12 VOLT RECHARGEABLE
GREASE GUN
Model 92196
OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2004 by Harbor Freight Tools® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
For technical questions, or replacement parts, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Item |
Description |
Electrical Requirements |
Charger Input Power: 120VAC / 60 Hz |
|
Battery Output Power: 12VDC |
|
Battery Capacity: 1300 MAH |
|
Battery Charge Time: 1 Hour Quick Charge |
Maximum Operating Pressure |
6500 PSI |
Grease Reservoir Capacity |
14.5 Ounces |
Hose Size |
30-1/2” Long x 0.386” Diameter |
Tube Dimensions |
10-3/4” Long x 2.20” Diameter |
Housing Dimensions |
7” L x 3” W x 1-1/2” H |
Handle Dimensions |
7-1/2” L x 3” W (Overall) |
Trigger |
Squeeze Type |
LED Function Button |
“ON” / “OFF” |
Weight |
12.10 Pounds |
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
SKU 92196 |
For technical questions, please call 1-800-444-3353 |
PAGE 2 |
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
1.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
2.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
PERSONAL SAFETY
1.Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3.Avoid accidental starting. Be sure the Switch (18) is released before plugging in. Carrying power tools with your finger on the Trigger, or plugging in power tools with the Trigger depressed, invites accidents.
4.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.
5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.
6.Use safety equipment. Always wear ANSI approved safety glasses underneath a full face safety shield. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
SKU 92196 |
For technical questions, please call 1-800-444-3353 |
PAGE 3 |
TOOL USE AND CARE
1.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
2.Do not use the power tool if the Switch (18) does not turn it on or off.
Any tool that cannot be controlled with the Switch is dangerous and must be replaced.
3.Disconnect the power tool from its Battery Pack (3) before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
4.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
5.Maintain tools with care. Properly maintained tools are less likely to malfunction and are easier to control. Do not use a damaged tool. Tag damaged tools
“Do not use” until repaired.
6.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
7.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
SERVICE
1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
2.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of
SKU 92196 |
For technical questions, please call 1-800-444-3353 |
PAGE 4 |
Loading...