69243
Self-leveling Laser Level
Item 69243
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
Copyright© 2011 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Save This Manual
Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual near
the assembly diagram (or month and year of purchase
if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
IMPORTANT SAFETY
INFORMATION
2. Do not direct the laser beam into
the eyes of any person or animal.
Doing so may cause severe eye injury or death.
3. Verify Laser Level is in the “Off” position before
making any adjustments or changing the batteries.
4. Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.
5. Remove batteries if Laser Level is not to
be used for a long period of time.
6. The Laser Level is a delicate instrument;
do not drop or jar the Laser Level.
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol. It is
used to alert you to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert symbol, is used
to address practices not related to personal injury.
General Safety Warnings
7. Keep work area clean and well lit.
8. This product is not a toy.
Keep it out of reach of children.
9. Keep children and bystanders away
while operating Laser Level.
10. Inspect before every use; do not use
if parts loose or damaged.
11. Stay alert, watch what you are doing and use
common sense when operating Laser Level.
Do not use Laser Level while you are tired or under
the inuence of drugs, alcohol or medication.
12. Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts.
13. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
14. WARNING: This product contains or, when
used, produces a chemical known to the
State of California to cause cancer and
birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
15. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
WARNING! Read all safety warnings
and instructions. Save all warnings and
instructions for future reference.
1. Avoid direct eye exposure.
The included laser enhancement glasses are
NOT intended to protect your eyes in any way.
Page 2 For technical questions, please call 1-800-444-3353. SKU 69243
SAVE THESE
INSTRUCTIONS.
Rev 05c, 06b
Specications
To prevent serious injury and blindness:
7. Push the Pendulum Lock to the right to
free the pendulum. See Figure 1.
Laser Range Projects Up to 40 ft.
Max. Tripod Height 48”
Self Leveling Range 6°
Batteries (2) ‘AA’ (included)
WARNING
Do not use included goggles for eye
protection. Read manual before use.
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Max. Output: <5mW,
Wavelength: 650 nm ±10 nm
This product complies with 21 CFR 1040.10 and 1040.11
4F, NO3, Lane 335, Sec 4, Hsin-Yi Rd., Taipen, China
Manufacture Date: ___________, _______
CLASS IIIa LASER PRODUCT
Diode Mfr.: Sean & Stephen Corp.
Assembly
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Pendulum
Lock
Figure 1
8. Turn on the Laser. Allow the laser lines to
stabilize for 4 to 6 seconds before starting
any measuring or leveling tasks.
11k
9. To disassemble and store, move the
pendulum lock to the left (see Figure 1) and
follow the above directions in reverse.
NOTICE: If the pendulum lock is not engaged
before movement, the level may be damaged.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Turn Line Buttons off before adjusting Laser Level.
Note: For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagram near the end of this manual.
1. Remove the tripod from the case.
2. Open tripod’s legs and adjust positioning
of each leg until base is level. Use bubble
level in tripod base as a guide.
3. Remove the Laser Level from the case.
4. Install batteries, making sure to align
batteries according to indicated polarity.
5. Attach the Laser to the tripod base. Do this by
threading the bolt at the top of the tripod through the
holes at the center of the Laser Level’s lower base.
6. Level the Laser by using the tri-brack
adjustment screws until the bubbles
are centered on the two levels.
REV 10k
Page 3For technical questions, please call 1-800-444-3353.SKU 69243
Loading...