ HS301E only) (p. 70)

14Wide-screen colour liquid crystal display (inside) (p. 35)

Although the external appearances of DZHS303E, DZ-HS301E and DZ-HS300E are different, the method of operating these models is identical. DZ-HS303E illustrations are used in this manual.

19

English

15

16

 

 

 

17

18

19

20

21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22

23

24

25

26

15 Viewfinder (p. 35)

16 Dioptre control (p. 35)

To adjust the focus of image appearing in the viewfinder. (Pull out the viewfinder.)

17 SLEEP/RESTART button (p. 46)

To switch the sleep/restart status between ON and OFF.

18 ACCESS/PC indicator (p. 9, 44)

Will blink or light when the HDD/DVD is accessed (write or read), or the DVD video camera/recorder is connected to a PC.

19 PHOTO/SELECT button (p. 45, 79, 93)

20 DISC EJECT button (p. 41)

Press down and release this button to open the cover of DVD insertion block.

21 DVD insertion block (p. 41)

27

22 BATTERY EJECT button (p. 31)

Press this button when removing the battery.

23 Battery attachment platform (p. 31)

24 Record button (REC) (p. 44)

25 LOCK switch (p. 44)

It is recommended that you set the LOCK switch to L(to the upper position) to prevent the power switch in the “HDD” position from accidentally moving to “DVD”.

26 Power switch (p. 34)

27 Hand strap (p. 23)

20

28

29

30

31

32

33

34

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35

36

37

38

39

40

41

42

43

44

28 FULL AUTO button (p. 59)

To switch the DVD video camera /recorder to full automatic.

29 FOCUS button (p. 56)

To switch between manual focus and autofocus.

30 MENU button (p. 36, 52, 86)

Press this button to display the menu for setting camera functions and Disc Navigation.

31 DISC NAVIGATION button (p. 71)

32 DUBBING button (p. 83)

33 STOP/EXIT button (p. 13, 52, 74)

To end playback or cancel setting of menu.

34 EXPOSURE button (p. 58)

Press this button to adjust the exposure.

35 Speaker (p. 73)

36 RESET button (p. 151)

To reset all settings to defaults (status when the DVD video camera/recorder was shipped from the factory).

37 DISPLAY (Screen display) button (p. 47, 78)

Press this button to display the details of image being played back or camera setting status, or switch the display off.

38 CARD ACCESS indicator (p. 9, 45)

39 QUICK MENU button (p. 52)

To display only the functions that you frequently use (simple menus).

40 FINALIZE button (p. 108)

Press this button to finalise the recorded DVD-RW/DVD-R/+RW.

41 Card insertion block (p. 43)

42BLC (backlight compensation) button (p. 58)

Press this button when subject is being lighted from rear.

43f/ e/ d/ c/ Abuttons

(p. 36, 52, 56, 58, 74, 75, 76)

Use these buttons to select a scene or menu item, and then press the centre (A) to play back the scene, or designate an option from the menu.

These buttons are also used to adjust the exposure or focus.

44Tripod threaded hole

Used to attach the DVD video camera/ recorder to a tripod.

English

21

English

45

 

 

REC

PHOTO

DISPLAY

46

 

52

MENU

DIGITAL

ZOOM

ZOOM

 

47

53

SELECT

54

48

55

 

56

49

57

DELETE

58

50

59

DISC

60

NAVIGATION

51

 

 

 

 

 

 

45

PHOTO button (p. 45)

53

ZOOM T button (p. 54)

46

REC button (p. 44)

54

DIGITAL ZOOM button (p. 54)

47

MENU button (p. 36, 52, 86)

55

ZOOM W button (p. 54)

48

SELECT button (p. 79, 93)

56

Reverse skip button (p. 76)

49

Reverse search button (p. 75)

57

Forward search button (p. 75)

50

DELETE button (p. 85)

58

Play/pause button (p. 74)

51

DISC NAVIGATION button (p. 71)

59

Stop button (p. 13, 52, 74)

52

DISPLAY button (p. 47, 78)

60

Forward skip button (p. 76)

* The buttons on remote control will function the same as those on DVD video camera/recorder.

22

Hitachi DZ-HS301EUK, DZ-HS303EUK, DZ-HS303E, DZ-HS300EUK, DZ-HS301E User Manual

Setups

This section explains preparations for recording – setting up the DVD video camera/recorder and battery.

Demonstration Function

This DVD video camera/recorder is equipped with a demonstration function.

The default at purchase time is “Auto”, which will automatically start the demonstration approx. ten minutes after the DVD video camera/recorder, connected to the AC adapter/charger, is turned on and left unoperated.

Refer to “CHANGING SETTING OF DEMONSTRATION” on page 38 if you wish to view the demonstration immediately or change the setting to “Off”.

English

Setting Up the DVD Video Camera/Recorder

HOLDING DVD VIDEO CAMERA/RECORDER

Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb. Put your hand in a position where you can easily operate the REC button and the Zoom lever. Adjust the length of hand strap so that the DVD video camera/recorder is stable when you press the REC button with your thumb.

ATTACHING SHOULDER STRAP

Be sure to pass through the 2 slots.

Pass the shoulder strap through the shoulder strap attachments.

23

ATTACHING LENS CAP

English

1 Attach the shorter end of lens cap string to

 

 

the lens cap.

2 Attach the longer end of lens cap string to the attachment hole of DVD video camera/ recorder.

3 Push the both sides of cap inward and attach it over the lens.

Note:

Always keep the lens cap on when not using the DVD video camera/recorder, to protect the lens.

When recording, attach the lens cap to the hand strap by hooking the tab inside the cap onto strap for comfortable shooting.

Shorter end

Longer end

Push and fit

INSERTING BATTERY INTO REMOTE CONTROL

Insert the provided lithium battery into remote control.

1 While inserting a fine rod into the hole marked PUSH, pull the battery holder out forward.

2 Insert the lithium battery with the positive R terminal facing down.

3 Slide the cover to close it.

Note:

The life of lithium battery is approximately one year. If the battery is discharged, no operation is possible with remote control: Replace the battery.

Battery holder

24

REMOVING BATTERY FROM REMOTE CONTROL

1 While pushing the battery holder, slide the battery out.

English

Warning:

KEEP THE BATTERY AWAY FROM CHILDREN AND PETS.

IF SWALLOWED, CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.

BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE.

Note:

Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba CR2032, or Duracell DL2032. Use of another battery may present a risk of fire or explosion.

Dispose of battery safely in accordance with local laws. Do not dispose of in fire.

Do not short circuit the battery.

Do not hold the battery with the metallic tweezers.

Keep the battery in a dark, cool, dry place.

The remote control (DZ-RM4W) and lithium battery (CR2032) are supplied only with the DZ-HS303E/ HS301E.

Using remote Control

Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote controllable distance is up to 5 m.

Note:

When using the remote control, make sure that the infrared receiver on DVD video camera/recorder is not exposed to direct sunlight or any intense light. If the infrared receiver is subject to light stronger than the infrared light from remote control, the DVD video camera/recorder cannot be operated by remote control.

If there is an obstacle between the remote control and infrared receiver on DVD video camera/recorder, remote control may not be possible.

The DVD video camera/recorder uses the “VCR2” remote control code of Hitachi VCRs. If you use a Hitachi VCR, etc. with remote control code set to “VCR2”, a VCR placed near the DVD video camera/ recorder will also be operated by the remote control: To prevent this, change the remote control code of the VCR.

25

English

HDD/DVD/Cards

The following table lists the storage media (discs and cards) that can be used on this DVD video camera/recorder and the functions which are available with them:

 

 

 

 

Media

 

 

 

Function

 

DVD-

DVD-RW

DVD-RW

 

 

SD

 

HDD

(VR

(VF

DVD-R

+RW

memory

 

RAM

 

 

mode)

mode)

 

 

card

 

 

 

 

 

To record video (p. 44)

 

 

 

 

 

 

 

 

To record photo (p. 45)

 

 

 

 

 

 

 

 

To delete image just

recorded (p. 74)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To select image and delete it

(p. 85)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To edit image (p. 86 – 87)

 

 

 

 

 

 

 

 

To play on other DVD players

*1

*1*2

*2

*2

*1*2

*3

and DVD recorders (p. 108)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To use new disc or new card

*4

*4

without formatting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To initialise and reuse

(p. 105)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To additionally record on

*5

*5

finalised disc (p. 109)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To edit copied video on PC

*6

*6

*6*7

*6*7

*6*7

*6*7*8

(p. 116)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To playback video on PC

*6

*6

*6*7

*6*7

*6*7

*6*7*8

(p. 116)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● : Functions available; —: Not available

*1: Playable on devices that conform to either 8 cm DVD-RAM, 8 cm DVD-RW (VR mode) or 8cm +RW. *2: Must be finalised. Cannot be played on some DVD players or DVD recorders.

*3: Some DVD devices conform to SD memory card.

*4: When media that are sold “formatted” are used. If the initialisation format differs, the media can be initialised on this DVD video camera/recorder and then used.

*5: To additionally record, the finalised disc must be unfinalised. *6: The provided software is used.

*7: Finalise the disc when editing/playing back on PC.

*8: The software for Macintosh provided with this DVD video camera/recorder is not compatible with a +RW.

26

HDD, Discs

HDD, and usable discs and marks (logos)

Function

 

 

Allows extensive recording (approx. 3 hours in FINE

HDD

 

mode).

 

Allows you to delete unnecessary scenes or edit

 

 

 

 

scenes.

 

 

 

 

 

Allows you to delete unnecessary scenes or edit

DVD-RAM Ver. 2.1 (8 cm)

 

scenes.

 

 

 

 

 

 

 

Allows you to choose the VR mode for deleting

DVD-RW

 

unnecessary scenes or editing scenes, or the VF

[Ver1.1 (8 cm) 2x speed (2x/1x)]

 

mode in which deletion or editing is not possible, but

 

 

high compatibility with DVD players is provided *1.

DVD-R

 

Provides high compatibility with DVD players *1. No

 

deletion or editing is possible.

[for General Ver. 2.0 (8 cm)]

 

 

 

 

 

 

 

 

Provides high compatibility with DVD players but does

+RW Ver. 1.2 (8 cm)

 

not need to be finalised *2. Scenes can be deleted

 

 

immediately after being recorded.

 

 

 

*1: Playback on all DVD players is not guaranteed. The disc must be finalised before being played back on a DVD player.

*2: Playback on all DVD players is not guaranteed.

Note:

This DVD video camera/recorder can use only the 8-cm bare discs not packed in a square cartridge, square caddy case or round DVD holder. The discs in a square cartridge, square caddy case or round DVD holder can be used if they are removed from the package, but take great care not to dirty or scratch the bare disc.

It is recommended that you use Hitachi Maxell HG type single-sided discs, since their compatibility with this DVD video camera/recorder has been confirmed. When using an HG type double-sided disc, take great care with handling it. Using a disc other than these discs may not allow the DVD video camera/recorder to deliver optimum performance.

INFORMATION ON DVD-R

For optimum recording on DVD-R, this DVD video camera/recorder writes control data to the disc in order to automatically make adjustments when it is inserted and ejected accompanying recording. If the disc has no area to be written for adjustment, recording may not be possible. To prevent this, do not insert or eject a DVD-R accompanying recording more than 100 times.

This DVD video camera/recorder cannot record a DVD-R in the VR mode.

NOTES ON FINALISATION:

Do not insert a DVD-RW/DVD-R/+RW recorded or dubbed on this DVD video camera/recorder but not finalised, into a recordable device, such as a DVD recorder: The recorded data may be damaged.

Use only DZ-HS303E/HS301E/HS300E to record/dub or finalise a DVD-RW (VF-mode)/DVD-R/ +RW recorded or dubbed on this DVD video camera/recorder but not finalised: Using any other device could damage the data recorded on the disc.

DVD-RW/DVD-R/+RW edited and finalised on PC or those finalised on another DVD recorder may not be playable on this DVD video camera/recorder, depending on the editing software used or recorded status of DVD-RW/DVD-R/+RW.

If you insert a DVD-R recorded on a DVD video camera/recorder other than DZ-HS303E/HS301E/ HS300E and not finalised, the Disc Navigation screen will automatically start, and no recording can be done on the disc nor can it be finalised.

Do not insert a DVD-RW/DVD-R that was recorded by a DVD recorder manufactured by a company other than Hitachi, and which has not been finalised, in this DVD video camera/recorder: Doing so will make the disc unusable.

English

27

English

EXAMPLES OF DISCS THAT CANNOT BE USED ON THIS DVD VIDEO CAMERA/RECORDER:

CD

DVD-R DL (Dual Layer)

CD-R

DVD-RW DL (Dual Layer)

CD-RW

+R DL (Double Layer)

CD-ROM

+RW DL (Double Layer)

DVD-ROM

+R

DVD-Video

Discs other than those with diameter of 8 cm

DVD-R (4.7 GB) for Authoring Ver. 2.0

 

AVAILABLE CARDS

SD memory cards can be used on this DVD video camera/recorder (incompatible with 2 GB). When using an exclusive adapter, a miniSD memory card can be used in the same way as an SD memory card. No SDHC card or multimedia card can be used.

Handling card

Do not use cards other than the designated ones.

Be sure to perform trial recording before recording vital images.

Do not touch the card terminal or allow it to touch

metal.

Terminal

Do not paste anything other

than exclusive label on label pasting portion.

Do not subject card to impact, bend or drop it.

Do not disassemble card or modify it.

Do not expose card to water.

Do not use or store card in the following places:

Where the temperature is high, such as in vehicle at high temperatures, under burning sun or near a heater

Where humidity is high, or in dusty place

When the erasure prevention switch is locked, no recording, deletion or editing will be possible on the card: Only playback will be possible.

CAUTIONS FOR DISC AND CARD

It is recommended that you create a backup file for valuable data on hard disk of PC.

Do not do the following, or the data on disc or card may be damaged or lost:

Do not remove the disc or card or turn DVD video camera/recorder off during reading or writing of data

Do not use DVD video camera/recorder in a place subject to static electricity or electrical noise

Do not have printing done at a print lab or DPE service

Do not leave a +RW unused in the DVD video camera/recorder for a long time

Note:

This DVD video camera/recorder can play back image data recorded on other digital cameras conforming to the DCF (Design rule for Camera File system) standard. The range of image data playable on this DVD video camera/recorder is that with pixels from 80 horizontal × 60 vertical to 4000 horizontal × 3000 vertical.

DCF is an integrated image file format of digital cameras: Image files can be used on all digital devices conforming to DCF.

Image data edited on PC and certain types of image data may not be visible on this DVD video camera/ recorder.

The image data recorded on another device may not be playable on this DVD video camera/recorder.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Erasure prevention

 

Locked status

switch

 

 

28

Preparations for Power Supply

USING DVD VIDEO CAMERA/RECORDER WITH AC ADAPTER/CHARGER

It is recommended that you use the AC adapter/charger to power the DVD video camera/recorder from household AC outlet when you perform settings on it, play back or edit images, or use it indoors.

Note:

Be sure to use the specified AC adapter/charger (DZ-ACS3 (E)) to power the DVD video camera/recorder. Using other AC adapter/chargers could cause electric shock or result in fire.

Mains lead

1

 

2

 

 

4

 

 

 

3

AC adapter/charger

 

 

 

 

DC power cord

To AC outlet

*The shape of plug varies depending on the model.

1 Connect the mains lead to AC adapter/ charger.

2 Plug the mains lead into AC outlet.

3 Plug one end of DC power cord into the DC output jack on AC adapter/charger.

4 Attach the other end of DC power cord to the battery attachment platform on DVD video camera/recorder.

Use the same procedure as that for battery when attaching and detaching the DC power cord: See page 31.

English

29

English

Setting Up the Battery

The DZ-BP14S battery provided with DZ-HS303E or DZ-BP07PW battery provided with DZ-HS301E/ HS300E has not been charged at purchase time: Charge it before using the DVD video camera/ recorder.

Note:

Be sure to use the DZ-BP14S, DZ-BP07PW (unavailable for DZ-HS303E), DZ-BP14SW (optional) or DZ-BP7SW (optional, unavailable for DZ-HS303E) battery for the DVD video camera/recorder: Using other batteries could cause the DVD video camera/recorder to malfunction, or result in fire.

Be sure to use the DZ-ACS3 (E) AC adapter/charger to charge the battery: Using other chargers could cause electric shock or fire.

Charge the battery at temperatures of 10 – 30ºC.

If the CHARGE indicator does not light when the AC adapter/charger is plugged into AC outlet, unplug it from the AC outlet, wait a few moments, and then plug it into the AC outlet again. If the CHARGE indicator still does not light, the AC adapter/charger may be faulty. Unplug it from the AC outlet and consult your dealer.

The AC adapter/charger can be used around the world. An AC plug adapter is required in some foreign countries. If you need one, purchase it from your local electronics distributor.

CHARGING BATTERY

Use the provided AC adapter/charger to charge the battery.

1 Connect the mains lead to AC adapter/

3 Attach the battery to AC adapter/charger.

charger.

 

2 Plug the mains lead into AC outlet.

Note:

When charging a battery, unplug the DC power cord

 

from the DC output jack on AC adapter/charger.

 

Battery

 

Mains lead

CHARGE indicator

AC adapter/charger

To AC outlet

* The shape of plug DC output terminal varies depending

on the model.

30

Loading...
+ 131 hidden pages