Heat & Glo LifeStyle 4035-822 User Manual

Size:
2.73 Mb
Download

Owner’s Manual

Installation and Operation

Models:

TiaraE

Electric Stove

CAUTION

DO NOT DISCARD THIS MANUAL

• Important operating •

Read, understand

• Leave this manual

and maintenance

and follow these

party responsible

instructions included.

instructions for safe

use and operation.

 

installation and

 

 

operation.

 

WARNING

DDO ISCN O A T R D

HOT! DO NOT TOUCH.

SEVERE BURNS MAY RESULT.

CLOTHING IGNITION MAY RESULT.

Glass and other surfaces are hot during operation and cool down.

Keep children away.

CAREFULLY SUPERVISE children in same room as fireplace.

Alert children and adults to hazards of high temperatures.

Keep clothing, furniture, draperies and other combustibles away.

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

1

Read this manual before installing or operating this stove. Please retain this owner’s manual for future reference.

Congratulations!

Congratulations on selecting a Heat & Glo electric stove. The Heat & Glo stove you have selected is designed to provide the utmost in safety, reliability and efficiency.

As the owner of a new electric stove, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future reference. We suggest you keep it with your other important documents and product manuals.

Your new Heat & Glo electric stove will give you years of durable use and trouble-freeenjoyment. Welcome to the Heat & Glo family of electric products!

 

Homeowner Reference Information

We recommend that you record the following pertinent

 

 

 

 

 

 

 

information about your fireplace:

 

 

Model Name:

 

 

Date purchased/installed:

 

 

 

Serial Number:

 

 

Location on fireplace:

 

 

 

Dealership purchased from:

 

 

Dealer phone:

 

 

 

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listing Label Information/Location

The model information regarding your specific fireplace can be found on the rating plate located on the bottom of the front viewing area behind casting.

Fireplace

 

 

 

 

Unit

Model

 

 

 

 

 

 

 

 

Serial

 

 

 

 

 

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TE

 

 

 

 

 

**

 

 

 

 

 

 

 

TIARAE 4035-840

 

ES000001

 

 

 

 

 

 

 

 

 

 

Firebox

Serial

Number

2

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

Table of Contents

1Listing and Code Approvals

A. Appliance Certification. . . . . . . . . . . . . . . . . . . . . . . . .4

2Getting Started

A. Important Instructions . . . . . . . . . . . . . . . . . . . . . . . . .5

B. Tools and Supplies Needed. . . . . . . . . . . . . . . . . . . . .5

C. Inspect Stove and Components . . . . . . . . . . . . . . . . .5

3Location and Clearances

A. Selecting Stove Location. . . . . . . . . . . . . . . . . . . . . . .6

B. Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

4Electric Stove Set Up

A. Leg Leveling System. . . . . . . . . . . . . . . . . . . . . . . . . .7

5Operating Instructions

A. Main Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . .8

B. Intensity Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

C. Heater Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

D. Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

6Troubleshooting

7Maintenance and Servicing the Fireplace

A. Cleaning Firebox and Control Compartment. . . . . . .10

B. Cleaning Glass Doors and Back Glass . . . . . . . . . . .10

C. Replacing the Light Bulbs . . . . . . . . . . . . . . . . . . . . . 11

8Reference Materials

A. TiaraE Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . .12

B. Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

C. Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

D. Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

E. Contact Information. . . . . . . . . . . . . . . . . . . . . . . . . .17

Note: An arrow () found in the text signifies change in content.

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

3

1 Listing and Code Approvals

A. Appliance Certification

 

 

 

 

 

 

 

 

 

WARNING

This stove has been tested and listed in accordance with

UL 2021 Standards for fixed andlocation-dedicatedelectric

Fire Risk

room heaters in the United States, the current CSA C22.2

Shock Risk

NO. 46 in Canada, and has been listed by Underwriters’

Laboratoreis Inc. for installation as described in this manual.

Hearth & Home Technologies disclaims any

All components are UL or CSA safety certified.

 

 

 

 

responsibility for, and the warranty will be

If you need assistance during isntallation, please contact

voided by, the following actions:

your local dealer or the Heat & Glo Technical Services De-

 

partment, Hearth & Home Technologies Inc., 800 West Jef-

• Installation and use of any damaged appliance.

ferson, Lake City, MN 55041, 1-888-427-3973.

 

 

• Modification of the appliance.

 

 

 

 

 

 

 

 

• Installation other than as instructed by Hearth & Home

 

 

 

 

 

 

 

 

Technologies.

 

 

 

 

 

 

 

 

• Installation and/or use of any component part not

 

 

 

 

 

 

 

 

approved by Hearth & Home Technologies.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model #

Description

 

Voltage

Watts

Amps

 

 

 

TiaraE

Electric

 

120

1500

12.5

 

 

 

Stove

 

 

 

 

 

 

 

 

 

 

 

4

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

2 Getting Started

A. Important Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

Read all instructions before using this heater.

This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 ft (.9m) from the front of the heater and keep them away from the sides and rear.

Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.

Always unplug heater when not in use.

Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.

Do not use outdoors.

This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.

Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area and where it will not be tripped over.

To disconnect heater, turn controls to off, then remove plug from outlet.

Donotinsertorallowforeignobjectstoenteranyventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

To prevent a possible fire, do not block air intakes or exhaust in any manner.

A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

Use this heater only as described in this manual.Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No. 16 AWG minimum size and rated not less than 1875 watts.

Always use properly grounded fused and polarized outlets.

Always use ground fault protection where required by electrical code.

Always disconnect power before performing any cleaning, maintenance or relocation of the appliance.

To prevent a possible fire, do not burn wood or other materials in this appliance.

To prevent personal injury, do not strike appliance glass.

To prevent electric shock or fire, always use a certified electrician should new circuits or outlets be required.

When transporting or storing the heater, keep in a dry place free from excessive vibration and store as to avoid damage.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

B. Electric Service

All wiring must be installed by a qualified electrician. Use appropriate wire to meet local and national codes for rated power consumption.

The heater is wired from the factory with a polarized plug. No provisions have been made for hard wiring.

For ease of electrical hook up, you may wish to install the heater near an existing outlet.A15 amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit trips or fuse blows on a regular basis when the heater is operated. Additional appliances on the same circuit may exceed the current rating of the circuit breaker.

Before plugging the heater into the wall outlet, make sure the control switch is in the “OFF” position.

If the cord does not reach the outlet, a No. 16-AWGminimum wire size extension cord rated for a minimum of 1875 watts may be used.

C. Inspect Stove and Components

WARNING

Inspect appliance and components for damage. Damaged parts may impair safe operation.

Do NOT install damaged components.

Do NOT install incomplete components.

Do NOT install substitute components.

Report damaged parts to dealer.

Carefully remove the stove and components from the packaging.

Report to your dealer any parts damaged in shipment.

Readalltheinstructionsbeforestartingtheinstallation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

5

3

Location and Clearances

 

 

 

 

 

 

 

 

 

 

 

 

WARNING

 

DANGER

 

 

Fire Risk!

 

Electrocution Risk!

 

 

Due to high temperature, this appliance

 

• NEVER locate this stove where it may fall

 

 

should be located out of high traffic areas.

 

into a bathtub or other water container.

 

 

• Keep combustible materials such as

 

 

 

 

 

 

 

 

furniture, pillows, bedding, papers,

 

 

 

 

clothes and curtains at least 3 ft (.9 m)

 

 

 

 

WARNING

 

 

from the front of the appliance.

 

 

 

 

 

Fire Risk

 

A. Selecting Stove Location

High Temperatures

 

Figure 3.1 illustrates a variety of ways the appliance may be

Keep combustible household items away

 

from appliance.

 

located in a room. The stove may be installed directly on the

 

Do NOT obstruct combustion and ventilation

 

floor or raised on a hearth.

 

air.

 

 

 

 

 

 

 

 

• Do NOT place combustible items on top

 

B. Clearances

of or in front of appliance.

 

Figure 3.1 also shows all clearances that must be main-

• Keep furniture, draperies away from

 

appliance.

 

tained around the stove.

 

 

 

1 in. [26mm]

1 in. [26mm]

1 in.

1 in.

[26 mm]

[26 mm]

2 in. [51mm]

Minimum Clearances

from the Stove to Combustible Materials

Glass Front

36 in.

(914 mm)

Floor

0 in.

(0 mm)

Rear

2 in.

(51 mm)

Sides

1 in.

(26 mm)

Floor to Ceiling

30 in.

(762 mm)

1 in. (26mm) - minimum clearance from the corners and sides of the stove or warming shelves.

2 in. (51mm) - minimum clearance from the back of the appliance.

Figure 3.1 Appliance Locations

Note: Minimum clearances must be maintained at all times. Illustrations throughout these instructions reflect typical installations and are for design purposes only. Actual installation may vary slightly due to individual design preferences.

The illustrations and diagrams used throughout these installation isntructions are not drawn to scale.

6

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

4

Electric Stove Set Up

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION

 

WARNING

 

 

Sharp Edges

 

Shock Risk

 

 

• Wear protective gloves and safety glasses

 

Improperly grounded outlets could cause

 

 

during installation.

 

electrical shock.

 

 

 

 

• Always use properly grounded, fused and

 

 

 

 

polarized outlets.

 

 

 

 

• Always use ground fault protection where

 

 

 

 

A. Leg Leveling System

 

required by electrical code.

 

 

 

 

Thread allen bolts through nuts until flush. See

Figure 4.1

B. Plug into Outlet

• Slide assembled nuts and bolts into the slot on the legs

with the nuts on the bottom. Use a 5/32 in. (3.96 mm)

 

Allen wrench to adjust legs to the desired level. See

 

Figure 4.2.

 

Note: Two allen bolts and two nuts are included in the component bag.

Figure 4.1 Leveling Legs Components

Figure 4.2 Assembled Leveling Legs

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

7

5 Operating Instructions

The operating controls are located on the back of the appliance.

A. Main Power Switch

When the main power switch is turned on, it provides power to all functions.

When used in conjunction with RC-ELEC-HNGthe switch should remain in the “ON” position.

B. Intensity Switch

Controls the intensity of the ember bed and flame.

C. Heater Switch

The heater switch provides power to the heater system.

The RC-ELEC-HNGremote control does not control this function.

D. Thermostat

The thermostat allows you to adjust to the desired room temperature.

To adjust the thermostat, turn the control knob clockwise all the way, then turn the knob counterclockwise until you hear a click.

To increase the desired temperature, turn the knob clockwise.

To decrease the desired temperature, turn the knob counterclockwise.

8

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

6 Troubleshooting

 

Issues

 

Possible Causes

Solutions

1.

Appliance doesn’t turn on

A.

Power switch is “OFF”.

Turn the power switch to the “ON” position.

 

with the main switch or

 

 

 

 

B.

Circuit breaker is tripped.

May need to put the appliance on a dedicated service or reduce the

 

remote transmitter.

 

 

 

number of appliances on the circuit.

 

 

 

 

 

 

 

 

 

 

 

C.

Appliance is unplugged

Plug the cord into an outlet.

 

 

 

from wall outlet.

 

 

 

D.

Loose wiring.

Check all wiring for loose connections.

2.

Appliance is on, but

A.

The bulb(s) is (are)

Replace the bulb(s).

 

no flame or low flame

 

burned out.

 

 

intensity.

 

 

 

 

B.

Loose wiring.

Check all wiring for loose connections.

 

 

3.

Flames are frozen.

A.

Loose wiring.

Check all wiring for loose connections.

 

 

B.

Flame element is not

Reattach the flame element to the motor.

 

 

 

attached to the motor.

 

 

 

C.

Motor is defective.

Replace the motor.

4.

Excessive noise in the

A.

Flame element isn’t

Reinstall the flame element.

 

lower portion of the

 

seated properly.

 

 

appliance.

 

 

 

 

B.

Motor is defective.

Replace the motor.

 

 

5.

Heating system doesn’t

A.

Heating system switch is

Turn the heating system switch to the “ON” position.

 

come on.

 

“OFF”.

 

 

 

B.

Thermostat is set too low.

Turn the thermostat knob clockwise until you hear a “click”.

 

 

 

 

 

 

 

C.

Heating system is

The heating system is protected by a thermal cutout switch. Shut off all

 

 

 

overheated.

switches. Wait five minutes, then turn the heater on.

 

 

D.

Loose wiring.

Check all wiring for loose connections.

6.

Fan runs but no heat is

A.

Loose wiring.

Check all wiring for loose connections.

 

put out.

 

 

 

 

B.

Bad heating element.

Replace the heating system.

 

 

7.

Heating element is on but

A.

Loose wiring.

Check all wiring for loose connections.

 

fan doesn’t run.

 

 

 

 

B.

Fan is defective.

Replace the heating system.

 

 

8.

The heater doesn’t turn

A.

Thermostat is set too

Turn the thermostat knob clockwise until you hear a “click”.

 

off.

 

high.

 

9.

Excessive noise in upper

A.

Build up of dirt on the

Clean all fans.

 

portion of the heater.

 

fans.

 

 

 

B.

Heater fan is defective.

Replace the heating system.

10.

Remote control doesn’t

A.

Remote is out of range.

Move remote closer to the heater.

 

work.

 

 

 

 

B.

Low batteries.

Replace the batteries.

 

 

11.

Odor

A.

The heater may emit a

 

 

 

 

slight, harmless odor

 

 

 

 

when first used. This is a

 

 

 

 

normal condition caused

 

 

 

 

by initial heating of the

 

 

 

 

internal parts and will not

 

 

 

 

occur again.

 

 

 

 

 

 

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

9

7 Maintenance and Servicing the Fireplace

WARNING

Shock Risk

Burn Risk

Cleaning, performing maintenance or moving this electric stove without disconnecting power and allowing the stove to cool could create a shock or burn hazard.

Turn controls to “OFF”.

Remove plug from outlet or turn off the circuit breaker to the stove.

A. Cleaning Firebox and Control Compartment

Turn the appliance off and disconnect the power cord from the outlet.

Allow the appliance to cool before cleaning.

Remove the top of the appliance by grasping the top on both sides and lifting up.

Remove the heater system. See Figure 7.1. Rest it on top of the appliance so it does not fall.

Remove the firebox top to access the log area.

Replace all parts after cleaning has been completed.

Plug in power cord.

B. Cleaning Glass Doors and Back Glass

The glass is cleaned in the factory during the assembly process. During shipment, installation, handling, etc. the glass surface may collect dust particles. These can be removed by buffing lightly with a clean dry cloth.

To remove fingerprints or other marks, the glass can be cleaned with a damp cloth using a good quality household glass cleaner. The glass should be completely dried with a lint free cloth or paper towel.

In the event of glass breakage, vacuum all remaining glass pieces with a shop vac. DO NOT VACUUM IF PIECES ARE HOT! Replace glass with only a glass panel ordered direct or through your local distributor. Never use substitute material. Only fully tempered soda lime safety glass may be used on this appliance.

Figure 7.1 Remove the Heater System

10

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

C. Replacing the Light Bulbs

CAUTION

Burn Risk

Light bulbs are hot during operation of the stove.

Allow bulbs to cool at least five minutes before touching them.

The light bulbs need to be replaced when the flame and/or ember bed is dark on one side. Replace the bulbs with 75 watt halogen bulbs with mini-candelabra base. Do not exceed 75 watts per bulb. Light bulbs can be purchased at a local hardware or lighting store, online or by phone. To order online, log ontowww.lite-house.com or call1-800-838-0977.We recommend you use Sylvania model 75Q/CL/MC/RP or Satco® model S3157.

Turn off the circuit breaker or unplug the stove before replacing the light bulbs.

Light bulb access is on the bottom front of the stove.

Locate and remove the three screws. See Figures 7.2 and 7.3.

Lower the cover plate to access the light bulbs.

Carefully remove the burned out bulb from the light socket. Place the new bulb in the socket. Follow directions on the light bulb package for handling requirements.

Reinstall the cover plate. Make sure all wires are back inside the stove.

Reinstall the three screws removed earlier.

Plug the stove’s power cord into the electrical outlet and turn the switch to “ON”.

CAUTION

Handle glass assembly with care.

When cleaning glass door:

Avoid striking, scratching or slamming glass.

Do NOT use abrasive cleaners.

Do NOT clean glass when it is hot.

Remove these three screws.

(front)

Do not remove

Bulb Access Plate

these four screws.

 

(Bottom of stove.)

(back)

Figure 7.2 Screws on Bulb Access Plate

BulbsSockets

Figure 7.3 Replacing the Bulbs

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

11

8 Reference Materials

A. TiaraE Dimensions

18-1/2in.(470 mm)

35-1/2in. (902 mm)

(with optional decorative shelves)

23-1/2in.(591 mm)

(without optional decorative shelves)

27 in.

(686 mm)

18-1/2in.(470 mm)

12

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

B. Wiring Diagram

MAIN

POWER

 

ORG

M ORG

 

 

 

WHT

 

BLK

 

DIMMER

 

 

 

 

 

SWITCH

BLK

L

WHT

WHT

 

 

 

BLK

 

 

 

 

 

 

 

 

 

 

 

 

BLK

BLK

BLK

BLK

 

 

 

 

BLK BLK L WHT

 

 

 

 

 

 

 

 

HEATER

 

 

 

 

 

 

 

 

SWITCH

 

 

 

 

 

WHT

 

 

 

 

 

 

 

 

THERMOSTAT

BLK

 

BLK

FAN

BLK

 

M

 

BLK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BLU

 

 

WHT

 

 

 

BLK

 

 

 

 

 

HEATER SYSTEM

If any of the original wire as supplied with the appliance must be replaced, it must be replaced with an equivalent wire gauge and 105 degree rated wire.

All wiring is to be done by a qualified electrician.

PLUG

! CAUTION!

Risk of electrical shock! Disconnect electric power before servicing.

CAUTION

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

13

C. Service Parts

Service Parts

TIARA

Exploded Parts Diagram

Beginning Manufacturing Date: N/A

TIARAE

Ending Manufacturing Date: Active

1

2

11

8

10

36

14

3

40

41

7

4

12

38

5

637

23

15

 

20

 

 

25

 

 

 

34

22

 

 

26

 

32

28

19

24

39

33

 

 

30

 

29

 

 

3

42 40

43

3116

21

35

27

17

44

13

9

14

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

 

 

Service Parts

 

TIARA

 

 

 

 

 

 

 

 

Service Parts List

Beginning Manufacturing Date: N/A

 

 

 

Ending Manufacturing Date: Active

 

 

 

 

#

Description of Part

TIARAE

Qty.

 

1

Grille Casting

** Specify Color

1

 

2

Top Casting

** Specify Color

1

 

3

Side Casting

** Specify Color

2

 

4

Front Casting

** Specify Color

1

 

5

Left Door Casting

** Specify Color

1

 

6

Right Door Casting Assembly

** Specify Color

1

 

7

Front Glass

4035-819

1

 

8

Heater Assembly

4035-102

1

 

9

Socket Assembly

4035-101

1

 

10

Box Top

4035-034

1

 

11

Air Channel

4035-044

2

 

12

Retainer

4035-311

4

 

13

Halogen Bulb

33961

2

 

14

Back Glass

4035-805

1

 

15

Flame Panel

4035-035

1

 

16

Split Bushing

13585

3

 

17

Box Bottom

4035-033

1

 

19

Two Prong Power Cord

4030-802

1

 

20

Rocker Switch

12652

2

 

21

Motor

4035-810

1

 

22

(Thermostat) Knob

4035-826

1

 

23

Element Bracket

4035-038

2

 

24

Heater Switch Label

4035-825

1

 

25

Power Switch Label

4035-824

1

 

26

Strain Relief Bushing

4030-873

1

 

27

Bottom Light Shield

4035-043

1

 

28

Variable Control

4035-809

1

 

29

Snap-inCord Clip

25611

2

 

30

Bi-metalThermostat

4035-808

1

 

32

3x10mm PH PN ZC Machine Screw

4021-040

2

 

33

Box Back

4035-032

1

 

34

Knob

19942

1

 

35

#5x5/16 PPH SM Screw Type AB Zinc

4030-838

2

 

36

Lens

4035-816

1

 

37

Flame Element Kit

4030-200

1

 

38

Grommet

25600

1

 

39

Upper Casting Support

4035-020

4

 

40

Lower Casting Support

4035-019

2

 

41

Ember Bed

4035-806

1

 

42

Hearth Pan

4035-030

1

 

43

Light Shield

4035-040

1

 

44

Outer Bottom Light Shield

4035-046

1

 

 

Cast Reinformcement Bracket

4035-055

2

 

 

Log Assembly

4035-103

1

 

 

** Contact your local distributor / dealer to order Casting parts

 

 

 

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

15

D. Optional Components

RC-ELECT-HNGRemote Control

16

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

E. Limited Warranty

WARRANTY

Hearth & Home Technologies Inc. (HHT) Electric Fireplaces are tested and inspected prior to shipment and are guaranteed from defect to the purchaser of each new product. Any part which proves to be defective in material or workmanship under normal use within one year will be repaired or replaced without charge.* The Company will not be responsible for any expense incurred for installation, removal from service, or transportation costs. Any such defect should be brought to the attention of the Dealer where the product was purchased and is authorized to repair or replace within the terms of this warranty.

The Company’s only obligation under this warranty will be at its sole option to repair or replace any part proving defective or to refund the purchase price thereof.

The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out of the use of or inability to use the product.

The warranty will not apply if, in the sole judgement of the Company, damage or failure has resulted from accident, alteration, misuse, abuse, incorrect installation, or operation on an incorrect power source.

The foregoing is in lieu of all other warranties expressed, implied, or statutory, and the Company neither assumes, nor authorizes any person to assume for it any other obligation, or liability in connection with said product.

*Light bulbs are not covered in the warranty.

How to Obtain Service

To obtain service under this warranty you must:

1.Send written notice of the claimed condition to Heat & Glo Technical Service Department, Hearth & Home Technologies Inc., 800 W. Jefferson, Lake City, MN 55041.

2.Provide proof of purchase, model number, serial number, and manufacturing date code to HHT.

3.Provide HHT reasonable opportunity to investigate the claim, including reasonable opportunity to inspect the Appliance prior to any repair or replacement work and before the Appliance or any component of the Appliance has been removed from the place of original installation.

4.Obtain HHT’s consent to any warranty work before the work is done.

ADDITIONAL INFORMATION: If you would like information on current Heat & Glo products or want to locate a dealer in your area, call1-888-427-3973.

©2003 Heat & Glo® is a Registered Trademark of Hearth & Home Technologies Inc.

Heat & Glo • TiaraE• 4035-822Rev F • 01/05

17

F. Contact Information

Hearth & Home Technologies Inc.

800 W. Jefferson

Lake City, MN 55041

Please contact your Heatilator dealer with any questions or concerns. For the number of your nearest Heat & Glo dealer, please call 1-888-427-3973.

– NOTES –

CAUTION

DO NOT DISCARD THIS MANUAL

• Important operating •

Read, understand

• Leave this manual

and maintenance

and follow these

party responsible

instructions included.

instructions for safe

use and operation.

 

installation and

 

 

operation.

 

DO

DI

NO

 

SCA T

 

RD

This product may be covered by one or more of the following patents: (United States) 4593510, 4686807, 4766876, 4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495, 5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 5947112, 5996575, 6006743, 6019099, 6048195, 6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2, 6729551, 6736133, 6748940, 6748942, D320652, D445174, D462436; (Canada)1297749, 2195264, 2225408; or other U.S. and foreign patents pending.

18

Heat & Glo • TiaraE• 4035-822Rev F • 01/05