Frigidaire CFES365EC User Manual

Size:
382.24 Kb
Download

ELECTRONIC OVEN CONTROL GUIDE

NOTE: The basic timer is externally arranged in different configuration in various appliance models. This does not change the way it operates.

NOTE: Some models have a touch pad control. To activate it, you just have to touch the pad with a finger. Take care to have a good contact between the finger and the touch pad. Long nails can make the activation difficult. It is a good idea to clean the control panel after each use or as soon as possible after a spill, boil over or spatter because some ionic

or salty ingredients as ketchup, tomatoes sauce, etc. can operate the control. Before cleaning the control panel it is recommended to turn on the control lockout feature.

Control Pad Functions

READTHE INSTRUCTIONS CAREFULLY BEFORE USINGTHE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

Note: The time of daymust first be set in order to operate the oven.

CLOCK

BAKE TIME

SET PAD

PAD— Used to

Used to set

enter the length

the time of

of the baking

day.

time.

 

 

TIMER ON/OFF

 

 

PAD— Used to

 

Clock

set or cancel

 

 

 

the minute timer.

Horloge

The minute timer

 

 

does not start

 

 

 

 

or stop cooking.

 

Timer

Also, TIMER

 

 

 

ON/OFF pad is

 

On/Off

used to set the

 

 

Minuterie

 

 

 

 

Continuous Bake feature.

START TIME PAD— Used to set the desired start time for baking & Self-Clean. May be used with COOK TIMEto program a delayed bake or clean cycle.

UP and DOWN ARROW PADS— Used along

BAKE

FEATURE

 

with the function pads to select oven temperature,

PAD—Usedto

INDICATOR

 

cook time, start time (when programming an

select the bake

LIGHTS— These light

BROIL PAD

automatic start time), time of day, clean time

function.

to show which feature

Used to select

and minute timer.

 

is in use.

 

the variable broil

 

 

 

 

 

 

 

 

function.

 

 

 

 

 

Bake time

 

 

Bake

Broil

Temps de

 

 

 

 

Cuire

Griller

cuisson

 

 

 

 

 

 

 

 

Oven

 

 

 

 

Four

 

 

Start time

 

Preheat

Clear/Off

Clean

Heure de

 

Préchauffage

 

 

Annuler

Nettoyer

départ

 

Door Locked

 

 

Porte Verrouillée

Controls

 

 

 

Self-CleaningOven

 

 

 

 

 

 

 

Four Autonettoyant

 

 

OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" lightwill glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" lightwill glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" lightwill flash when the oven door locks and unlocks or when using the Self-Clean cycle or the oven door lockout is activated. The indicator light will glow constantly after the door locks.

SELECT SELFCLEAN PAD

Used to select the

Self-Cleaningcycle. A 2 or 3 hour SelfClean time may be selected.

CLEAR OFF PAD

Used to clear any function previously entered except the time of day and minute timer. Press CLEAR OFF to stop cooking. Also theCLEAR OFF pad is used to activate controls and oven door lockout setting.

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the

preheat indicator light turns OFF, your oven is ready.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for

Start time

Heure de

silent operation. Press and hold départ . After 7 seconds, the control will beep once.This will block the controls from sounding

Start time

Heure de

when a pad is pressed. To return the sound, press and hold départ again for 7 seconds until the control beeps once.

Printed in United States

318200183 (0903) Rev. B

1

To Cancel the Minute Timer before the set time has run out: Press
Timer
On/Off
Minuterie is pressed.
Timer
On/Off
Note: The indicator light located above the Minuterie pad will glow while the minute timer is active.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:

Setting Oven Controls

Note: The time of daymust first be set in order to operate the oven.

To Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

Clock

1.Press Horloge once (do not hold pad down).

2.Within 5 seconds, press and hold the oruntil the correct time of day appears in the display.Note: The clock cannot be changed during any timed bake orSelf-Cleancycle.

To Set the Minute Timer:

Timer

On/Off 1. Press Minuterie.

2. Press the to increase the time in one minute increments. Press and hold theto increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If thepad is pressed first, the timer will advance to 11 hours and 59 minutes.

3. The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in seconds.

4. When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until

While the timer is active and shows in the display, press and hold the or to increase or decrease the time.

Timer

On/Off

Minuterie .

Clock

Note: To turn thetime of day displayOFF orON in the display pressHorloge and hold for 15 seconds (the control will beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the

Clock

display is turned OFF the time of day will reappear for a few seconds any time the Horloge pad is touched.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory.The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

Broil

1.Press Griller . "——"appears in the display.

2.Press and hold the until "HI" appears in the display.

Broil

3.Press and hold Griller until °F or °C appears in the display.

4.Press the orto change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

2

To Set Control for Controls lockout
The control can be programmed to lock the oven control pads and the oven door.
To set the Lockout feature:
Clear/Off
2.
Timer
On/Off
To cancel the Continuous Bake function, press Minuterie and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12 Hour Energy Saving feature.
Press and hold down for 5 seconds until tone is heard, " The current time of day will return to the display.
1.
— — hr" will appear in display for continuous cooking.
On/Off
Minuterie
To Set Control for Continuous Bake or 12 Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
Timer
1. Press
and make sure the bake temperature is displayed.
Bake
Cuire
To Change the Oven Temperature after Baking has Started:

Setting Oven Controls (cont’d)

To Set or Change the Temperature for Baking

The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).

To Set the Controls for Baking:

Bake

1.Press Cuire . "— ——°"appears in the display.

2.Within 5 seconds, press the or. The display will show "350°F (177°C)." By pressing and holding theor, the temperature can then be adjusted in 5°F increments (1°C).

3.As soon as the orpad is released, the oven will begin heating to the selected temperature.When the displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the control will beep 3 times.

Clear/Off

4. To cancel baking, press Annuler .

2. Press the orpad to increase or decrease the set temperature.

1.Press Annuler and hold for 3 seconds. “Loc” will appear in display, the “Door Locked” indicator light will flash and the motor driven door lock will begin to close automatically.DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display.

Clear/Off

2.To cancel the Lockout feature, press Annuler and hold for 3 seconds. The control will unlock the oven door and resume normal operation.

Note: If any control pad is pressed while in the Oven Lockout mode, “Loc” will appear in the display until the control pad is released.

3

Note: During Timed Bake the preheat indicator light will not function.
To Program the Oven to Begin Baking Immediately and To Shut Off Automatically (Timed Bake):
1. Be sure that the clock shows the correct time of day. 2. Place the food in the oven.
Bake
The BAKE TIME and START TIME pads operate the features that will turn the oven ON and OFF at the times you select in advance. The oven can be programmed to start immediately and shut off automatically (Timed Bake) or to begin baking at a later time with a delayed start time (Delay Start).
Heure de départ
Temps de cuisson
Start time
Bake time
Setting Oven Controls (cont’d)
To Set the Timed Bake and Delay Start Features

3.Press Cuire . "— — — ° " appears in the display.

4.Within 5 seconds, press the or. The display will show "350°F (177°C)." By holding theor, the

temperature can then be adjusted in 5°F increments (1°C ).

Bake time

Temps de

5. Press cuisson . "0:00" will flash in the display (HR:MIN).

6. Press the oruntil the desired baking time appears in the display. 7. The oven will turn ON and begin heating.

To Program Oven for a Delayed Start Time and to Shut-OffAutomatically (Delayed Start Bake):

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

Bake

3.Press Cuire . "— — — ° " appears in the display.

4.Within 5 seconds, press the or. The display will show "350°F (177°C)." By holding theor, the

temperature can then be adjusted in 5°F increments (1°C).

Bake time

7.

Press départ

. The earliest possible start time will appear in the display.

8.

Press the

or

until the desired start time appears in the display.

9.

Once the controls are set, the control calculates the time when baking will stop in order to start at the time you have

10.

set.

 

 

The oven will turn ON at the delayed start time and begin heating.

5.

Temps de

. "0:00" will flash in the display (HR:MIN).

Press cuisson

6.

Press the

or

until the desired baking time appears.

 

Start time

 

 

 

Heure de

 

 

When the Set Bake Time Runs Out:

1. "END" will appear in the display window and the oven will shut-offautomatically.

Clear/Off

2. The control will beep 3 times every 60 seconds until Annuler is pressed.

To Change the Oven Temperature or Bake Time after Baking has Started:

1.Press the function pad you want to change.

2.Press the orto adjust the setting.

Use caution with the Timed Bake and Delayed Start features. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is completed.

4

Setting Oven Controls (cont’d)

To Set for Broiling:

1. Arrange the oven rack while oven is still cool. Position the rack as suggested in the

Broil Rack Position Table below.

Broil

2.Press Griller . "— — "will appear in display.

3.Press and hold the oruntil the desired broil setting level appears in the display. Press theforHI broil or theforLO broil. Most foods may be broiled at theHI broil setting. Select theLO broil setting to avoid excess browning or drying of foods that should be cooked to thewell-donestage.

4.For optimum browning, preheat broil element or burner for 3 - 4 minutes before adding food.

5.Place the insert on the broil pan, then place the food on the insert (See Fig. 1). DO NOT use the broil pan without the insert or cover the insert withaluminum foil. The exposed fat could ignite.

6.Be sure to center the broiler pan directly under the broiler element. GAS

MODELS: Close the oven door.ELECTRIC MODELS: Make sure the oven door is in the broil stop position(See Fig. 2).

7.Broil on one side until food is browned. Turn and broil food on 2nd side.

Note: Always pull the oven rack out to the stop position before turning or removing the food.

 

Clear/Off

8. When broiling is finished, press Annuler .

Broil Rack Position Table (Refer to Fig. 3)

 

 

Rack Position

Food category

 

 

3rd rack position

Medium-raresteaks & hamburgers

 

 

2nd rack position

Fish, medium steaks & pork chops

 

 

2nd rack position

Well-donefoods such as chicken & lobster

 

 

Should an oven fire occur, close the oven door and turn the oven OFF. If the fire continues, use a fire extinguisher.DO NOT put water or flour on the fire. Flour may be explosive.

Fig. 1

Note: The broiler pan and the insert allows grease to drain and be kept away from the high heat of the broiler.DO NOT use the pan without the insert.DO NOT cover the insert with foil; the exposed grease could ignite.

Broil Stop Position

Fig. 2

Rack positions

4

3

2

1

Fig. 3

5

Self-Cleaning

Self-CleanTime Length

For satisfactory results, use a 2 hour Self-Cleancycle forlight soils or a 3 hour cycle foraverage orheavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the SelfClean cycle. This will help eliminate the normal odors associated with theSelf-Cleancycle.

To Set the Controls for a Self-CleanCycle or a Delayed StartSelf-CleanCycle:

(Note: If you do not want to start aDelayed Self-CleanCycle, skips steps 2 & 3.)

1. Be sure the clock shows the correct time of day.

Start time

Heure de

2. Press départ . The ": " in the time of day will flash.

3. Press and hold the pad to scroll to the time to start the delayedSelf-Cleancycle. Release the pad when the desired

time is displayed.

Clean

4.Press Nettoyer . "— ——"appears in the display.

5.Press the oronce. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press. "2:00" appears in the display.

As soon as the controls are set, the motor driven lock will begin to close automatically and the "DOOR LOCK" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).

6."CLn" will appear in the display during theSelf-Cleancycle and the "DOOR LOCK" light will glow until theSelf-Cleaningcycle is complete or cancelled and the oven temperature has cooled.

When the Self-CleanCycle is Completed:

1.The time of day or "End" will appear in the display window and the “Clean” and "DOOR LOCK" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "DOOR LOCK" light has gone out, the oven door can be opened.

Clear/Off

3.If "End" is in the display and the Select Clean indicator light remains ON, pressAnnuler . The time of day will appear in the display.

NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Self-CleaningCycle

If it becomes necessary to stop or interrupt a Self-Cleaningcycle:

Clear/Off

1.Press Annuler.

2.Once the oven has cooled down for about 1 HOUR and the "DOOR LOCK" light has gone out, the oven door can be opened.

3.Restart the Self-Cleancycle once all conditions have been corrected.

To avoid possible burns use care when opening the oven door after theSelf-Cleaningcycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open.This can damage the automatic door locking system.Use caution and avoid possible burns when opening the door after theSelf-Cleaningcycle has completed. The oven may still be VERY HOT.

6

Adjusting the Oven Temperature

Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.

To Adjust Oven Temperature:

 

Bake

 

 

1.

Press Cuire .

 

 

2.

Set the temperature to 550°F (287°C) by pressing and holding the

.

 

 

Bake

 

Bake

3.

Within 2 seconds, press and hold Cuire until the 2 digit display appears. Release

Cuire . The display now indicates the

amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read "0."

4. The temperature can now be adjusted up or down 35°F or 19°C, in 5°F or 1°C steps by pressing and holding the

or . Adjust until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign(-)will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

Clear/Off

5. When you have made the desired adjustment, press Annuler to go back to the time of day display.

Note: Oven temperature adjustments made will not change theSelf-Cleaningfeature temperature.

7

Notes

8

Heure de départ
Start time
. Après 7 secondes, le tableau de commande émet un signal sonore. Le tableau de commande n’émet

GUIDE De la commande ÉLECTRONIQUE DU FOUR

NOTE: L’apparence extérieure de la minuterie peut avoir une configuration différente pour divers modèles d’appareils. Ceci ne change pas son fonctionnement.

NOTE: Certains modèles ont un panneau de contrôle à touche. Pour l’activer, vous n’avez qu’à appuyer sur une touche avec un doigt.Assurez-vousd’avoir un bon contact entre le doigt et la touche. Les longs ongles peuvent rendre

l’activation difficile. C’est une bonne idée de nettoyer le panneau de commande après chaque utilisation ou aussitôt que possible après des éclaboussures. Avant de nettoyer le panneau de commande il est recommandé d’activer la fonction verrouillage de la commande du four.

Fonctions des touches de la commande du four

LISEZ SOIGNEUSEMENT LES INSTRUCTIONS AVANT D’UTILISER LE FOUR. Pour bien utiliser votre four, habituezvous aux différentes fonctions du four décrites ci-dessous.

Note: L’horlogedoit d’abord être mise à l’heure afin de faire fonctionner le four.

 

TEMPS DE

Flèches ascendante et descendante- Sélection-

 

CUISSON— Sert à

ne la température du four, le temps de cuisson,

HORLOGE— Sert

entrer la durée du

départ différé (lors de la programmation d'un arrêt

à régler l'heure.

temps de cuisson.

automatique), l'heure, la durée du nettoyage et la

 

minuterie.

 

 

minuterie oN/ OFF— Sert à mettre en marche ou à annuler la minuterie.

La minuterie ne fait pas démarrer ni arrêter la cuisson.

Aussi, la touche minuterie oN/ OFF sert à régler la fonction cuisson continue.

Clock

Bake time

 

Temps de

 

Horloge

 

cuisson

 

 

 

 

 

Oven

 

 

Four

Timer

Start time

Preheat

On/Off

Heure de

Préchauffage

Minuterie

départ

Door Locked

 

 

Porte Verrouillée

Self-CleaningOven

Four Autonettoyant

Cuire- Sélectionne

Témoins lumineux de

la température du

 

fonction- Indique quel

mode de cuisson

 

mode est en fonction.

normale.

 

 

 

 

 

 

Griller- Sélec-

 

 

 

tionne la cuisson

 

 

 

au gril.

Bake

Broil

 

nettoyer- Sert

Cuire

Griller

 

 

 

 

à sélectionner

 

 

 

le cycle

 

 

 

autonettoyant.

Clear/Off

Clean

 

Vous pouvez

 

sélectionner un

Annuler

Nettoyer

cycle autonettoyant

 

 

 

Controls

 

 

d’une durée de 2

 

 

ou 3 heures.

 

 

 

HEURE DE DÉPART- Utilisé pour régler le temps désiré de début de cuisson ou de début de nettoyage. Peut être utilisé avec TEMPS DE CUISSONpour programmer une cuisson différée ou un nettoyage différé.

Témoins lumineux Four, Préchauffage et Porte Verrouillée - Le voyant lumineux "Four" s’allume chaque fois que le four est en fonction. Le voyant lumineux "Préchauffage" s’allume aussitôt que le four est programmé ou lorsque la température est reprogrammée à la hausse et s'éteint lorsque la température programmée est atteinte. Le voyant lumineux "Porte Verrouillée" clignote jusqu’à ce que la porte du four se verrouille lors d’un cycle autonettoyant et reste continuellement allumé une fois que la porte du four est verrouillée.

ANNULER- Annule toutes les fonctionspré-sélectionnéessauf l'heure et la minuterie. Appuyez sur cette touche pour mettre fin à la cuisson. Cette touche est aussi utilisée pour activer la caractéristique verrouillage de la commande et de la porte du four.

*Note: Le témoin lumineux FOUR sur la commande électronique s’ALLUME et s’ÉTEINT lorsque vous utilisez la caractéristique de cuisson et durant le préchauffage. Ceci est un fonctionnement normal qui indique que le four chauffe de façon intermittente pour maintenir la température de cuisson choisie. Lorsque le témoin de préchauffage est ÉTEINT, le four est prêt.

Pour un tableau de commande silencieux:

Un signal sonore se fera entendre chaque fois que vous appuyez sur une touche. Vous pouvez, si vous le désirez, programmer les commandes pour qu'elles fonctionnent sans émettre un signal sonore. Appuyez et gardez enfoncé la

Start time

Heure de

touche départ

plus de son lorsque vous appuyez sur une touche. Pour obtenir le son, appuyez de nouveau sur la touche etmaintenez-laenfoncée pendant 7 secondes jusqu’à ce que le tableau de commande émette un signal sonore.

Imprimé aux États-Unis

318200183 (0903) Rev. B

1

Timer
On/Off
Note: Le témoin lumineux situé au-dessus de la touche Minuterie s’allume pendant que la minuterie fonctionne.
Note: La minuterie ne fait pas démarrer ni arrêter la cuisson. Elle sert de minuterie additionnelle dans la cuisine et émet un signal sonore lorsque la durée programmée s’est écoulée. La minuterie peut être utilisée indépendamment ou pendant toute autre fonction du four. Lorsque la minuterie est utilisée en même temps que tout autre fonction, le décompte de la minuterie apparaît à l’écran. Pour afficher les autres fonctions, appuyez sur la touche de fonction correspondante.
Pour changer la durée de la minuterie pendant qu’elle fonctionne: Lorsque la minuterie est active et que la durée

Réglage de la commande du four

Note: Aucune commande ne fonctionne si l'horloge n'est pas réglée à l'heure.

Réglage de l'horloge

Lorsque l'appareil est branché pour la première fois, ou chaque fois que son alimentation a été interrompue, "12:00" clignote à l'écran.

Clock

1.Appuyez sur Horloge une fois (ne maintenez pas la touche enfoncée).

2.Dans les 5 secondes qui suivent, appuyez sur la touche ouetmaintenez-laenfoncée jusqu’à ce que l’heure juste paraisse à l’écran.

Note: L’horloge ne peut pas être réglée pendant un cycle de cuisson minutée ou un cycle autonettoyant.

Réglage de la minuterie

Timer

On/Off

1. Appuyez sur Minuterie .

2. Appuyez sur pour augmenter le temps par intervalle de 1 minute. Appuyez sur la toucheetretenez-lapour faire avancer le temps par intervalle de 10 minutes. La minuterie peut être réglée pour n'importe quel laps de temps, de 1 minute à 11 heures et 59 minutes.

Note: Si vous appuyez d’abord sur, la minuterie indiquera 11 heures et 59 minutes.

3. L’écran indique le compte à rebours en minutes jusqu’à ce qu’il ne reste qu’une minute. Ensuite, le compte à rebours s’affiche en secondes.

4. Lorsque la durée programmée s’est écoulée, la minuterie émet 3 bips. Elle continue à émettre 3 bips toutes les 60

Timer

On/Off

secondes jusqu’à ce que vous appuyiez sur Minuterie .

est affichée, appuyez sur la touche ouetmaintenez-laenfoncée pour augmenter ou diminuer la durée programmée.

Timer

On/Off

Pour arrêter la minuterie avant que le temps réglé soit écoulé: Appuyez sur Minuterie .

Clock

Note: PourÉTEINDRE ouALLUMER l’affichage de l’heure, appuyez sur la toucheHorloge etmaintenez-laenfoncée pendant 15 secondes (le commande du four émet un bip), puis relâchez la touche. Cette fonction n’efface pas l’heure de la mémoire de la commande du four. Lorsque l’affichage est ÉTEINT, l’heure réapparaît pendant quelques

Clock

secondes chaque fois que vous appuyez sur Horloge .

Conversion de la température

La commande électronique du four est réglée pour fonctionner en °F (Fahrenheit) lorsqu’elle quitte l’usine. Le four peut être programmé pour toute température entre 170°F et 550°F (77°C et 287°C).

Pour changer la température en °C (Celsius) ou de °C à °F (la commande ne doit pas être en mode de cuisson ou de nettoyage):

Broil

1.Appuyez sur Griller . "——"apparaît à l'écran.

2.Appuyez sur la touche etmaintenez-laenfoncée jusqu’à ce que "HI" apparaisse à l’écran.

Broil

3.Appuyez sur la touche Griller etmaintenez-laenfoncée jusqu’à ce que °F ou °C apparaisse à l’écran.

4.Appuyez sur oupour passer de °F à °C ou de °C à °F.

5.Appuyez sur n’importe quelle touche pour retourner au mode de fonctionnement normal.

2