Bar Blenders
Models 901/908/909/910/918/919
Operation Manual
Page 2
Mélangeurs pour bar
Modèles 901/908/909/910/918/919
Manuel d’utilisation
Page 10
Licuadoras para bar
Modelos 901/908/909/910/918/919
Manual de uso
Página 18
www.commercial.hamiltonbeach.com
840111500
Blender Safety
IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your operator training program.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER” or “WARNING.” These words mean:
wDANGER
wWARNING
You will be killed or seriously injured if you don’t follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
wWARNING
Electrical Shock Hazard Plug into a grounded outlet.
Do not remove ground. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
wWARNING
Cut Hazard
Always place cover on jar when blending.
Do not put hands, spoons, or other utensils in jar when blending.
Failure to follow these instructions can result in broken bones or cuts.
Requesting Assistance or Service
Before calling for assistance or service, please check the “Troubleshooting Guide” in this manual. If you still need help, follow the instructions below.
Whenever you call to request assistance or service, you need to know the complete model number. You can find this information on the label on the bottom of your blender.
Please also record the purchase date of your equipment and your dealer’s name, address, and telephone number.
Model Number__________________________
Purchase Date__________________________
Dealer Name ___________________________
Dealer Address _________________________
Dealer Phone___________________________
You can also order replacement parts by calling your nearest Hamilton Beach Commercial Service Center or your local dealer.
Call our Technical Service number: 866-285-1087 or 910-692-2223
8 a.m. – 5:30 p.m. EST Monday – Thursday, 8 a.m. – 5:15 p.m. EST Friday (www.commercial.hamiltonbeach.com)
2
Blender Safety
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances, basic safety precautions should be followed, including the following:
• Read all instructions. |
• To prevent damage to blender, jar, or cutter |
|
• Plug into a grounded outlet. |
assembly, DO NOT move or shake blender |
|
• Do not touch surfaces that may be hot. |
while in operation. If blending action stops during |
|
operation, turn blender OFF, remove jar from |
||
Use handles or knobs provided. |
||
base, remove jar cover, and use a thin rubber |
||
• Extreme caution must be used when moving an |
||
spatula to push mixture towards cutters. |
||
appliance containing hot oil or other hot liquids. |
||
• Do not spray the base with a high-pressure |
||
• Do not use appliance for other than intended use. |
||
spray gun. |
||
• To protect against electrical shock, do not |
||
• Disconnect power before cleaning or servicing. |
||
immerse cord, plug, or blender base in water |
||
• To prevent burns from hot liquids splashing out |
||
or any other liquid. |
||
of the jar, always remove the filler cap of the |
||
• Close supervision is necessary when any |
||
container cover before blending hot liquids. |
||
appliance is used by or near children. |
||
• Do not operate any appliance with a damaged |
||
• The use of accessory attachments not recom- |
||
cord or plug or after the appliance malfunctions, |
||
mended by Hamilton Beach may cause injuries. |
||
or is dropped or damaged in any manner. |
||
• To reduce risk of personal injury, unplug cord |
||
Return appliance to the nearest service facility |
||
from outlet when not in use, and before putting on |
for examination, repair, or electrical or |
|
or taking off parts or doing any other servicing of |
mechanical adjustment. |
|
the blender. |
• If the supply cord of this appliance is damaged, |
|
• Do not let cord hang over edge of table or |
||
it must be replaced by the manufacturer or its ser- |
||
counter or touch hot surfaces. |
vice agent or a similar qualified person. If fitted |
|
• Do not place on or near a hot gas or electric |
with a non-rewirable U.K. plug, the 13 amp fuse |
|
burner or in a heated oven. |
approved by ASTA to be B.S. 1362 must be used. |
|
• To reduce risk of personal injury and to prevent |
If you need a replacement fuse carrier, it must be |
|
damage to blender or jar and cutter assembly, |
replaced by the same colour coded carrier with |
|
DO NOT insert utensils into blender jar while |
the same markings. Fuse covers and carriers |
|
operating blender, or store utensils in the blender |
can be obtained from approved service agents. |
|
jar when it is not in use. |
IMPORTANT: If the molded plug is cut off, |
|
• Avoid contacting moving parts. |
dispose of it immediately. The plug is not rewirable |
|
and would cause a shock hazard if inserted into |
||
• Blades are sharp. Handle carefully. |
||
a socket. |
||
• Inspect jar and cutter assembly daily. Check |
||
• For a complete operation manual in this |
||
cutter for wear, nicks, or broken blades. Replace |
||
language, please visit our website at |
||
jar and cutter assembly at least every 12 months. |
||
www.commercial.hamiltonbeach.com |
||
• Do not defeat the jar pad sensors. |
||
or call 910-692-2223. |
•Do not use outdoors.
•This appliance is intended for short periods of operation, with a rated operating time of 3 minutes.
–SAVE THESE INSTRUCTIONS –
Blender Operation – Quick Start Guide
1.Place the blender on a dry, level surface.
2.Make sure the power switch is in the “off” or O position. Plug the blender into a grounded electrical outlet.
3.Place the jar on the base with ingredients and jar lid in place.
4.Set the controls to your preference.
5.Move the power switch to the “on” or I position.
3
Parts and Features
The parts and features for the 901/908/909/910/918/919 Blenders are shown on this page. Become familiar with all parts and features before using your blender.
Your blender is designed for blending and mixing beverages.
Note: The Blender is not designed to crush ice. Ice cubes made in most icemakers may be added to liquid ingredients in the blender to make daiquiris or similar drinks.
Removable |
Cover |
Filler Cap |
Container
Cutter Unit Assembly
Gasket
Blades
Clutch |
|
|
Model 901 |
|
Models |
Base |
On/Off |
|
Switch |
|||
|
|||
908/909 |
Models |
|
|
On/Off |
|
||
Switch |
On/Off/Pulse |
|
|
HIGH/LOW |
|
|
|
Switch |
|
|
Model 901 |
Model 908 |
Model 909 |
Model 910 |
Model 918 |
Model 919 |
4
Operation
Operating the Blender
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Controls
Model 901:
•The ON/OFF switch will turn the blender ON for continuous operation at approximately 18,000 RPM, or OFF.
Models 908, 909, 910, 918, 919:
Two separate switches on the front panel allow you to control the blender for precise blending requirements:
•The ON/OFF switch will turn the blender ON for continuous operation or OFF.
•The HIGH.LOW switch allows you to select the following speeds:
Hi – 17,800 RPM Low – 11,500 RPM
•The Pulse switch (Models 910, 918 and 919) turns on the blender only when the switch is pressed. When the switch is released, the blender will stop. This will allow you to precisely control the operation of the blender.
Using the blender
Before you use the blender for the first time, wash the container, cover, and cutter unit assembly. Refer to “Cleaning the Blender.” Do not put the cutter unit assembly in the dishwasher.
To operate the blender, proceed as follows:
1.Place the blender on a clean, dry, level surface, and set the ON/OFF switch to OFF.
2.Place cutter unit in the threaded collar, blades up. Slip the gasket OVER the blades and onto the base of the cutter unit. Screw the completed blade assembly onto the container.
wWARNING
Cut Hazard
Always place cover on jar when blending.
Do not put hands, spoons or other utensils in jar when blending.
Failure to follow these instructions can result in broken bones or cuts.
HIGH/LOW
Switch
ON/OFF
Switch
Model 901 |
Models 908/909 |
||
3. Plug the |
|
|
|
electric |
|
|
|
4. Place the |
ON/OFF/ |
|
|
blended |
|
||
Pulse |
HIGH/LOW |
||
5. Place the |
|||
Switch |
|||
the base. |
|
Switch |
|
|
|
rests securely
6. Place the
cap on the
7. Set the Hi/Low switch (except model 901) to the
desired speed. See “Professional Blending Techniques” for blending tips.
NOTE: If you want the blender to run for short bursts, press the Pulse switch (on some models). While you are pressing the Pulse switch, the blender will run at the selected speed. Release the Pulse switch to stop the blender.
5
Operating the Blender
Professional Blending Techniques
Filling the container
When filling the container with ingredients, follow these recommendations:
•Use sufficient amount of liquid to ensure that the mixture is fluid and free-running at all times. Pour the liquid into the container FIRST.
•Cut solid ingredients into pieces that are no bigger than a 1″(2.5cm)cube.
•Add the ingredients to container in batches. Do not blend maximum volume all at once.
•Do NOT overfill the container with product. This may prevent the blender from processing the product properly. Process dense foods or thick mixtures in small batches, and remember that the volume of the product normally increases during processing.
wWARNING
Burn Hazard
Always use caution when blending hot contents.
Failure to follow these instructions can result in burns.
•Do not exceed one quart of content when blending hot product.
•Always place the cover and filler cap on the container when blending. For blending hot liquids, remove filler cap from container cover before blending.
Blending techniques
Icy drinks – Do not use blender to crush large ice cubes. The blender is not designed for this. Small ice cubes or crushed ice is recommended. Pour in liquid, then add ice. Cover. Set speed at HIGH (except model 901) and process until desired consistency is reached. Chunks of frozen fruit can be added to milk or fruit juice to produce a sherbet or slush.
Blending hot mixtures
IMPORTANT: To minimize the possibility of scalding, the following precautions MUST be observed:
•Do not exceed 1 quart of content when blending hot product. Remember that the volume of the product normally increases during processing.
•Always place the cover on the container and remove the filler cap from container cover when blending hot liquids to prevent the build up of pressure.
•Never stand with your face directly over the container when operating the blender where
steam may be released.
•Begin on LOW speed and then select a speed that produces a column of air in the center of the container.
Filler Cap
Use the filler cap to add liquids to the container while the unit is running.
6
Caring for the Blender
Cleaning Instructions
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Do not immerse base in water or other liquid.
Failure to follow these instructions can result in death, fire, or electrical shock.
wWARNING
Cut Hazard
Always place cover on jar when blending.
Do not put hands, spoons or other utensils in jar when blending.
Failure to follow these instructions can result in broken bones or cuts.
Sanitizing
1.Wash container as instructed in “General Cleaning.”
General cleaning
Do not allow food residue to dry on any part of the blender. Wash and rinse container, cutter unit assembly and base after each use, or whenever it will not be used again within one hour, as follows:
1.Remove the container from the base, and then remove the cover. Add cleaning solution to the container. Use a washing solution of hot water (less than 115° F/46° C) and a non-sudsing detergent. Use the recommended amount of detergent.
2.Scrub and flush out the container interior, cover and filler cap to remove food residue. Empty container.
3.Fill container 1⁄4 full with fresh washing solution and place it on the base.
4.Replace the cover on the container and run the blender on high speed (except model 901) for 2 minutes.
5.Repeat step 3 using clean rinse water (95° F/35° C).
6.Wipe down the container, filler cap, and cover with a soft cloth or sponge, dampened with fresh washing solution.
7.Wipe the exterior of the base with a damp cloth or sponge. The base contains electrical components: do not immerse, use a high-pressure washer, or use a dishwasher
to clean the base.
2.Fill container with sanitizing solution (See “Recommended Sanitizing Solution” below) and place on base.
3.Replace cover and filler cap and run on LOW (except model 901) speed for 2 minutes. Empty container.
4.Wipe the container exterior with a soft cloth or sponge dampened with sanitizing solution.
5.Immerse the cover and filler cap in sanitizing solution for two minutes.
6.Remove any remaining moisture from cutter assembly by replacing container on base with cover and filler cap in place. Then run blender
on HiGH (except model 901) speed for a minimum of 2 minutes.
7.To dry, place empty container on base and run on HIGH (except model 901) speed for two seconds.
8.When ready to use, rinse with clean water.
NOTE: Do not rinse container, cover or filler cap after sanitizing.
Recommended Sanitizing Solution:
The sanitizing solution should consist of 1 tablespoon of household bleach per 1 gallon of clean, cool water (60° F, 16° C) mixed according to the instructions on the bleach. When using a sanitizing solution other than that recommended, the sanitizing solution concentration should be tested using commercially available test strips and should indicate a concentration between 100 and 200 parts per million of bleach to water.
7
Caring for the Blender
Troubleshooting Guide
Problem . . . |
Solution . . . |
|
|
|
|
Blender fails to start |
• Check to see if unit is securely plugged into an electric outlet. |
|
or stops while it is |
• Check to see if the fuse for the electric outlet has blown or if a |
|
running and cannot |
circuit breaker has tripped. |
|
be restarted |
|
|
|
|
|
Ingredients will not mix |
• Check to see if enough liquid has been added to the ingredients. Mixture should |
|
properly |
be fluid and free-running at all times. |
|
|
• Solid pieces are too large. Pieces should not exceed 1″ (2.5 cm) cubes. |
|
|
• Container is too full. Do not fill past highest graduation marking. |
|
|
• Cutter unit blades are not sharp or are damaged. Inspect container and cutter |
|
|
assembly daily. Replace container and cutter assembly at least every 12 months |
|
|
or sooner if cutter assembly appears worn or damaged. |
|
|
• Check to see if cutter unit assembly is installed properly. |
|
|
• Select speed (on some models) to create a fluid blend. |
|
|
|
|
Maintenance
Inspect the blender and its various parts and replace as follows:
Daily |
Unplug the blender and remove the container from the base, and then inspect the container and |
|
cutter unit assembly for wear, nicks, and broken or loose blades. Replace if necessary. If the |
|
cutter assembly blades are loose, discontinue use immediately and replace the cutter assembly. |
|
Do not attempt to repair or tighten the cutter assembly. See “Replacement Parts” below. |
Weekly |
Unplug the blender, and then inspect the power cord insulation and power plug for cracks. |
|
Refer to “Requesting Assistance or Service” for repair or replacement. |
Yearly |
Replace the container and cutter unit assembly at least once a year. See “Replacement Parts” |
|
below. |
|
|
Replacement Parts
Refer to “Requesting Assistance or Service” to order parts below.
Model |
Part Description |
Part Number |
|
|
|
|
|
901 |
1 container |
6126-901 |
|
908 |
1 container |
6126-908 |
|
909 |
1 container |
6126-909 |
|
910 |
1 container |
6126-910 |
|
918 |
1 container |
98000 |
|
919 |
1 container |
98100 |
|
ALL |
Cutter unit assembly |
99100 |
|
|
|
|
|
8
Product Warranty
This Warranty supercedes all other Product Warranties
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase, except as noted below. During this period, we will repair or replace this product, at our option, at no cost to you. THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY LIABILITY IS EXPRESSLY LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS FOR SPECIAL,INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED. There is no warranty with respect to the following, which may be supplied with this product: (motor brushes, container and cutter assembly, clutches, bristle brushes, funnel, stainless steel cup, agitators, carafes, etc.). This warranty extends only to the original purchaser and does not cover a defect resulting from abuse, misuse, neglect, unauthorized repair, or use not in conformity with the printed directions. Always use this product in the manner provided in the Operation Manual. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state, or province to province. Some states do not allow limitations on implied warranties or special, incidental or consequential damages, so the foregoing limitations may not apply to you.
If you have a claim under this warranty please contact our CUSTOMER SERVICE DEPARTMENT at 1-866-285-1087. (For faster service please have model, series, and type numbers ready for operator to assist you.) Reasonable proof of date of purchase must be presented; otherwise the effective date of the warranty will be based upon the date of manufacture plus ninety (90) days.
Hamilton Beach/Proctor-Silex, Inc. |
|
Commercial Customer Service |
|
263 Yadkin Road |
|
Southern Pines, NC 28387 |
5/03 |
9