Graco Inc A User Manual

Size:
1.23 Mb
Download

3Z9097

INSTRUCTIONS –

Rev. A

 

SG3-E,SG3-AAirless Spray Guns

3600 psi (248 bar, 24.8 MPa) Maximum Working Pressure

SG3-E243238, A

Reversible Tip Guard, 515 Tip

SG3-A243382, A

Reversible Tip Guard, 515 Tip

All models not available in all countries

TI0103

243012

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Graco Inc. is registered to I.S. EN ISO 9001

WARNING

Fire and explosion hazard: Solvent and paint fumes can ignite or explode.

To help prevent a fire and explosion: DUse in an extremely well ventilated area.

DEliminate all ignition sources; such as pilot lights, cigarettes and static arcs from plastic drop cloths. Do not plug or unplug power cords or turn lights on or off in spray area.

DGround Sprayer, object being sprayed, paint and solvent pails. DHold gun firmly to side of grounded pail when triggering into pail. DUse only conductive airless paint hose.

DDo not use 1,1,1-trichloroethane,methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

Fluid injection and high pressure hazard: High pressure spray or leaks can inject fluid into the body.

To help prevent injection, always:

DEngage trigger safety latch when not spraying. DKeep clear of nozzle and leaks.

DNever spray without a tip guard.

DDo PRESSURE RELIEF if you stop spraying or begin servicing sprayer.

DDo not use components rated less than sprayer Maximum Working Pressure.

DNever allow children to use this unit.

DBrace yourself; gun may recoil when triggered.

If high pressure fluid pierces your skin, the injury might look like “just a cut”. But it is a serious wound! Get immediate medical attention.

23Z9097

CONTROLS /

/

/

 

 

 

 

 

 

 

 

 

Needle

Adjustment

 

Trigger Lock /

/

 

/

 

/

/

 

 

 

 

 

 

 

 

Tip Guard /

 

 

 

 

/

 

 

 

/

 

 

 

Trigger /

/

 

 

 

 

 

 

 

 

 

Tip /

/

/

 

 

 

 

 

 

 

 

 

 

 

TI0103

 

 

 

PRESSURE RELIEF /

/

/

 

 

 

 

 

Follow 1–5when you

1

2

 

 

 

 

 

stop spraying.

 

 

 

 

 

 

3

 

 

 

4

5

 

 

 

ALIGN SPRAY /

 

/

/

 

 

 

1

 

 

2

 

3

 

 

 

 

 

 

 

 

 

 

3Z9097

3

ADJUST SPRAY /

 

/

 

/

 

1

WARNING

2

 

3

 

4

 

 

 

CLEAR CLOG /

 

/

 

/

CAUTION /

 

 

/

 

 

 

 

 

 

1

WARNING

2

 

3

 

 

 

 

 

 

REPLACE NEEDLE /

/

 

 

/

1

 

 

2

3

 

4

 

 

 

 

 

 

OLD

5

 

 

6

7

 

8

 

 

 

SILICON

 

 

 

 

 

 

 

 

NEW

LOOSE

CLEAN

 

 

 

 

 

GREASE

 

 

 

 

 

 

 

 

 

4

3Z9097

 

 

 

 

 

9

Grease

10

 

11

 

 

 

 

 

26–32ft–lb(19–24N.m)

 

ADJUST NEEDLE /

/

/

 

 

1

2

 

3

4

 

 

 

 

 

PRIME SPRAYER

 

 

 

 

3/4

 

 

5

6

 

 

A

 

 

 

 

 

 

 

 

IF

 

THEN

 

 

 

IF

 

THEN

 

 

 

 

 

B

 

 

 

 

 

ADJUST NEEDLE

 

 

SQUEEZE

RELEASE

 

 

 

 

 

 

 

 

7

 

 

 

A

 

 

 

 

 

 

 

 

IF

 

THEN

 

 

 

IF

 

THEN

 

 

 

 

 

B

 

 

 

SQUEEZE

 

ADJUST NEEDLE

 

 

 

 

 

3Z9097

5

Parts Drawing /

/

243238, A

10

243382, A

26

1

8

2

1

7n

15a

n2

6

35

1 Included with 1

 

n15

 

 

33

23

2 Included with 33

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22

 

 

 

 

 

 

 

24

TI0104

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

Parts List /

/

 

 

/

 

Ref.

 

 

 

Ref.

 

 

 

No.

Part No.

Description

Qty.

No.

Part No.

Description

Qty.

1

218070

KIT, repair, gun

1

33

 

Kit, replacement, trigger

 

2n

243161

GUARD, tip, RAC 5

1

 

243553

243382

1

4

 

GUARD, trigger

 

 

243639

243238

1

 

195495

243238

1

34Y

222385

CARD, WARNING, not shown

1

 

190975

243382

1

35Y

290230

LABEL, WARNING, 243382 only

1

5

238200

KIT, swivel

1

 

 

 

 

6n

218131

FILTER, gun

1

Y Replacement Danger and Warning labels, tags and cards are

 

7n

179733

SEAL, sleeve

1

available at no cost.

 

8

195395

CAP, end

1

n Keep these spare parts on hand to reduce down time.

 

10

115484

PIN, actuator

2

Y

 

 

 

15n

286515

TIP, spray, cylinder; size 515, includes 15a 1

 

 

 

 

 

 

 

15a

243281

SEAT, cylinder

1

n

 

 

 

 

 

 

 

22

113409

RETAINER, guard

1

 

 

 

 

23

 

HANDLE, gun

 

 

 

 

 

 

195788

243238

1

 

 

 

 

 

195920

243382

1

 

 

 

 

24

115485

O-RING

1

 

 

 

 

26

195390

HOUSING, fluid

1

 

 

 

 

63Z9097

Graco Standard Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Gracocomponent parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CHINESE, JAPANESE AND KOREAN CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English.

3Z9097 7

ADDITIONAL WARRANTY COVERAGE

Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty Program”.

TO PLACE AN ORDER OR FOR SERVICE, contact your Graco distributor, or call1–800–690–2894to identify the nearest distributor.

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Sales Offices: Minneapolis, Detroit

Foreign Offices: Belgium, Korea, Hong Kong, Japan

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

http://www.graco.com

PRINTED IN USA 3Z9097 1/2000

83Z9097