TM
JBP95BF/KF/SF/TF–GE Profile™ 30" Free-Standing CleanDesign Electric Range
Dimensions and Installation Information (in inches)
|
30 |
|
2-1/2 |
|
25 |
Acceptable electrical |
2-1/2 |
outlet area |
|
29-7/8
7-1/2
46-1/2
Preferred electrical outlet area Roughed-in dimensions
25-3/8*
47-5/8
*Dimension from wall to front of closed oven door handle is 27-3/8”.
Specification Created 12/01
KW Rating
240V 12.4
208V 9.3
†Receptacle Locations: For 30" Free-Standing Ranges locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.
Note: Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops.
To reduce possibility of scorching of walls, it is recommended a minimum of 1-1/2" spacing be allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating element operation.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center® service, 800.626.2000.
All GE ranges |
are equipped with |
|
|
|
an Anti-Tip device. The installation |
|
Listed by |
||
of this device is an important, |
|
|||
|
Underwriters |
|||
required step in the installation |
|
|||
R |
Laboratories |
|||
of the range. |
||||
|
|