DG-600 Standalone Proximity Reader
Operation User's Manual
I.Product Characteristic:
DG-600 has a 600 cards and PIN codes capacity and a reading time of 0.5-second max.
Transmitted to the host with extended Wiegand format auxiliary reader.
The Unit will operate with card only, PIN or card, PIN + card.
The logical memory does not allow duplicate cards to be programmed.
The host unit will lockout for 60 seconds if 5 incorrect password attempts are entered.
Beeper sound gives positive signal of all keypad activations.
Build in tamper switch that turns on alarm relay to ensure vandal proof operation.
Non-volatile memory stores all programmed information for at least 10 years, even in the event of total power failure.
Removable memory chip in the main control module allows on site replacement in the event of break down.
Fully Programmable via keypad and master code
Copyright Gianni Industries, Inc. All Rights Reserved. |
|
P-MU-DG600 Ver. B Publish:2004.08.27 |
Page: 1/ 6 |
II.Specifications:
Operating Voltage DC +8.5V to 16V
Current Draw Average 50mA, Peak 100mA @ 12Vdc
Transmitting Frequency 125 KHz
Memory Volume 600 Proximity cards/tokens and PIN codes
Read Range Up to 10 cm (Depending on local installation conditions)
Keyboard 12 digits keypad (0~9, *, #)
Input Request-to-exit, door reed switch, auxiliary reader
Relay Electric Current 2A MAX @30Vdc 0.4A @ 120Vac
The system will shut down for 60 seconds while 5 times of
Invalid PIN Lock-out incorrectly Master Codes enrolled or PIN codes attemptedNone beeper signal of keypad activations .
Strike Time: 1~99 seconds (adjustable)
Relocking timer Strike mode: Access Timer or Latch
Door Held Open Alarm: 10~990
Alarm Function Door Forced Alarm
Panel Temper Alarm
DG-600E: Wiegand 44 or 26-bit only format (adjustable), hexadecimal (Em 64-bit standard R/O or compatible)
Format DG-600H: Wiegand 26~37 or 26-bit only format (adjustable), hexadecimal (125KHz 26~37-bit R/O or compatible)
Case Material ABS (UL94V0)
Color Dark gray/ Beige White
Operating Temperature -20~+70
Ambient Humidity 5~95% relative humidity non-condensing
Visual Signals 3 LED display with audible indication (Red/Yellow/Green)
EMC Meet CE requirement
Copyright Gianni Industries, Inc. All Rights Reserved. |
|
P-MU-DG600 Ver. B Publish:2004.08.27 |
Page: 2/ 6 |
Loading...