Gardena V12 RL 10, V12 RS 10, V12 RL 20 User Manual

5 (1)
Gardena V12 RL 10, V12 RS 10, V12 RL 20 User Manual

GARDENA®

RL 10

Art. 2155

RL 20

Art. 2165

RS 10

Art. 2150

DGebrauchsanweisung

Rasenscheren RS 10 / RL 10, Rasenschneider RL 20

GB Operating Instructions

Grass Shears RS 10 / RL 10, Grass Cutter RL 20

FMode d’emploi

Cisailles à gazon RS 10 / RL 10, Mini-faucheuse RL 20

NL Gebruiksaanwijzing

Grasschaar RS 10 / RL 10 / RL 20

SBruksanvisning

Grässax RS 10 / RL 10 / RL 20

IIstruzioni per l’uso

Forbici per erba RS 10 / RL 10, Tagliaerba RL 20

EManual de instrucciones

Tijeras recorta-césped RS 10 / RL 10,

Tijeras cortacésped RL 20

PInstruções de manejo

Tesoura de relva RS 10 / RL 10,

Cortadora de relva RL 20

G

GARDENA

V12 Grass Shears RS 10 / RL 10, V12 Grass Cutter RL 20

Please read these instructions carefully before initial operation of your unit.

Unfold illustrated cover page to read the operating instructions.

Table of contents

1.Technical data

2.Information concerning the instructions

3.Introduction

4.Proper use

5.Initial Operation

6.Maintenance/Service/Storage

7.Advice for proper use / Safety instructions

Guarantee (p. 58)

1. Technical data

 

RS 10

RL 10

RL 20

Operation with Accu A 12

 

 

 

 

and Accu-Pack AP 12

min.

90-120

90-120

45-60

= sufficient for grass edges of

m

max. 1700

max. 1700

= sufficient for grass area

m2

100

Cutting width

mm

100

100

200

Weight (without Accu)

kg

0.6

0.9

1.6

Working area related emission

 

 

 

 

characteristic value LpA1)

dB (A)

72.2

73.2

72.2

Vibrations avhw1)

ms-2

< 2,5

< 2,5

< 2,5

1) Measuring method according to prEN 50206-1

2.Information concerning the instructions

Read these instructions carefully and observe the information contained in them. Acquaint yourself with the use of the unit, the adjustments and observe the safety instructions.

For safety reasons, chil- Adren under the age of 16 as well as people, who are not acquainted with the instructions should not use the Grass Shears / Grass Cutter.

Keep these instructions in a safe place.

3. Introduction

This unit is part of a comprehensive garden programme from GARDENA, the accu-system V12. In order to operate this product, you need additional items from the accu-system V12 range:

1.Power supply: accu-system V12

Accu A 12, Art. No. 2109, or

accu-system V12

Accu-Pack AP 12, Art. No. 2110

13

2.Charging unit: accu-system V12 Battery Charger NL12,

Art. No. 2105 (for Accu A 12 and Accu-Pack AP 12)

accu-system V12 High-Speed Battery Charger SL 60, Art. No. 2100

(only for Accu-Pack AP 12, Art. No. 2110)

4. Proper use

The GARDENA Grass Shears and Grass Cutter have been designed for cutting grass edges and small grass areas in private gardens.

These appliances are for private use only and are not designed for use in public places, parks, sports arenas, street-scapes, in agriculture or forestry.

It is absolutely necessary to observe the manufacturer’s operating instructions to ensure the unit’s proper functioning. These instructions also contain hints on service, maintenance and repair.

Attention! For safety rea- Asons the Grass Shears /

Grass Cutter should not be used for trimming hedges or for chopping material for composting.

5. Initial Operation (Fig. A-E)

5.1 How to click-in / remove the Accu (Fig. B)

Snap the Accu (11) into the attachment part (1). Make sure that the Accu has been snapped in properly. Listen for a “click” when doing this.

The Accu (11) can be released from the unit by simultaneously pressing in the two orange locking buttons (4) on the handle (5) or on the Accu-Pack if you are using the AP 12.

Please read the operating instructions of Accu A 12 / Accu-Pack AP 12.

5.2 Operation (Fig. A/A1)

Grass Shears RS 10

Simultaneously press the on/off switch (2) and the safety switch (3). The safety switch (3) can be released having started the Grass Shears. When releasing the on/off switch (2), the Grass Shears will switch off automatically.

Grass Shears RL 10 /

Grass Cutter RL 20

The unit is switched on by pressing the on/off switch (2) at the handle

(5). When releasing the on/off switch (2), the Grass Shears / Grass Cutter will switch off automatically.

The safety devices installed Aon the unit by the manufacturer must not be removed or by-passed, e. g. by binding the on/off switch to the handle, as there is risk of injury!

Do not operate the unit with an external power source!

Caution! The blades take a while to stop running after the unit has been switched off.

14

5.3Working position (Fig. C) Just hold unit at the handle (5) and push Grass Shears RS 10 / RL 10 along on its sled for grass edges

and lawn surfaces. The Grass Cutter RL 20 is equipped with wheels (8) and an additional guide handle (9) enabling ease of use.

5.4Cutting lawn edges and difficult areas (Fig. D)

For a vertical cut hold the Grass Shears RL 10 with both hands and turn the unit into cutting position. The additional guide handle on the Grass Cutter RL 20 ensures safe handling and pushing especially for a lateral cut.

Adjustment of the guide handle for RL 20 (Fig. A/C)

The guide handle can be adjusted by releasing the adjustment knob (10), and tightening, when the desired position is achieved.

5.5 Cutting Grass against walls, trees and fences (Fig. E)

Slide the Grass Shears / Grass Cutter with the outer side of the cutting blade along hard objects and surfaces.

6. Maintenance / Service / Storage

The GARDENA Grass Shears and Grass Cutter are largely main- tenance-free.

Please make sure that the contacts of the attachment part (1) and of the Accu (11) are always clean.

Grass and dirt should be removed with a dry rag or brush.

The Grass Shears / Grass Cutter should be cleaned thoroughly before and after use, and the cutting blades lubricated with a biodegradable oil. This improves the cutting performance. Never grease cutting blades!

Repairs may only be performed by GARDENA Service Centres or by dealers authorised by GARDENA.

Attention! Always remove Athe Accu before working on the Grass Shears / Grass Cutter. Risk of injury!

Due to risk of injury to persons and/or product damage, do not clean the Grass Shears / Grass Cutter under running water, especially under high pressure.

Store the Grass Shears / Grass Cutter in a dry, frost-free place. Keep out of the reach of children.

Always cover the blades with the protective sheath (7) for storage.

Observe the manufacturer’s installation hints when exchanging the cutting blades.

Exchanging the cutting blades

Only use the original GARDENA Spare Blades, Art. No. 2346.

These blades can be obtained at your GARDENA dealer or directly from the GARDENA service centre.

Never use spare parts and accessories which have not be designed by the manufacturer.

15

Loading...
+ 7 hidden pages