GE GSD6200GWW, GSD6600GCC, GSD6600GWW, GSD6660GSS, GSD6600KBB User Manual

0 (0)
GE GSD6200GWW, GSD6600GCC, GSD6600GWW, GSD6660GSS, GSD6600KBB User Manual

GE Appliances

GSD6600/60G – GE Triton® XL Built-In Dishwasher

Built-In Dishwasher Dimensions

Installation Information

(in inches)

(in inches)

25-1/4 24 MAX.

22-1/2

27-1/2

33-13/16" MIN. adj. to 35"

21-1/4

Hot water ne on left

 

 

 

 

Countertop

 

 

 

This wall area

 

 

 

 

 

 

 

 

 

90°

 

 

must be free of

90°

 

 

pipes or wires

24"

4

4

Electrical

 

MIN.

 

 

 

 

wiring is

43" from

 

 

5

 

5

cabinet

 

 

 

 

34" to 34-3/4"

 

 

 

 

Electrical

6

 

6

wiring on

Underside

 

of countertop

 

 

 

 

right

to floor

 

Plumbing and electrical

 

 

2

 

 

 

service must enter

 

 

 

 

inside shaded area

 

 

 

19" MIN. from wall

24" From wall

 

24" MIN.

Dishwasher Rough-In Information

4 (Adjustable)

4

Electrical Rating

Voltage AC. . . . . . . . . . . . . . . . . . . . . . . 120 Hertz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Total connected load amperage. . . . . . 9.1 Calrod® heater watts max.. . . . . . . . . . 875

For use on adequately wired 120-volt, 15-amp circuit having 2-wire service with a separate ground wire. This appliance must be grounded for safe operation.

Specification Revised 6/04

Note: Dishwasher must not be installed more than 10 feet from sink for proper drainage. All plumbing and electrical work must be in accordance with local codes.

The power cord and connections must comply with the National Electrical Code Section 422 and/or local codes and ordinances. The cord must be no longer than 6 ft. from the junction box to the receptacle.

 

 

As an ENERGY STAR®

 

Listed by

partner, GE has determined

 

that this product meets the

 

Underwriters

R

ENERGY STAR guidelines

Laboratories

 

for energy efficiency.

 

 

Wood Insert Cut-Out Dimensions (flat door models only)

See Detail E for 3/4" Panel

Door insert

A

B

Detail E for 3/4 panel only

 

1-7/8

1-7/8

 

 

 

F

 

 

 

20

 

 

 

 

 

 

 

 

 

 

 

Section F-F

 

 

F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

Front View

 

Back View

 

 

 

 

 

 

 

 

 

 

 

3/8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3/4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Models/Kit

 

A

B

C – Panel Thickness

GE Models

 

 

 

 

 

 

 

GPF625 Kit*

25-1/16"

23-1/2"

 

1/4"

 

GPF675 Kit**

25-7/16"

23-3/4"

 

3/4"

 

**GPF800 Heavy Spring Kit required for custom door panel weighing more than 4 lbs.

**GPF800 Heavy Spring Kit included.

For answers to your Monogram,® GE Profileor GE appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

350378

Loading...
+ 1 hidden pages