Haier HL19R1, HLC19R1, HLC22K1, HL22K1, HL22F1 User Manual

...
0 (0)

R

HL19R1/HL19K1/HLC19R1/HLC19K1/HL22R1/HL22K1/HLC22R1

HLC22K1/HL22F1

LCD TV & LCD TV/DVD Combo

USER MANUAL

Please read this manual carefully before using this TV set and keep it for future reference.

WARNING AND CAUTION

CAUTION

!

RISK ELECTRIC SHOCK

DO NOT OPEN

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended

!to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. (This item is only for TV with DVD models.)

IMPORTANT SAFETY INSTRUCTIONS

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10)Only use attachments/accessories specified by the manufacturer.

11)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12)Unplug this apparatus during lightning storms or when unused for long periods of time.

13)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 15)The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use.

Safety Instructions(for TV with DVD)

PRECAUTIONS

FCC WARNING-This equipment may generate or use radio frequency energy.Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

LASER SAFETY

This unit employs a laser.Only a qualified service person should remove the cover or attempt to service this device,due to possible eye injury.

CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.DO NOT STARE INTO BEAM.

LOCATION:INSIDE,NEAR THE DECK MECHANISM.

CONTENT

Safety Notice Items...................................................................................

1

Front Panel Controls..................................................................................

2

Connection Options...................................................................................

3

Remote Control ........................................................................................

4

Remote Control Key Functions....................................................................

 

 

5

Connection Instructions.............................................................................

7

External equipment Connections..............................................................

 

 

7

Antenna Connection.............................................................................

7

VGA Setup.............................................................................................

 

 

8

Component Setup................................................................................

8

VCR Setup...........................................................................................

 

 

9

HDMI Input.........................................................................................

9

Cable TV Setup....................................................................................

10

External Component Source Setup.......................................................

10

Basic Operating Instructions.......................................................................

 

 

11

Switch On/Off the TV set..........................................................................

11

Choose the input source..........................................................................

11

Audio Control..........................................................................................

 

 

11

Mute......................................................................................................

11

INFO.....................................................................................................

11

Select the TV Channel You Want.............................................................

12

Picture Mode...........................................................................................

 

 

12

Audio Mode............................................................................................

12

Sleep.....................................................................................................

12

GUIDE...................................................................................................

12

ARC button.............................................................................................

 

 

12

.Button...................................................................................................

 

 

13

CH.LIST button.......................................................................................

13

FAVORATE button......................................................................................

 

 

13

Menu Operations.......................................................................................

 

 

14

Video Menu Options...............................................................................

14

Video Menu Options Continued...............................................................

15

Audio Menu Options................................................................................

16

Audio Menu Options Continued................................................................

17

Channel Menu Options.............................................................................

18

Channel Menu Options Continued..............................................................

 

 

19

Function Menu Options.............................................................................

 

 

20

Function Menu Options Continued..............................................................

 

 

21

Lock Menu Options ..................................................................................

 

 

23

Lock Menu Options Continued..................................................................

24

PC Menu Options....................................................................................

28

PC Menu Options Continued....................................................................

29

Stream media broadcast system............................................................

30

DVD Features..........................................................................................

 

 

32

Special Function Playback.......................................................................

34

DVD System Setup...................................................................................

 

 

35

Playable Discs.........................................................................................

 

 

39

Disc Protection and DVD Characteristics...................................................

40

Troubleshooting Guide...............................................................................

 

 

41

Specifications...........................................................................................

42

Warranty ..................................................................................................

43

Note: DVD is available only on certain models. Please refer to your original set

 

for specific details.

 

Safety Notice Items

Incorrect usage may cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To ensure your safety and extend the life-span of LCD-TV, please read the following items carefully before using:

Please read and understand all the instructions before operation;

Please keep this manual for later use;

Please comply strictly with the warning instructions on the machine and in this book;

Please comply with the instructions provided;

Please do not use additional devices that are not recommended by manufacturer:

Before operation, please make sure that the operating voltage of your unit is correct;

Do not place the unit on unstable, dusty and humid places;

Never put the unit in direct sunlight or near heat sources;

Allow enough space for proper ventilation;

Please keep water away from the LCD-TV . If water comes in contact with the LCD-TV, disconnect the power cord from the power source, then wipe the set with a dry soft cloth;

Do not remove the back cover. If service is needed, please contact an Authorized service technician.

Front Panel Controls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT MENU VOLVOL+ CH-

 

CH+ POWER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R1 series

K1series

F1series

Control Panel Function

1.POWER Press to turn on and off the TV.

2.INPUT Selects the input signals.

3.MENU Menu display. Press to access the on-screen menu display.

4.VOL- Volume down / Left button to adjust the item in the OSD. VOL+ Volume up / Right button to adjust the item in the OSD

/Press to enter.

5.CH- TV channel down / to select the item in the menu. CH+ TV channel up / to select the item in the menu.

6.Power indicator

7.Remote Sensor Receivers IR signals from the remote control.

Do not put anything near the sensor ,which may block the remote control signal.

Haier HL19R1, HLC19R1, HLC22K1, HL22K1, HL22F1 User Manual

Connection Options

DVD

R1 series

K1 series

STOP PLAY/PAUSE OPEN/CLOSE

OPEN/CLOSE

PLAY/PAUSE

STOP

PREV

PREV NEXT

NEXT

DVD insert

The above figure is for reference

only, connections may differ

 

depending upon the models and

 

terminals of some models may be

Label towards back

on the back bottom of the set

ATN IN

R-AUDIO-L

S-VIDEO IN

R-AUDIO IN-L

VIDEO

USB

VGA IN

PC AUDIO IN

HDMI

Pr

Pb

Y

 

 

 

 

 

 

 

COMPONENT IN

 

 

 

 

 

 

1.ANT IN(Antenna Input) Connect cable or antenna signals to the TV, either directly or through your cable box.

2.Headphone jack : Headphone audio output terminal.

3.Audio in Connect audio output from an external device to these jacks. 4.S-VIDEO Connect S-Video out from an S-Video device to the jacks.

5.Audio in Connect audio output from an external device to these jacks. 6.Video in Connect video output from an external device to this jack.

7.USB input Connect a USB flash drive to view JPEG images or listen to MP3

 

songs.

8.VGA

Connect to the VGA 15PIN analog output connector of a PC

 

graphics card to use set as a PC display.

9.PC audio in Connect the audio output from the pc to the PC audio input port. 10. HDMI: Connect a HDMI device to receive digital audio and uncompressed

digital video.

11. Component Input Connect a component video device to these jacks.

Remote Control

Installing Batteries

Remove the battery cover.

Insert two size AAA batteries matching the +/-polarities of the battery to the +/- marks inside the battery compartment.

Precautions

Make sure that there is no obstacle between the remote controller and television set.

Keep the remote control away from heat sources or humid areas to ensure effective performance of the remote.

As strong light may interfere with the signals, change your position to operate the remote control if

the television cannot be turned on or off as expected.

Make sure that two AA 1.5V or AAA depending up the model alkaline batteries are loaded. The batteries must be of the same type, must be inserted properly, and must not be rechargeable.

Remote Control Key Functions

When using the remote control, aim it towards the remote sensor on the TV

1

USB

 

 

DVD

 

2

 

 

 

 

21

3

GUIDE

CCD

MTS/SAP CH.LIST

22

 

 

 

 

4

PICTURE

AUDIO

ARC

FAVORITE

23

5

 

 

 

 

24

6

 

 

 

 

25

 

 

 

 

 

26

7

INPUT

 

 

27

MUTE

 

 

RECALL

8

 

 

 

 

 

 

 

28

9

 

VOL

CH

 

 

 

 

 

 

 

 

 

 

 

29

 

MENU

 

 

EXIT

 

10

 

 

 

 

30

11

 

 

 

 

31

 

 

ENTER

 

 

 

 

 

 

SLEEP

 

 

DISPLAY

 

12

 

 

 

 

32

13

OPEN/CLOSE PLAY/PAUSE

STOP

REPEAT

33

 

14

 

 

 

 

34

15

REV

 

PREV

NEXT

35

16

D.MENU

D.CALL

D.AUDIO

SETUP

36

17

37

 

 

 

 

18

SEARCH

ANGLE

SUBTITLE

PROGRAM

38

 

 

19

 

 

 

 

39

20

 

 

 

 

40

(For TV with DVD)

1.Press to turn on and off the TV 2.Press to switch input source to USB in

3.Display the guide when you are watching analog or

digital channels

4.Select a closed caption

5.Press repeatedly to cycle through the available picture

modes

6.Press to cycle through different sound settings

7.Show the input source

 

8.Switches the video sound on or off

UP

9.Press to adjust the volume

RIGHT

LEFT

10.Press to open the on-screen menu

 

11.Thumbstick(Up/Down/Left/Right)

DOWN

Allows you to navigate the on-screen menus

 

and adjust the system settings to your preference. 12.Press to display the sleep timer option 13.DVD PLAY/PAUSE

14.DVD Open/close 15.DVD FAST FORWARD 16.DVD FAST REVERSE 17.DVD CALL

18.DVD MENU 19.DVD SEARCH 20.DVD ANGLE

21.Press to switch input source to DVD in 22.Open the channel list in TV

23.Select MONO, STEREO, SAP in NTSC system 24.Open the favourite channel list in TV

25.Press to change the aspect ratio 26.Press to change a channel

27.Press to select digital channels. For example, to enter “54-3”, press “54”, “ ” and “3”

28.Press to jump back and forth between two channels 29.Press to scan through channels. To scan quickly

between the last two channels, press and hold down either +/- .

30.Exit On Screen Display

31.Accesses the highlighted item in the on-screen menu 32.Press to display the TV status information on the top

of the TV screen 33.DVD STOP 34.DVD REPEAT

35.DVD Previous Chapter 36.DVD Next Chapter 37.DVD AUDIO Mode 38.DVD SETUP

39.DVD PROGRAM

40.DVD SUBTITLE

Remote Control Key Functions

When using the remote control, aim it towards the remote sensor on the TV

 

PICTURE

 

 

 

AUDIO

14

1

 

 

 

 

 

15

2

ARC

 

CCD

MTS/SAP

SLEEP

16

 

 

 

 

 

3

1

 

2

3

17

 

 

 

 

4

 

5

6

 

 

7

 

8

9

18

 

 

 

4

INPUT

0

 

19

 

 

 

 

 

 

MENU

 

 

 

MUTE

 

5

 

 

 

 

 

20

 

 

 

CH+

 

 

6

VOL- ENTER VOL+

21

 

 

 

 

EXIT

 

CH-

RECALL

 

 

 

 

 

 

7

 

 

 

 

 

22

8

USB

PLAY/PAUSE

STOP

REPEAT

23

 

 

 

 

 

9

REV

 

 

PREV

NEXT

24

10

 

 

 

 

 

25

11

DISPLAY

 

GUIDE

FAVORITE

CH.LIST

26

12

 

 

 

 

 

27

13

 

 

 

 

 

28

(For TV without DVD)

1.Press repeatedly to cycle through the available picture modes

2.Press to change the aspect ratio

3.Select a closed caption

4.Show the input source

5.Press to open the on-screen menu

6.Volume/Channel Selection 7.Exit On Screen Display

8.Press to switch input source to USB in

9.DVD PLAY/PAUSE 10.DVD fast reverse 11.DVD fast forward

12.Press to display the TV status information on the top of the TV screen

13.Shows program schedule in TV

14.Press to turn on and off the TV

15.Press to cycle through different sound settings

16.Press to display the sleep timer option

17.Select MONO, STEREO, SAP in NTSC system

18.Press to change a channel

19.Press to select digital channels. For example, to enter “54-3”, press “54”, “ ” and “3”.

20.Switches the video sound on or off

21.Accesses the highlighted item in the on-screen menu

22.Press to jump back and forth between two channels

23.DVD REPEAT 24.DVD STOP 25.DVD Next Chapter

26.DVD Previous Chapter 27.Open the channel list in TV

28.Open the favorite channel list in TV

Note: the instruction on this manual takes remote of TV with DVD for example.

Connection Instructions

External Equipment Connections

Antenna Connection

-Antenna or Cable Service with a Cable Box Connections

-For optimum picture quality, adjust antenna direction if needed.

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

wall antenna socket

Bronze Wire

 

RF coaxial wire (75 ohm)

 

VHF antenna

 

 

 

 

 

 

UHF antenna

Turn clockwise to tighten.

 

 

 

 

Bronze Wire

outdoor

Be careful not to bend the bronze

antenna

wire when connecting the antenna.

Single-family Dwellings /Houses

 

(Connect to wall jack for outdoor antenna)

 

To improve picture quality in a poor signal area, purchase and install a signal amplifier.

If the antenna needs to be split for two Tvs, install a 2-Way Signal Splitter in the connections.

If the antenna is not installed properly, contact your dealer for assistance.

NOTE: Cables shown are not included with the TV

IN AUDIO PC IN VGA

Connection Instructions

VGA Setup

You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied).

Connection and use steps:

1.Read the user guide supplied with your computer and ensure that it has

a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; 3.Connect a D type 15-pin PC interface cable ( not supplied ) to the PC video

interface connector on the PC. Then

connect the other end to the PC video interface connector on the back of the LCD-TV.Tighten the screws on the PC connectors once they are firmly

connected;

4.Turn on the power of the LCD-TV first , and then turn on the power of the PC;

5.Press INPUT button to set the video input mode of the LCD-TV to PC; Once the input for PC is selected and if you see no image press function F8 on you pc.

6.Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

Resolution

Mode

Resolution

Line frequency(KHz)

Frame frequency(Hz)

VGA

640x480

31.5

60

SVGA

800x600

37.9

60

XGA

1024x768

48.4

60

Note: All above listed are subject to VESA criteria.

Component Setup

How to connect

Connect the DVD video outputs (Y, PB, PR) to the Component(Y, Pb, Pr) IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1.Turn on the DVD player, insert a DVD.

2.Use INPUT button on the remote control to select the proper input.

Pr

Y Pb IN COMPONENT

VIDEO-S L-AUDIO-R

 

IN

Connection Instructions

VCR Setup

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

Connection Option 1

 

 

ATN

Set VCR output switch to 3 or 4 and then

 

 

IN

 

 

 

tune TV to the same channel number.

 

 

 

Connection Option 2

 

Pr

 

INCOMPONENT

Y Pb

VIDEO-S L-AUDIO-R

When connecting the TV to VCR, match

1. Connect the audio and video cables from

 

 

 

the VCR's output jacks to the TV input jacks,

 

 

 

as shown in the figure.

 

 

 

the jack colors (Video = yellow, Audio

 

 

IN

 

 

 

Left = white,and Audio Right = red).

 

 

AUDIO-R

If you connect an S-VIDEO output from

1

 

VCR to the S-VIDEO input, the picture

 

 

L-IN

quality is improved; compared to conne-

 

 

 

 

 

cting a regular VCR to the Video input.

2

 

VIDEO

2. Insert a video tape into the VCR and press

 

 

 

PLAY on the VCR. (Refer to the VCR owner

s

 

 

manual.)

 

 

 

.

 

 

 

3.Turn on the LCD-TV first ; and then turn on the

 

 

 

power of the AV device;

 

 

 

4.Press t INPUT button to set

 

 

 

the video input mode of the

 

 

VCR

LCD-TV to S-Video mode or

 

 

Video mode.

 

 

 

HDMI Input

How to connect

Connect the cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.

How to use

1.Select the input source by using INPUT button on the remote control or on the TV.

2.Operate the corresponding external equipment. Refer to external equipment operating guide.

HDMI

HDMI

Connection Instructions

Cable TV Setup

-After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner

device or cable TV converter box is connected to the TV.

-For further information regarding cable TV service, contact your local cable TV service provider(s).

Connection Option 1

1.Select 3 or 4 with channel switch on cable box.

2.Tune the TV channel to the same selected output channel on cable box.

3.Select channels at the cable box or with the cable box remote control.

Connection Option 2

1. Connect the audio and video cables from the Cable Box's output jacks to the TV input jacks, as shown in the figure.When connecting the TV to a Cable Box, match the jack colors

(Video = yellow, Audio Left = white, and Audio Right = red).

2.Select the input source by using the INPUT button on the remote control.

3.Select your desired channel with the remote control for cable box.

 

 

IN ATN

 

Pr

 

IN COMPONENT

Y Pb

VIDEO-S L-AUDIO-R

 

 

IN

 

 

AUDIO-R

 

 

L-IN

 

 

VIDEO

External Component Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1.Select the input source by using the INPUT button on the remote control.

2.Operate the corresponding external equipment. Refer to external equipment operating guide.

VIDEO L-IN AUDIO-R

Loading...
+ 34 hidden pages