Frigidaire 5-10 User Manual

Size:
1.35 Mb
Download

USE & CARE MANUAL

Contents

2Warranty

3Product Registration

3Packaging

3Normal Sounds

4Important Safety Instructions

4Operation of Current Device

5-10Air Conditioner Features

10 Care and Cleaning

10 Energy Saving Ideas

11 Avoid Service Checklist

NOTE: This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as instructed in this USE & CARE MANUAL instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.

READ AND SAVE THESE INSTRUCTIONS

THRU-THE-WALL

ELECTRONIC CONTROL AIR CONDITIONER

P/N 66121618

ROOM AIR CONDITIONER WARRANTY

Your product is protected by this warranty

Your appliance is warranted by Electrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.

 

WARRANTY

FRIGIDAIRE, THROUGH ITS AUTHORIZED

 

 

THE CONSUMER WILL BE

 

PERIOD

SERVICERS, WILL:

 

 

 

RESPONSIBLE FOR:

 

 

 

 

FULL ONE-YEAR

O n e y e a r f r o m

Pay all costs for repairing or replacing parts of

Costs of service calls that are listed under

WARRANTY

original purchase

this appliance which prove to be defective in

NORMAL RESPONSIBILITIES OF THE

 

date.

materials or workmanship.

 

CONSUMER.*

 

 

 

 

 

 

LIMITED 2-5

Second through fifth

Repair or replace any parts in the Sealed

D i a g n o s t i c c o s t s

a n d a n y r e m o v a l ,

years from original

Refrigeration System

(compressor,

condenser,

transportation and

reinstallation costs

YEAR

purchase date.

evaporator and tubing)

proves to be

defective in

which

are

required

because of service.

WARRANTY

 

materials or workmanship.

 

Costs

for

labor, parts and transportation

(Sealed System)

 

 

 

 

 

 

other than with respect to the Sealed

 

 

 

 

 

 

 

 

 

 

Refrigeration System.

 

 

 

 

 

 

 

 

 

 

*NORMAL

This warranty applies only to products in ordinary household use, and the consumer is responsible for

RESPONSIBILITIES

the items listed below.

OF THE CONSUMER

1.

Proper use of the appliance in accordance with instructions provided with the product.

 

2.

Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in

 

 

accordance with all local plumbing, electrical and/or gas codes.

 

3.

Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose

 

 

connections or defects in house wiring.

 

4.

Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which

 

 

are not a part of the appliance when it was shipped from the factory.

 

5.

Damages to finish after installation.

 

6.

Damage to unit after removal from packaging carton.

EXCLUSIONS

This warranty does not cover the following:

 

1.

CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES

 

 

RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.

 

 

Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or

 

 

exclusion may not apply to you.

 

2.

Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary

 

 

household use. The consumer shall pay for such service calls.

 

3.

Damages caused by services performed by persons other than authorized Frigidaire servicers; use of parts other than

 

 

Frigidaire Genuine Renewal Parts; obtained from persons other than such servicers; or external causes such as

 

 

abuse, misuse, inadequate power supply or acts of God.

 

4.

Products with original serial numbers that have been removed or altered and cannot be readily determined.

IF YOU NEED SERVICE Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order:

1.Contact Frigidaire Consumer Services or an authorized Frigidaire servicer.

2.If there is a question as to where to obtain service, contact our Consumer Relations Department at:

Frigidaire Company

CANADA

Electrolux Canada Group

P.O. Box 212378

6150 McLaughlin Road

Augusta, GA 30917

Mississauga, Ontario L5R 4C2

800-444-4944

1-866-213-9397

Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by Electrolux. This warranty applies only in the 50 states of the U.S.A., Puerto Rico and Canada.

FOR SERVICE CALL 1-800-444-4944

2

Product Registration Record Your Model and Serial Numbers

Record in the space provided below the model and serial numbers. On all models,

the serial plate is located on the outside of the cabinet.

Model No.

Serial No.

Register Your Product

The self-addressedPRODUCT REGISTRATION CARD should be filled in

completely, signed and returned to the Frigidaire Company.

Normal Sounds

High Pitched Chatter

Today's high efficient compressors may have a high pitched chatter during the cooling cycle.

Sound of Rushing Air

At the front of the unit, you may hear the sound of rushing air being moved by the fan.

Gurgle/Hiss

“Gurgling or hissing” noise may be heard due to refrigerant passing through evaporation during normal operation.

Vibration

Unit may vibrate and make noise because of poor wall or window construction or incorrect installation.

Pinging or Swishing

Droplets of water hitting condenser during normal

operation may cause “pinging or swishing” sounds.

3

Important Safety

Instructions

NOTE The power supply cord with this air conditioner contains a current detection device designed to reduce the risk of fire.

P l e a s e r e f e r t o t h e s e c t i o n “Operation of Current Device” for details.

In the event that the power supply cord is damaged, it cannot be repaired it must be replaced with a cord from the Product Manufacturer.

WARNING Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.

Grounding type wall receptacle

Do not, under

any circumstances, cut, remove,

or bypass the grounding prong.

Power supply cord with 3-prong grounding plug and current detection device

Read all instructions before using this air conditioner.

WARNING For Your Safety

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings.

WARNING Prevent Accidents

To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions, including the following:

Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located either on the side of the cabinet or behind the grille.

If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass first. If the window is a triple-tracktype with a screen panel included, remove the screen completely before installation.

Be sure the air conditioner has been securely and correctly installed according to the separate installation instructions provided with this manual. Save this manual and the installation instructions for possible future use in removing or reinstalling this unit.

When handling the air conditioner , be careful to avoid cuts from sharp metal fins on front and rear coils.

WARNING Electrical Information

The complete electrical rating of your new room air conditioner is stated on the serial plate. Refer to the rating when checking the electrical requirements.

Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-pronggrounding plug for protection against shock hazards.

Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.

Do not run air conditioner with outside protective cover in place. This could result in mechanical damage within the air conditioner.

Do not use an extension cord or an adapter plug.

READ THIS SECTION BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER.

Operation of Current

Device

Plug in &

Press RESET

RESET

TEST

NOTE:Some plugs have Buttons on the side

The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following:

1.Plug in the Air Conditioner.

2.The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out.

3.Press the RESET button. Again you will notice a click as the button engages.

4.The power supply cord is now supplying electricity to the unit.

NOTE:

Do not use this device to turn the unit on or off.

Always make sure the RESET button is pushed in for correct operation.

The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or it cannot be reset. A new one can be obtained from the product manufacturer.

If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from the product manufacturer.

4

Air Conditioner

Features

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions. Then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote.

RAISES

TEMPERATURE

OR TIME

Temp/Timer

Auto Temp

Hi

SETS FAN SPEED

Med

 

Lo

Sleep Check

Filter

 

Heat

 

Fan

Cool

 

 

 

Speed

Energy Saver

 

LOWERS

Fan Only

Temp/Timer

 

 

 

TEMPERATURE

 

Remote

OR TIME

 

Sensing

 

 

Mode

Timer

SETS MODE

TIMER

DISPLAYS TEMPERATURE/TIME

TURNS UNIT

ON OR OFF

REMOTE TEMP SENSING INDICATOR (SOME MODELS)

4

TURNS UNIT ON OR OFF

ADJUSTS TEMPERATURE OR TIME

Fan Slower

Temp/Timer

Faster Fan

Temp/Timer

SETS

Cool

Energy

Fan

MODE

 

Saver

Only

 

Sleep

Auto

Timer

 

 

Temp

 

 

Start

 

Stop

ACTIVATES REMOTE

 

Remote

 

THERMOSTAT

 

Sensing

 

 

 

 

some models

 

 

 

LIGHT

TURNS UNIT

ON OR OFF

 

SETS FAN

SPEED

ADJUSTS

TEMPERATURE

OR TIME

SETS

MODE

ACTIVATES

HEAT MODE

TIMER

 

Fan Slower

Temp/Timer

Faster Fan

Temp/Timer

Cool Energy Fan

Saver Only

Sleep Auto Timer

Temp

Heat

LIGHT

SETS FAN

SPEED

ACTIVATES TIMER

REMOTE CONTROL

REMOTE CONTROL FOR

w/DISPLAY & REMOTE

HEAT MODELS

SENSING BUTTON

 

Batter Size: AAA

WARRING: Do not Mix Old And New Batteries. Do Not Mix Alkaline, Standare (Carbon-Zinc).Or Rechargeable(Nichel-Cadmium)Batteries.

5

Air Conditioner Features (continued)

TO TURN UNIT ON:

YOU WILL SEE:

Temp/Timer

 

Auto Temp

 

 

DO THIS:

 

Hi

 

 

 

Med

 

 

 

 

Lo

 

 

 

 

 

 

Sleep

Check

 

 

 

Filter

 

 

 

 

 

Heat

 

 

PRESS ON/OFF

Fan

Cool

 

 

Speed Energy Saver

 

 

BUTTON

 

Fan Only

Temp/Timer

 

Remote

Sensing

Mode

Timer

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

TO CHANGE

YOU WILL SEE:

TEMPERATURE SETTING:

 

 

Temp/Timer

 

 

 

Auto Temp

 

 

DO THIS:

 

Med

 

 

 

Hi

 

 

 

 

Lo

 

 

 

 

 

 

Sleep

Check

 

 

 

Filter

 

 

 

 

 

Cool

 

 

PRESS TO RAISE

 

Heat

 

 

 

Fan

 

 

 

 

Speed Energy Saver

 

 

 

 

Fan Only

Temp/Timer

 

 

 

 

 

PRESS TO LOWER

 

 

 

Remote

 

 

 

 

 

 

 

Sensing

 

Mode

 

 

 

 

 

 

Timer

 

 

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

Note: Tap or hold either up(^) or down(v) button until the desired temperature is seen on display. This temperature will be automatically maintained anywhere between 60F (16°C) and 90F (32°C) for cooling mode. The Temperature will be automatically maintained anywhere between 55F (13°C) and 80F (27°C) for heating mode. If you want the display to read the actual room temperature, "FAN SEE ONLY MODE".

TO CHANGE FAN SPEEDS:

YOU WILL SEE THE

SPEED CHOSEN:

LIGHT ON

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

DO THIS:

PRESS FAN SPEED

BUTTON

SELECT SPEED

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

TO USE AUTO TEMP FEATURE:

 

LIGHT ON

YOU WILL SEE:

 

Auto Temp

Temp/Timer

DO THIS:

 

Auto Temp

Temp/Timer

 

 

 

 

 

 

Hi

 

 

 

Hi

 

 

Med

Sleep Check

PRESS FAN

 

Med

Sleep Check

 

Lo

 

Lo

 

 

Filter

SPEED BUTTON

 

 

Filter

 

Heat

 

 

Heat

 

Fan

Cool

 

 

Fan

Cool

 

 

 

 

 

 

Speed Energy Saver

 

 

Speed

Energy Saver

 

 

Fan Only

Temp/Timer

SELECT

 

Fan Only

Temp/Timer

 

 

 

 

 

 

Remote

AUTO FAN

 

 

Remote

 

 

Sensing

 

 

Sensing

Mode

 

 

 

Mode

 

 

 

 

Timer

 

 

 

Timer

Note: The fan speed will begin in HI, then adjust to MED and LO as the room temperature conditions indictates. For example in cooling, if the room doesn't get too warm it will stay at LO. If the room temperature rises quickly, such as a door being opened, it will automatically go to HI speed. The fan speeds will adjust back to LO as the room returns to the original set temperature.

6

Air Conditioner Features

(continued)

TO OPERATE ON FAN ONLY:

YOU WILL SEE:

 

LIGHT ON

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

DO THIS:

PRESS

MODE BUTTON

CHOOSE

FAN ONLY

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

Note: Use this function only when cooling is not desired, such as for room air circulation. You can choose any fan speed you prefer,EXCEPT AUTO FAN.

During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.

Fan Only cannot be selected when the unit is in the 'Remote Sensing' Mode. (On those units with that feature).

TO USE THE

 

 

 

 

 

 

ENERGY SAVER FEATURE:

LIGHT ON

 

YOU WILL SEE:

 

 

 

 

 

 

 

 

 

Temp/Timer

 

DO THIS:

 

 

Temp/Timer

 

 

Auto Temp

 

 

 

 

Auto Temp

 

 

 

Hi

 

 

 

 

Hi

 

 

 

Med

 

 

 

 

Med

 

 

 

Lo

 

 

 

 

Lo

 

 

 

 

Sleep

Check

PRESS

 

 

Sleep

Check

 

 

Filter

 

 

 

Filter

 

 

 

 

 

 

 

 

Heat

 

 

MODE BUTTON

 

Heat

 

 

Fan

Cool

 

 

Fan

Cool

 

 

Speed Energy Saver

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

Fan Only

Temp/Timer

 

 

 

 

 

 

 

 

 

 

Remote

 

CHOOSE

 

 

Remote

 

 

 

Sensing

 

ENERGY SAVER

 

 

Sensing

 

Mode

 

 

 

Mode

 

 

 

 

 

Timer

 

 

 

 

Timer

 

Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the unit cooling system starts again.

TIMER-DELAY

 

 

 

YOU WILL SEE

 

START/STOP FEATURE:

FIRST

 

THE TIME CHOSEN:

 

 

 

 

DO THIS:

 

 

 

 

 

Auto Temp

Temp/Timer

 

PRESS TIMER

 

Auto Temp

Temp/Timer

 

 

Med

 

 

BUTTON

 

Med

 

 

 

Hi

 

 

 

 

Hi

 

 

 

Lo

 

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

 

Sleep

Check

 

 

Filter

 

 

 

Filter

 

 

 

 

 

 

 

 

Heat

 

 

THEN

 

Heat

 

 

Fan

Cool

 

 

Fan

Cool

 

 

 

 

 

 

 

 

 

Speed Energy Saver

 

 

DO THIS:

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

Fan Only

Temp/Timer

 

 

 

 

PRESS TEMP/TIMER

 

 

 

 

 

Remote

 

 

 

Remote

 

 

 

Sensing

 

 

 

 

Sensing

 

Mode

 

 

 

BUTTON

Mode

 

 

 

 

 

Timer

 

 

 

Timer

 

LIGHT ON

Note 1: For Delay Stop, the unit must be in the ON position.

Note 2: For Delay Start, the unit must be in the OFF position.

To adjust timer setting, tap or hold the UP arrow (

V

) or DOWN arrow (v) to change the delay time by .5 hour increments up to

 

 

10 hours, then by 1 hour increments up to 24 hours. The control will count down the timer remaining until start (8, 7.5, 7, etc.). The Delay Start mode automatically selects cooling with maximum Fan Speed. The temperature maintained will be the same as previously set. To change the set temperature, press “COOL” then Up or Down arrows until the desired temperature is indicated on the display. After 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop. Turning the unit “ON” or “OFF” at any timer will cancel the Delay Start/Stop function. The delay Start/Stop feature will work until the unit either starts or stops. Once this has happened then the above steps have to be repeated again.

7

Air Conditioner Features(continued)

LIGHT ON

SLEEP FEATURE:

YOU WILL SEE:

Temp/Timer

 

Auto Temp

 

 

 

 

Hi

 

 

DO THIS:

 

Med

 

 

 

Lo

 

 

 

 

 

 

Sleep

Check

 

 

 

Filter

 

 

 

 

 

Heat

 

 

PRESS

Fan

Cool

 

 

 

 

 

 

Speed Energy Saver

 

 

SLEEP PAD

 

Fan Only

Temp/Timer

 

 

 

 

Remote

 

 

 

 

Sensing

 

Mode

 

 

 

 

 

 

Timer

 

 

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

The Sleep Mode can be selected with a Heating or Cooling Mode. Note: In this “MODE” the selected cooling temperature will increase by 2 degrees F, 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees F, after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. If this Mode is selected with Heat, the set temperature will Decrease at the same time pattern. This ends the “Sleep” MODE and the unit will continue to operate as originally programmed. The “Sleep” MODE program can be cancelled at any time during operation by pressing “Sleep” MODE button.

CHECK FILTER FEATURE:

LIGHT ON

YOU WILL SEE:

 

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

DO THIS:

PRESS TO RESET

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the “Clean Filter” button and the light will go off.

REMOTE SENSING FEATURE (on some models)

YOU WILL SEE:

Fan Slower

Temp/Timer

 

 

FanFaster

Temp/Timer

Cool

Energy

Fan

 

Saver

Only

Sleep

Auto

Timer

 

Temp

 

Start

 

Stop

 

Remote

 

 

Sensing

 

LIGHT Pulsing On

 

Temp/Timer

Auto Temp

 

& Off Intermittently

Med

 

 

Hi

 

 

Lo

 

 

 

Sleep

 

Heat

 

Fan

Cool

 

 

 

Speed

Energy Saver

 

 

Fan Only

Temp/Timer

DO THIS:

 

 

Remote

 

 

Sensing

Mode

 

 

PRESS SENSING

 

Timer

START BUTTON

 

 

Note: unit display show “set” temperature

Note: This feature can be activated from the remote control ONLY.

Temp/Timer

FanSlower

 

FanFaster

Temp/Timer

Check

 

 

Filter

 

 

Cool

Energy

Fan

 

Saver

Only

Sleep

Auto

Timer

 

Temp

 

Start

 

Stop

 

Remote

 

 

Sensing

 

Note: remote display is actual temperature at remote control only

To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing start button.

The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will pulse each

time it sends a signal. It will continue to send this signal until the feature is deactivated by pressing the remote sensing stop

button. If the unit does not receive the remote sensing signal during any 3 minute interval, the unit will keep to indicate the

remote sensing mode has ended. The display on the remote control indicates the temperature at the remote ONLY. The unit

display indicates the set temperature.

8

Air Conditioner Features

(continued)

HEATING FEATURE (on some models):

YOU WILL SEE:

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

DO THIS:

PRESS

MODE BUTTON

SELECT HEAT

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

Note: This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes. When in the “Heat” Mode, the fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 55°F (13°C) and 80°F (27°C). When the room set temperature is satisfied, the fan will cycle off and on to circulate and sample the room air.

TO TURN UNIT OFF:

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

FAULT CODES

T e m p /T i m e r

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

C h e c k

 

 

S l e e p

 

 

F i l t e r

 

 

 

 

Heat

 

 

F a n

C ool

 

 

S p e e d

E nergy S aver

 

 

 

Fan Only

T e m p /T i m e r

 

 

 

 

R emo te

S ens ing

M o d e

T i m e r

If the display reads “AS”, a sensor has failed. Contact your Authorized Frigidaire Service Center

DO THIS:

PRESS

ON/OFF BUTTOT

T e m p /T i m e r

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

C h e c k

 

 

S l e e p

 

 

F i l t e r

 

 

 

 

Heat

 

 

F a n

C ool

 

 

S p e e d

E nergy S aver

 

 

 

Fan Only

T e m p /T i m e r

 

 

 

 

R emo te

S ens ing

M o d e

T i m e r

If the display reads “HS”, a sensor has failed. Contact your Authorized Frigidaire Service Center

YOU WILL SEE:

Temp/Timer

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

 

 

 

Sleep

Check

 

 

Filter

 

 

 

 

Heat

 

 

Fan

Cool

 

 

 

 

 

Speed Energy Saver

 

 

 

Fan Only

Temp/Timer

 

 

 

 

Remote

Sensing

Mode

Timer

T e m p /T i m e r

 

Auto Temp

 

 

 

Hi

 

 

 

Med

 

 

 

Lo

 

C h e c k

 

 

S l e e p

 

 

F i l t e r

 

 

 

 

Heat

 

 

F a n

C ool

 

 

S p e e d

E nergy S aver

 

 

 

Fan Only

T e m p /T i m e r

 

 

 

 

R emo te

S ens ing

M o d e

T i m e r

If the display reads “ES”, a sensor has failed. Contact your Authorized Frigidaire Service Center

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should know.

 

The Remote Control will operate all the control panel features, follow the same instructions.

 

 

!

The "Cool "circuit has an automatic3 minute time delayed start if the unit is turned off

!

 

and on quickly. This prevents overheating of the compressor and possible circuit

breaker tripping. The fan will continue to run during this time.

The control will maintain any set temperature between 60F and 90F degrees (cooling), 55F and 80F (heating).

The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other, press and hold the Up and Down Temperature Selection Pads at the same time for 3 seconds.

9

Air Conditioner Features (continued)

4-WayAir Directional Louvers

The 4-Wayair directional louvers allow you to direct air flow up or down, left or right throughout the room as needed. To adjust the air directional louvers sideto- side, use the center handle as you move itside-to-side.

(4-WAY)

Care and Cleaning

Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards.

Air Filter Cleaning

The air filter should be checked at least once a month to see if cleaning is necessary. Trapped particles in the filter can build up and cause an accumulation of frost on the cooling coils.

Grasp the filter by the center and pull up and out.

Wash the filter using liquid dishwashing detergent and warm water. Rinse filter thoroughly. Gently shake excess water from the filter. Be sure filter is thoroughly dry before replacing.

Or, instead of washing you may vacuum the filter clean.

Cabinet Cleaning

Be sure to unplug the air conditioner to prevent shock or fire hazard. The cabinet and front may be dusted with an oil-freecloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent. Rinse thoroughly and wipe dry.

Never use harsh cleaners, wax or polish on the cabinet front.

Be sure to wring excess water from the cloth before wiping around the controls. Excess water in or around the controls may cause damage to the air conditioner.

Plug in air conditioner.

Winter Storage

If you plan to store the air conditioner for the winter, cover it with plastic or return it to the original carton.

NOTE: To prevent rust or electrical connections from being damaged, store air conditioner in an upright position and a dry place.

Energy Saving Ideas

 

Do not block air flow inside with blinds, curtains or furniture; or

 

 

outside with shrubs, enclosures, or other buildings.

 

The capacity of the room air conditioner must fit the room size for efficient

 

 

and satisfactory operation.

 

Install the room air conditioner on the shady side of your home. A window

 

 

that faces north is best because it is shaded most of the day.

 

Close the fireplace damper, floor and wall registers so cool air does not

 

 

escape up the chimney and into the duct work.

 

 

Keep blinds and drapes in other windows closed during the sunniest part of

 

 

the day.

 

Clean the air filter as recommended in the section “Care and Cleaning.”

 

Proper insulation and weather stripping in your home will help keep warm

 

 

air out and cool air in.

 

 

External house shading with trees, plants or awnings will help reduce the

 

 

air conditioner's work load.

Operate heat producing appliances such as ranges, washers, dryers and dishwashers during the coolest part of the day.

10