Graco Inc Ultra Max 33Z9257 User Manual

Size:
918.19 Kb
Download

OPERATION

ULTRArMAX

695/795/1095/1595/Mark V –

All models not available in all countries.

3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure

Related manuals

. . . . . . . 309251

(695/795/1095)

 

. . . . . . . 309266 (1595/Mark V

)

3Z9257

Rev. B

B

245000 TI0765A

AutoClean

309278

309250

 

 

 

. . . . . . .

 

 

 

 

 

. . . . . . .

309252

309263

(695)

. . . . . . .

309639 . . . . . . .

309640 . . . . . . .

309260

309261

(795/1095)

 

 

. . . . . . .

309267

309268

(1595/Mark V)

INSTRUCTIONS

READ ALL INSTRUCTIONS AND WARNINGS

BEFORE SETTING UP OR OPERATING THIS UNIT.

You need:

Stwo adjustable wrenches

Stwo 5 gallon (19 liters) metal pails

Scompatible cleaning fluids

Oil Base

Latex

Clothing:

Srespirator

Ssafety glasses

Power: grounded outlet

Japan:

100V, 15A

United Kingdom:

110V, 15A

North/Latin Am:

120V, 15A

Europe/South Am:

230V, 10A

Australia/Asia:

240V, 10A

S12 AWG, (1.5 mm2) grounded extension cord up to

300 feet (100 M)

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Graco Inc. is registered to I.S. EN ISO 9001

WARNING

Fire and explosion hazard: Solvent and paint fumes can ignite or explode.

To help prevent a fire and explosion:

DUse only in an extremely well ventilated area.

DEliminate all ignition sources; such as pilot lights, cigarettes and plastic drop cloths (static arc hazard). Do not plug or unplug power cords or turn lights on or off in spray area.

DGround Sprayer, object being sprayed, paint and solvent pails. DHold gun firmly to side of grounded pail when triggering into pail. DUse only conductive airless paint hose.

DDo not use 1,1,1-trichloroethane,methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

Fluid injection and high pressure hazard: High pressure spray or leaks can inject fluid into the body.

To help prevent injection, always:

DEngage trigger safety latch when not spraying. DKeep clear of nozzle and leaks.

DNever spray without a tip guard.

DDo PRESSURE RELIEF if you stop spraying or begin servicing sprayer.

DDo not use components rated less than sprayer Maximum Working Pressure.

DNever allow children to use this unit.

If high pressure fluid pierces your skin, the injury might look like “just a cut”. But it is a serious wound! Get immediate medical attention.

2 3Z9257

CONTROLS /

/

/

 

 

 

Pressure Display /

 

Drain Valve /

/

On/Off Switch /

/

15/20 Ampere Switch

AutoCleant 309278

Pressure Control / /

Trigger Lock /

/

Contractor II

Contractor II

Contractor Contractor

PRESSURE RELIEF ///

Follow 1–5when you stop1

2

spraying.

 

3

4

5

3Z9257 3

STARTUP /

 

 

/

/

 

 

Flush with warm, soapy

 

1

WARNING

2

 

3

 

 

 

water.

 

 

 

 

 

 

 

 

 

 

 

Flush with mineral spirits.

 

 

 

 

 

Flush /

/

 

/

 

 

 

4

WARNING

 

5

 

6

 

7

 

 

 

 

 

 

 

 

 

 

10”

 

 

WASTE

 

 

 

 

 

FLUSH

 

 

FLUSH

 

 

 

WASTE

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

9

 

10

 

11

 

 

20”

 

 

1’

10”

 

 

WASTE

 

 

FLUSH

 

FLUSH

 

Prime /

 

 

 

/

 

 

12

WARNING

 

13

 

14

 

15

 

 

 

 

 

WASTE

 

 

 

 

 

 

 

 

PAINT

Watch for paint.

 

 

Watch for paint.

 

 

 

 

 

4

3Z9257

 

 

 

 

 

 

SPRAY /

/

 

/

 

 

1

WARNING

 

2

3

4

 

 

 

 

CLEAR CLOG /

 

/

/

 

 

1

WARNING

 

2

 

3

 

 

 

 

 

CHANGE PAINT /

/

/

 

 

1

 

 

2

AutoCleant 309278

3

 

 

 

 

 

Prime

 

 

 

 

 

 

 

 

Pressure Relief

or Flush

 

 

 

 

 

 

GROUNDING /

 

 

 

 

1

WARNING

 

2

3

 

 

 

 

 

 

Grounded Outlets Required

 

 

 

 

 

 

 

 

 

3Z9257

5

SHUTDOWN /

 

/

/

 

1

 

2

WARNING

4

5

 

AutoCleant

 

 

 

 

 

 

 

 

3

 

 

Pressure Relief

 

309278

 

 

 

or 3–22

 

 

 

 

 

 

 

6

7

 

8

9

10

 

 

 

 

 

20”

 

 

 

Flush

 

 

 

 

 

 

 

Pressure Relief

 

 

 

 

FLUSH

 

11

 

 

12

13

14

 

FLUSH

 

 

 

 

15

 

 

16

17

18

 

 

 

 

 

20”

 

 

 

 

Mineral Spirits

WASTE

 

 

 

 

 

19

 

 

20

21

22

 

Pressure Relief

 

 

 

 

 

 

 

Mineral Spirits

 

 

6

3Z9257

 

 

 

 

DISPLAY /

ERROR CODES /

 

PRESSURE

 

GAL/LTR

 

 

TIMER

 

 

Service manual

 

 

High pressure limit

 

PRESSURE

 

 

/

 

 

 

 

 

 

 

Transducer fault /

 

 

 

 

High line voltage

 

 

 

 

 

 

GAL/LTR

High current

 

 

 

 

Motor overheated

Service

 

 

 

 

TIMER

 

AutoCleant

> 2000 psi in

 

 

Timer Mode

 

 

 

 

Low line voltage

 

 

 

 

Turn power OFF/ON to reset

 

 

 

309278

 

 

 

 

Noise

 

 

 

 

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 dB(A)*

 

 

91 dB(A)*

Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 dB(A)*

 

 

82 dB(A)*

* ISO 3744

 

 

 

 

91 dB(A)*

82 dB(A)*

Graco Standard Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Gracocomponent parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

3Z9257 7

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CHINESE, JAPANESE AND KOREAN CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English.

ADDITIONAL WARRANTY COVERAGE /

Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty Program”.

TO PLACE AN ORDER OR FOR SERVICE, contact your Graco distributor, or call1–800–690–2894to identify the nearest distributor.

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Sales Offices: Minneapolis, Detroit

Foreign Offices: Belgium, Korea, Hong Kong, Japan

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

http://www.graco.com

PRINTED IN USA 309257 December 2000, revised 12/2002

8 3Z9257