Frigidaire CGES3065K F-W-B User Manual

291.53 Kb


CGES3065K F/ W/ B

Signature Features

Quick Preheat


True Convection

Preheat in less than six minutes.1


Multi-rackbaking is faster and more



even with True Convection.







Quick Boil


Boils water faster with our

Easily go from warm to boil.



30" Electric

Effortless Performance

Auto Shut-OffQuick Clean Options

Effortless™ Convection Conversion Power Broil ( 4,000W )


Effortless™ Oven Rack Real Stainless Steel Even Baking Technology

Smoothtop Ceramic Glass Cooking Surface

SpaceWise™ Design


Keep Warm Drawer with SpaceWise™ Half Rack

SpaceWise™ Half Rack Keep Warm Zone ( 100W )

SpaceWise™ Expandable Element – 9" to 12" ( 1700W / 2700W )

SpaceWise™ Expandable Element – 6" to 9" ( 1600W / 3000W )


Chicken Nuggets Pizza

Keep Warm


More Easy-To-UseFeatures

Delay Start

Hidden Bake Extra-LargeWindow

Sabbath Mode (Star-K®Certified)


4.2 Cu. Ft. Oven Capacity

1.6 Cu. Ft. Drawer Capacity

Overall Exterior Dimensions







Available in:










1Based on single rack cooking performance, not set temperature, using Quick Preheat.


CGES3065K F/ W/ B 30" Electric

Slide-InRange Specifications

Product Shipping Weight (approx.) – 240 Lbs.

Single phase 3- or 4-wirecable, 120 / 240 or 120 / 208 Volt,

60 Hertz, fused on both sides of line with ground. (If local code permits, range may be connected by hard-wiring or by means of power supply cord kit.)

Connected Load (kW Rating) @ 240 / 208 Volts = 13.9 / 10.5 kW

Amps @ 240 / 208 Volts = 58 / 50 Amps

Recommended Circuit Breaker – 50 Amps (40 Amps minimum)

Always consult local and national electric codes.

Countertop MUST be level in all directions and adjustable range height at least 1/16" greater than tallest cabinet height, to ensure metal rangetop flange will fit properly on countertop edge.

Countertop Preparation

For detailed preparation instructions, refer to installation guide on the web.

Flat square-finish(flat) countertop requires no preparation since rangetop flange lays directly on countertop edge.

Formed front-edgedcountertops require front molded edge to be shaved flat 3/4" from each front corner of opening.

Tile countertops may need cut back 3/4" from each front corner of opening and /or rounded edge flattened.

For existing cutout width greater than 30-1/16"reduce the 3/4" overlap dimension or for cutout width of 29", replace actual side trim panels with smaller side trim panels, available with optional Side Trim Kit(refer to detailed kit installation instructions).

When installing optional Backguard Kit, cutout depth of 21-3/4"minimum / 22-1/8"maximum needs increased to 24".

Overhead cabinetry should not exceed a 13" maximum depth.

Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance.

Allow 24" minimum clearance between rangetop and bottom of cabinet when bottom of wood or metal cabinet is protected by not less than 1/4" flame-retardantmillboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. Allow 30" minimum clearance when cabinet is unprotected.

To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets.

Note: For planning purposes only. Refer to Product Installation Guide on the web at for detailed instructions.

Optional Accessories

Rear Filler Kit: Stainless Steel – PN # 901193-901S,White – PN #901193-9011,Black – PN #901193-9010.

Side Panel Kit: Stainless Steel – PN # 903074-901S,White – PN #903074-9011,Black – PN #903074-9010.

Backguard Kit: Stainless Steel – PN # 903046-901S,White – PN #903046-9011,Black – PN #903046-9010.

Side Trim Kit: Stainless Steel – PN # 903075-901S,White – PN #903075-9011,Black – PN #903075-9010.



CANADA 5855 Terry Fox WayMississauga, ON L5V

subject to change.

CGES3065K 01/11

© 2011 Electrolux Major Appliances