D V R 4 2 0 0 / 4 2 5 0 DVD PLAYER + VCR
with
50 |
only |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
User's guide
Safety Precautions
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
This DVD+VCR employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference should the unit require maintenance, contact an authorized service location (see service procedure).
Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the product and receiver.
Connect the product into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTES ON COPYRIGHTS:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission.
This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is found on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase.
Model No. ___________________________________
Serial No. ___________________________________
2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.Read These Instructions
All the safety and operating instructions should be read before the product is operated.
2.Follow All Instructions
All operating and use instructions should be followed.
3.Keep These Instructions
The safety and operating instructions should be retained for future reference.
4.Heed All Warnings
All warnings on the product and in the operating instructions should be adhered to.
5.Power Sources
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
6.Grounding or Polarization
Do not defeat the safety purpose of the polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
8.Heat
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Water and Moisture
Do not use this apparatus near water. For example: near a bath tub, wash bowl, kitchen sink, Laundry tub, in a wet basement; or near a swimming pool.
10.Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
11.Power-Cord Protection
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
12.Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles, this can result in a risk of fire or electric shock.
13.Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A), ANSI/NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE INSTRUCTIONS
Antenna Lead in Wire
Ground
Clamp
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
Electric Service 
(NEC Section 810-21)
Equipment
|
|
|
|
|
Ground Clamps |
|
|
|
|
|
|
Power Service Grounding |
|
|
|
|
|
|
Electrode System |
|
NEC - NATIONAL ELECTRICAL CODE |
||||||
(NEC Art 250, Part H) |
||||||
14.Lightning
Unplug this apparatus apparatus during lightning storms or when unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
15.Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16.Object and Liquid Entry
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
17.Attachments
Only use attachments/accessories specified by the manufacturer.
INTRODUCTION
3
IMPORTANT SAFETY INSTRUCTIONS (Continued)
18.Accessories
Use only with the cart, stand, tripod, bracket, or table specified by the man-
ufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
19.Damage Requiring Service
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normal, or has been dropped.
20.Servicing
Do not attempt to service this product yourself as opening or removing the cover may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21.Replacement parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22.Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
23.Disc Tray
Keep your fingers well clear of the disc tray as it is closing. It can cause personal injury.
24.Burden
Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious damage to the product.
25.Connecting
When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner’s manual of the other equipment carefully and follow the instructions when making any connections.
26.Sound Volume
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.
27.Sound Distortion
Do not allow the product to output distorted sound for a longtime. It may cause speaker overheating and fire.
28.Earphone
When you use the earphone, keep the volume at a moderate level. If you use the earphone continuously with high volume sound, it may cause hearing damage.
29.Laser Beam
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage.
30.Disc
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.
4
Table of Contents
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . 3-4 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14
Connecting antenna/cable TV to a DVD+VCR . . 12
Basic TV Connections . . . . . . . . . . . . . . . . . . . . 13
Optional TV Connections . . . . . . . . . . . . . . . . . . 13
Optional Equipment Connections . . . . . . . . . . . . 14
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 15
Setting the On-Screen Display . . . . . . . . . . . . . . 15
The VCR Setup Menu . . . . . . . . . . . . . . . . . . . . 16
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 17
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-21
General Information . . . . . . . . . . . . . . . . . . . . . . 18
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 18
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 19-21
Initial Settings General Operation . . . . . . . . . 19
Language . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Others (DRC/Vocal) . . . . . . . . . . . . . . . . . . . 20
Parental Control . . . . . . . . . . . . . . . . . . . . . . 21
Operation
VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . 22-27
Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . 22 Special Effects Playback . . . . . . . . . . . . . . . . . . 22
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Still Picture and Frame-by-Frame Playback . 22Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . 22Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Normal Recording . . . . . . . . . . . . . . . . . . . . . . . 23 Timer Recording . . . . . . . . . . . . . . . . . . . . . . 23-24 One-Touch Recording . . . . . . . . . . . . . . . . . . . . 25 Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . 25 Copying from DVD to VCR. . . . . . . . . . . . . . . . . 25 VHS Hi-Fi Stereo System/MTS Broadcast . . . . . 26 Tape Counter Memory Feature. . . . . . . . . . . . . . 27 Additional Information . . . . . . . . . . . . . . . . . . . . 27
DVD and Audio CD Operation . . . . . . . . . . . . . 28-31
Playing a DVD and Audio CD. . . . . . . . . . . . . . . 28 General Features . . . . . . . . . . . . . . . . . . . . . . . . 28
Moving to another TITLE . . . . . . . . . . . . . . . 28Moving to another CHAPTER/TRACK . . . . . 28Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . 28Still Picture and Frame-by-Frame Playback . 29Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 293D Surround . . . . . . . . . . . . . . . . . . . . . . . . 29Time Search . . . . . . . . . . . . . . . . . . . . . . . . 30Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Mark Search . . . . . . . . . . . . . . . . . . . . . . . . 30Changing the Audio Language . . . . . . . . . . . 30Changing the Audio Channel . . . . . . . . . . . . 30
Special DVD Features . . . . . . . . . . . . . . . . . . . . 31
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 31Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 31Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 31Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Programmed Playback with Audio CD . . . . . . . . 33
MP3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 32 Playing an MP3 Discs . . . . . . . . . . . . . . . . . . . . 32 Programmed Playback with MP3 Discs . . . . . . . 33
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 36
Technical Specifications . . . . . . . . . . . . . . . . . . . . 37
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
About the symbols for instructions
Indicates hazards likely to cause harm to the unit itself or other material damage.
Indicates special operating features of this unit. 
Indicates tips and hints for making the task easier.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
INTRODUCTION
5
Before Use
Playable Discs
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a CD-R or CD-RW that contains audio titles or MP3 files.
Notes
–Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot be played on the unit.
–The unit cannot play discs that contain data other than MP3 and CD-DA data.
–Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
–Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
Notes on DVDs
Some playback operations of DVDs may be intentionally fixed by software manufacturers. As this unit plays DVDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Refer also to the instructions supplied with the DVDs. Some DVDs made for business purposes may not be played on the unit.
Regional code of the DVD+VCR and DVDs
This DVD+VCR is designed and manufactured
for playback of region 1 encoded DVD software. 1 The region code on the labels of some DVD
discs indicates which type of DVD+VCR can play those discs. This unit can play only DVD discs labeled 1 or ALL. If you try to play any other discs, the message
“Check Regional Code” will appear on the TV screen.
Some DVD discs may not have a region code label even though their playback is prohibited by area limits.
Note on DTS-encoded CDs
When playing DTS-encoded CDs, excessive noise may be exhibited from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit.
Disc-related terms
Title (DVD only)
The main film content or accompanying feature content or music album.
Each title is assigned a title reference number enabling you to locate it easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enable you to locate the chapter you want. Depending on the disc, not all chapters may not be recorded.
Track (audio CD only)
Sections of a picture or a musical piece on an audio CD. Each track is assigned a track number, enabling you to locate the track you want.
Remote control battery installation
Detach the battery cover on the rear of the remote control, and insert two R03 (size
AAA |
AAA |
AAA) batteries with and aligned |
|
|
|
|
|
correctly. |
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons.
Distance: About 23 ft (7 m) from the front of the remote sensor
Angle: About 30° in each direction of the front of the
remote sensor
6
Before Use (Continued)
Precautions
Handling the unit
When shipping the unit
Retain your original shipping carton and packing materials. For maximum protection, re-pack the unit as it was originally packaged at the factory.
When setting up the unit
The picture or sound of nearby electrical equipment may cause distortion during playback. When this occurs, position the unit away from the interfering devices, or turn off the unit after removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They may leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
To obtain a clear picture
The DVD+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.)
For details, please contact your nearest dealer.
Notes on Discs
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
Yes 
No 
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
Cleaning the Video Heads
Playing poor quality or damaged tapes can contaminate the video heads. Use only high quality tapes in your DVD+VCR. Dirt which accumulates on the video heads may cause the picture to blur. If this happens, the video heads need to be cleaned. Purchase a non-abrasive head cleaning tape from your video dealer.
About Symbols
About the 
symbol display
“ ” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is applicable only to the disc represented by the symbol.
DVD DVD
Audio CDs.
INTRODUCTION
7
Front Panel
VCR EJECT ( Z )
Ejects the tape in the VCR deck.
DVD EJECT ( Z )
Opens or closes the disc tray to load or unload discs.
Disc Tray (DVD deck)
Insert a disc here.
Display window
Shows the current status of the DVD+VCR.
Remote Sensor
Point the remote control here.
Video Cassette Compartment (VCR deck)
Insert a video cassette here.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COPY |
|
|
|
|
|
|
|
|
|
|
|
|
|
Press to copy a DVD in the DVD deck to a |
|
|
|
|
|
|
|||
|
|
|
|
|
|
VHS tape in the VCR deck (see page 25). |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
DVD/VCR |
|
|
VIDEO IN/AUDIO |
|||
|
|
|
|
|
|
|
|
|
|
|
IN (Left/Right) |
||||
|
|
|
|
|
|
Toggles control between the |
|
|
|||||||
|
|
|
|
|
|
|
|
Connect the |
|||||||
|
|
|
|
|
|
DVD deck and the VCR deck. |
|
|
|||||||
|
|
|
|
|
|
|
|
audio/video output |
|||||||
|
|
|
|
|
|
REC |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
of an external |
||||
|
|
|
|
|
|
To record normally or to acti- |
|
|
|
|
|
source (Audio |
|||
|
|
|
|
|
|
vate One-Touch Recording. |
|
|
|
|
|
system, |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
TV/Monitor, |
||
|
|
|
|
|
Forward Skip/Scan ( M / > ) |
|
|
|
|
|
Another VCR). |
||||
|
|
|
|
|
DVD: Go to NEXT chapter/track. Press and |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
hold for two seconds for a fast forward search. |
|
|
|
|
||||||
|
|
|
|
|
VCR: Advances the tape during the STOP |
|
|
|
|
|
CH (v/V) |
||||
|
|
|
|
|
mode or for fast forward picture search. |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
To scan up or down |
||
|
|
|
|
STOP ( x ) |
|
|
|
|
|
through memorized |
|||||
|
|
|
|
Stops playback. |
|
|
|
|
|
channels. |
|||||
|
|
|
|
|
|
|
|
||||||||
|
|
|
Reverse Skip/Scan ( m / . ) |
|
|
|
|
TV VIEW |
|||||||
|
|
|
DVD: Go to beginning of current |
|
|
|
|
||||||||
|
|
|
|
|
|
|
Changes the view on |
||||||||
|
|
|
chapter/track or to previous chapter/track. |
|
|
|
|
||||||||
|
|
|
|
|
|
|
your television among all |
||||||||
|
|
|
Press and hold for a fast reverse search. |
|
|
|
|
||||||||
|
|
|
|
|
|
|
the DVD+VCR input |
||||||||
|
|
|
VCR: Rewinds the tape during the STOP |
|
|
|
|
||||||||
|
|
|
|
|
|
|
sources: DVD, VCR, |
||||||||
|
|
|
mode or for fast reverse picture search. |
|
|
|
|
||||||||
|
|
PLAY |
|
Child Lock |
Tuner, Line 1, and Line 2. |
||||||||||
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|||||||||
|
|
Plays back a recorded tape |
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|||||||||
The Child Lock feature disables the front panel
POWER |
keys to prevent children from tampering with the |
|
Turns the DVD+VCR ON and OFF. |
||
DVD+VCR. Simply press CHILD LOCK on the |
||
|
||
|
remote control to toggle this feature on and off. |
8
Display Window
DVD DVD inserted.
CD Audio CD inserted.
A y B Indicates A-B repeat mode.
ALL Indicates repeat all mode
ANGLE active.
MP3 MP3 disc inserted.
PROG. Programmed playback active.
TITLE Indicates current title number.
CHP/TRK Indicates current chapter or track number
VCR Indicates that DVD+VCR functions are available when connected to TV via the RF antenna connection.
TIMER DVD+VCR is in timer recording or a timer recording is programmed.
REC VCR is Recording.
LOCK Front panel keys are locked.
A video cassette is in the VCR deck.
A B |
|
PROG. TITLE |
CHP/TRK |
VCR |
TIMER |
REC |
CDREC |
HI-FI |
|
ALL MP3 |
|
|
|
|
|
|
AM |
CD |
|
|
|
|
|
|
|
SP |
DVD |
|
|
|
|
|
|
|
LP |
ST |
SAP CH |
|
|
|
|
|
|
EP |
CH DVD+VCR is tuned to Channel XX.
SAP Indicates when a SAP BILINGUAL broadcast is being received.
ST Lights up when a stereo broadcast is being received.
Indicates total playing time, elapsed time, remaining time or current deck status (Playback, Pause, etc).
CDREC (Copy Disc Record) DVD to VCR copy is in progress.
HI-FI Indicates the VCR deck is playing back a tape recorded in HI-FI.
SP LP EP Displays the recording and playback speed.
AM AM time indicator.
INTRODUCTION
9
Remote Control
DVD & VCR select buttons
Sets the remote control to operate either the DVD deck or the VCR deck.
POWER
Turns the DVD+VCR ON and OFF.
TV/VCR
Switches between your TV tuner and the DVD+VCR tuner.
DISPLAY
Accesses on-screen display.
Switches among the clock, tape counter and tape remaining modes on the display.
1 2 3 4 (left/right/up/down)
-Selects menu items
-Selects channels on the VCR.
-Manually adjusts tracking.
SETUP/MENU
Accesses or removes DVD setup menu and VCR menu.
TITLE
Displays the Title menu of the disc if available.
PAUSE/STEP ( ; )
Pause playback or recording temporarily / press repeatedly for frame- by-frame playback.
STOP ( 9 )
Stops playback.
REC/OTR
Records normally or activates One
Touch Recording.
0-9 numerical buttons
Selects channels or menu items.
AUDIO
Selects DVD audio language or CD audio channels (Stereo/Left/Right).
SUBTITLE
Selects a subtitle language.
REPEAT
Repeat chapter, track, title, all.
RETURN
Exits the setup menu.
RANDOM/SKIP
-Plays tracks in random order.
-Fast forwards picture search through
30 seconds of recording.
A-B/SP/EP
-Repeats sequence.
-Selects recording speed
SEARCH
Displays MARK SEARCH menu.
LAST CH
Displays last channel viewed.
EJECT
-Opens and closes the disc tray.
-Ejects the tape in the VCR deck.
TV VIEW
Cycles through the 3 main output views:
DVD, Tuner and VCR.
ENTER
Selects menu items.
DISC MENU
Accesses menu on a DVD disc.
INPUT
To select the VCR deck’s source (Tuner,
LINE 1, or LINE 2).
FF ( T )
DVD; Searches forward* / skips to next chapter or track.
VCR; Advances the tape from STOP mode or for fast forward picture search.
PLAY ( 2 )
Starts playback.
REW ( S )
DVD; Searches backward* / skips to beginning of current chapter or track or goes to previous chapter or track.
VCR; Rewinds the tape from STOP mode or for fast reverse picture search.
* Press and hold button for about two seconds.
PROG.PLAY
Selects or exits Program menu.
CLEAR
Removes a track number on the Program menu or a mark on the MARK
SEARCH menu. Also clears VCR tape counter settings.
ANGLE
Selects a DVD camera angle if available.
ZOOM
Enlarges video image.
MARK
Marks any point during playback.
CHILD LOCK
Disables front panel keys.
10
Rear Panel
DVD/VHS OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV or A/V receiver with video and audio inputs.
VHS IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR).
AC Power Cord
Plug into the power source.
ANTENNA INPUT
Connect the VHF/UHF/CATV antenna to this terminal.
COAXIAL (DVD digital audio out jack)
Connect to digital (coaxial) input on audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver, or stereo system.
RF OUT(DVD/VHS OUT)
Connect to a TV with RF coaxial inputs.
S-VIDEO OUT (DVD OUT)
Connect this terminal to the S-Video Input on a
TV or A/V Receiver.
COMPONENT VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
VIDEO OUT (DVD OUT)
Connect to a TV with video input.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
INTRODUCTION
11
Connections
Tips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the
DVD+VCR. Use only one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
For better sound reproduction, connect the DVD+VCR’s DVD/VHS AUDIO OUT jack to the audio in jacks of your amplifier, receiver, stereo or audio/ video equipment. See
Connecting to optional equipment on page 14.
Caution
Make sure the DVD+VCR is connected directly to the TV. Tune the TV to the correct video input channel.
Do not connect your DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.
Connecting antenna/cable TV to DVD+VCR
Disconnect the antenna leads from the rear of the 1 TV.
2a round cable as illustrated, it is a 75 ohm coaxial
antenna cable. This cable will connect directly to the connector marked ANT.IN on your DVD+VCR.Identify the type of cable from your antenna. If it is
Tip
If your antenna lead wire is a flat type antenna cable, connect it to a Antenna Adapter (300-ohm to 75-ohm) (not supplied) and slip the Adapter onto the ANT.IN connector. The Adapter does not screw on to the DVD+VCR, it just slips over the connector.
Without Cable Box
If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the ANT.IN connector on the DVD+VCR. Use the supplied round coaxial cable to connect between the unit’s RF. OUT connector and the 75 ohm antenna input connector on the TV.
With this connection, you can receive all channels.
With Cable Box
If a converter is required in your cable system, follow the instruction below:
The cable hookup permits both TV and VCR operation.
To view or record CATV channel
1Tune the TV to the DVD+VCR output channel (CH 3 or 4).
2Set the VCR channel selector to the output channel of the
Cable Converter box by pressing the CH/TRACK (▲/▼) or number (0-9) of your VCR. (Example: CH3)
3Select the channel to view at the Cable Converter Box.
Notes
With this connection, you CANNOT record one program while viewing another.
If you are using a cable box to tune channels, it is not necessary to do Auto Channel Programming, (Auto Channel Search) as indicated on page 16.
Cable TV
Wall Jack
Back Panel of
Typical Cable Box
Antenna Antenna
Cable TV
Wall Jack
Flat Wire (300 ohm)
300/75 ohm |
OR |
OR |
Rear of DVD+VCR |
Adaptor |
|
|
|
(Not provided) |
|
|
|
Rear of DVD+VCR
12
Loading...