GDWT200/260R
GE® Built-In Dishwasher with Hidden Controls
Dimensions and Installation Information (in inches)
Electrical Rating
Voltage AC |
120 |
25-1/4* |
|
||
Hertz..................................................................... |
60 |
|
Total connected load amperage............. |
9.1 |
22-1/2 |
Calrod® heater watts max........................ |
875 |
For use on adequately wired 120-volt, 15-amp circuit having 2-wire service with a separate ground wire. This appliance must be grounded for safe operation.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
††Add 1/2" for deepest part of contour door. Allow an additional 2” for the handle on PDWT500/PDWT400/PDWT200 Series models.
34" MIN. adj. to 35"
21-1/4
4
24
27-1/2
4 (Adjustable)
Hot water line on left
|
|
|
This wall area |
90° |
|
|
must be free of |
|
|
pipes or wires |
|
|
24" |
4 |
4 |
MIN. |
|||
|
|
|
4 |
|
|
5 |
5 |
34" to 34-3/4" |
6 |
|
6 |
Underside |
|
||
of countertop |
|
|
|
to floor |
|
Plumbing and electrical |
|
|
2 |
||
|
|
service must enter |
|
|
|
|
inside shaded area |
19" MIN. from wall |
24" From wall |
Countertop
90°
Electrical wiring is 3" from cabinet
Electrical wiring on right
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
24" MIN.
Listed by
Underwriters
Laboratories
As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.
Specification Created 6/09 |
350208 |