Frigidaire 318203860 User Manual

Size:
4.08 Mb
Download

Electric Range

 

Drop-in /Slide-in

 

Welcome ..................................

2

Models Important Safety Instructions ..3-5

Features at a Glance .............

6

Setting Surface Controls....

7-13

Surface Cooking ..................

14

Before Setting

 

Oven Controls .................

14-15

Setting Oven Controls .........

15

Setting Warmer Drawer Control ...

16-17

Cooking Informations .....

18-19

Care & Cleaning ..............

20-27

Adjusting Your

 

Oven Temperature ................

27

Before You Call

 

Solutions to

 

Common...........................................Problems

28-29

Warranty ................................

30

318203860 (0507) Rev. A

Welcome & Congratulations

Questions? 1-800-944-9044

(United States)

1-866-294-9911

(Canada)

Please attach sales receipt here for future reference.

©2005 Electrolux Canada Corp. All rights reserved

Printed in United States

Congratulations on your purchase of a new appliance! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible.Your satisfaction is our number one priority.

We know you’ll enjoy your new appliance and ThankYou for choosing our product. We hope you consider us for future purchases.

PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual contains general operating instructions for your appliance and feature information for several models. Your product may not have all the described features. The graphics shown are representative.The graphics on your appliance may not look exactly like those shown. These instructions are not meant to cover every possible condition and situation that may occur. Common sense and caution must be practiced when installing, operating and maintaining any appliance.

Please record your model and serial numbers below for future reference.

Model Number:

Serial Number:

Purchase Date:

Product Registration

Register Your Product

The PRODUCT REGISTRATION CARDshould be filled in completely, signed and returned to Electrolux Home Products.

Serial Plate Location

Serial Plate

Location

Storage drawer (some models only)

2

Important Safety Instructions

Read all instructions before using this appliance. Save these instructions for future reference.

This guide contains important safety symbols and instructions. Please pay special attention to these symbols and follow all instructions given. Here is a brief explanation of these symbols.

This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.

This symbol will help alert you to situations that may cause bodily injury or property damage.

SLIDE-INMODELS ONLY

 

 

 

 

 

 

 

To reduce

 

 

 

• All ranges

 

the risk of tipping of the

 

 

 

can tip.

 

range, the range must be

 

 

 

• Injury to per-

 

secured by properly in-

 

 

 

sons could

 

stalled anti-tipbracket(s)

 

 

 

result.

 

provided with the range.To

 

 

 

• Install anti-tip

 

check if the bracket (s) is

 

 

 

device

 

installed properly, remove

 

 

 

packed with

 

the lower panel or storage

 

 

 

range.

 

drawer and verify that the

 

 

 

• See Installa-

 

anti-tipbracket (s) is

 

 

 

 

 

 

 

tion instruc-

 

engaged. Refer to the

 

 

 

tions.

 

installation instructions for

 

 

 

 

 

 

proper anti-tipbracket(s).

 

 

 

 

 

 

 

 

Remove all tape and packaging wrap before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow children to play with packaging material.

Proper Installation—Besure your appliance is properly installed and grounded by a qualified technician in accordance in the United States with National Electrical Code ANSI/NFPA No.70—latestedition and local code requirements, and in Canada with CSA C22.1 PART1—latestedition and local code requirements.Install only per installation instructions provided in the literature package for this appliance.

Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the electrical power to the range at the circuit breaker or fuse box in case of an emergency.

User Servicing—Donot repair or replace any part of the appliance unless specifically recommended in the manuals.All other servicing should be done only by a qualified technician to reduce the risk of personal injury and damage to the appliance.

Never modify or alter the construction of a range by removing leveling legs, panels, wire covers, anti-tipbrackets/screws, or any other part of the product.

DROP-INMODELS ONLY

 

 

 

 

 

 

 

 

To reduce

 

 

 

• All ranges

the risk of tipping of the

 

 

 

can tip.

range, the range must be

 

 

 

• Injury to per-

secured by properly in-

 

 

 

sons could

stalled anti-tipscrews

 

 

 

result.

provided with the range.

 

 

 

• Install anti-tip

To check if the screws are

 

 

 

device

installed

properly, raise

 

 

 

packed with

the lift-upcooktop and

 

 

 

range.

verify that the anti-tip

 

 

 

• See Installa-

screws

are

engaged.

 

 

 

 

 

 

tion Instruc-

Refer to

the

installation

 

 

 

tions.

instructions

for proper

 

 

 

 

 

anti-tipscrew installation.

 

 

 

 

 

 

 

 

 

Stepping, leaning or sitting on the door or drawer of this appliance can result in serious injuries and may also cause damage to the appliance.Do not allow children to climb or play around the appliance. The weight of a child on an open door may cause the appliance to tip, resulting in serious burns or other injury. An open drawer, when hot, may cause burns.

Do not use the oven or warmer drawer (if equipped) for storage.

Storage in or on Appliance—Flammablematerials should not be stored in an oven, near surface units or in the drawer (if equipped).This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance. Flammable materials may explode and result in fire or property damage.

Do not store items of interest to children in the cabinets above the appliance.Children climbing on the range to reach items could be seriously injured.

Do not leave children alone. Children should not be left alone or unattended in the area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

3

Important Safety Instructions

DO NOT TOUCH SURFACE UNITS, AREAS NEAR THESE UNITS, OVEN HEATING ELEMENTS OR INTERIOR SURFACES OF THE OVEN OR WARMER DRAWER (if equipped). Both surface units and oven heating elements may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cooktop, surfaces facing the cooktop, the oven vent openings and surfaces near these openings, oven door and window.

Wear Proper Apparel—Loose-fittingor hanging garments should never be worn while using the appliance.Do not let clothing or other flammable materials contact hot surfaces.

Never use your appliance for warming or heating the room.

Do Not Use Water or Flour on Grease Fires—Smotherthe fire with a pan lid, or use baking soda, a dry chemical orfoam-typeextinguisher.

When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.

Use Only Dry Potholders—Moistor damp potholders on hot surfaces may result in burns from steam.Do not let the potholders touch hot heating surface units or interior oven elements. Do not use a towel or other bulky cloth instead of a potholder.

Do Not Heat Unopened Food Containers—Buildup of pressure may cause the container to burst and result in injury.

Remove the oven door from any unused appliance if it is to be stored or discarded.

IMPORTANT—Donot attempt to operate the oven during a power failure. If the power fails, always turn the oven off.If the oven is not turned off and the power resumes, the oven may begin to operate again. Food left unattended could catch fire or spoil.

Electronic controllers can be damaged by cold temperatures.When you use your appliance for the first time, or if it has not been used for a long period of time, make sure that it has been exposed to a temperature above 0°C/32°F for at least 3 hours before connecting it to the power supply.

IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP

Know which knob controls each surface heating unit.

Use Proper Pan Size—Thisappliance is equipped with one or more surface units of different sizes. Select utensils having flat bottoms large enough to cover the surface unit. The use of undersized utensils will expose a portion of the surface heating unit to direct contact and may result in ignition of clothing. Proper relationship of utensil to the surface unit will also improve efficiency.

Utensil Handles Should BeTurned Inward and Should Not Extend Over Adjacent Surface Units—To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil. The handle of the utensil should be positioned so that it is turned inward, and does not extend over adjacent surface unit.

Never Leave Surface Units Unattended—Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt.

Protective liners— Do not use aluminum foil to line oven bottom or any other part of the appliance. Only use aluminum foil as recommended for baking if used as a cover placed on the food. Any other used of protective liners or aluminum foil may result in a risk of electric shock or fire or a short circuit.

Glazed Cooking Utensils—Onlycertain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for rangetop service without breaking due to the sudden change in temperature. Check the manufacturer's recommendations for rangetop use.

Do Not Use Decorative Surface Element Covers. If an element is accidentally turned on, the decorative cover will become hot and possibly melt. Burns will occur if the hot covers are touched. Damage may also be done to the cooktop.

FOR GLASS COOKTOPS ONLY

Do Not Clean or Operate a Broken Cooktop If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.

Clean Cooktop Glass with Caution—If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid a steam burn. Some cleaners can produce harmful fumes if applied to a hot surface.

4

Important Safety Instructions

Avoid scratching the cooktop glass with sharp objects.

IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN

Use Care When Opening Door or Warmer Drawer (if equipped)—Stand to the side of the appliance when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven/ warmer drawer.

Keep Oven Vent Ducts Unobstructed. The oven is vented at the front above the oven door. Touching the surfaces in this area when the oven is operating may cause severe burns. Also, do not place plastic or heatsensitive items on or near the oven vent. These items could melt or ignite.

Placement of Oven/Warmer Drawer (if equipped) Racks. Always place oven racks in desired location while oven/drawer (if equipped) is cool. Remove all utensils from the rack before removing rack. If rack must be moved while oven is hot, use extreme caution. Use potholders and grasp the rack with both hands to reposition. Do not let potholders contact the hot oven element or interior of the oven/warmer drawer (if equipped).

Do not use the broiler pan without its insert. The broiler pan and grid allow dripping fat to drain and be kept away from the high heat of the broiler.

Do not cover the broiler or warmer drawer (if equipped) grid with aluminum foil. Exposed fat and grease could ignite.

Do not touch a hot light bulb with a damp cloth. Doing so could cause the bulb to break. Disconnect the appliance or turn off the power to the appliance before removing and replacing light bulb.

SELF-CLEANINGOVENS:

Clean in the self-cleaningcycle only the parts of the oven listed in this owner's guide.Before self-cleaning the oven, remove the broiler pan and any utensils stored in the oven.

Do not clean the oven door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

Oven racks. Oven racks color will change if left in the oven during aself-cleaningcycle.

Do not use oven cleaners. No oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.

Remove oven racks. Oven racks color will change if left in the oven during aself-cleaningcycle.

The health of some birds is extremely sensitive to the fumes given off during theself-cleancycle of any range. Move birds to another well ventilated room.

SAVETHESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS FOR CLEANING YOUR RANGE

Clean the range regularly to keep all parts free of grease that could catch fire. Exhaust fan ventilation hoods and grease filters should be kept clean. Do not allow grease to accumulate. Greasy deposits in the fan could catch fire. Refer to the hood manufacturer's instructions for cleaning.

Cleaners/aerosols—Alwaysfollow the manufacturer's recommended directions for use. Be aware that excess residue from cleaners and aerosols may ignite causing damage and/or injury.

5

Features At A Glance

 

 

 

Right rear

 

Left front

Left rear control

Electronic Oven

control and

Right front

control and

and digital display

Controls with

digital display

control and

digital display

(some models)

Clock and Kitchen

(some models)

digital display

(some models)

 

Timer

 

(some models)

Broil element

 

 

 

 

Convection fan cover

 

 

 

 

(some models)

 

 

 

Oven Vent

Self-CleaningOven

 

 

 

 

 

 

 

(some models)

 

 

 

Oven Light,

 

 

 

 

 

 

 

 

Single or

 

 

 

 

Dual (some

 

 

 

 

models)

 

 

 

 

(2) Adjustable

 

 

 

 

Oven Racks

 

 

 

 

One Piece

 

 

 

 

Door Handle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Convection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

grill (some

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Glass Front Oven

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert

models)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Door with Large

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Window Opening

Broil Pan

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Storage Drawer (slide-inmodels only)

 

 

 

 

 

 

 

 

 

 

 

 

 

6" Single or8"

 

 

 

 

 

6" Single or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Single or 5"/7"

Warmer

 

5"/7" Dual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dual Radiant

Zone

 

Radiant Element

Bridge

6" Single

 

 

 

 

 

 

 

 

 

 

 

 

 

Element (Varies

(some

 

(Varies with

Radiant

Radiant

 

Removable 8"

Removable 6"

with models).

models).

 

models).

Element.

Element.

 

Coil Element

Coil Element

6" Single or9"

1,4 or5

6"/9" Dual or

4 hot surface

9"/12"Dual

Removable 6"

Removable 8"

Single or 6"/9"

hot

9"/12" Dual

indicator lights.

Radiant

Coil Element

Coil Element

Dual Radiant

surface

Radiant

 

Element.

 

 

Element, (Varies

indicator

Element (Varies

 

 

 

 

with models).

lights.

with models).

 

 

 

 

Note:The features of your range will vary according to model. 6

Setting Surface Controls

Models with Coil Surface Elements

NOTE: All knobs shown in this owner's Guide are typical only.

1.Place the pan on the surface element.

2.Push in and turn the surface element control knob to desired setting.

3.The surface signal light will glow when one or more elements are turned on. Always turn the element off before removing the pan.

Note: The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for best cooking results.

Setting

Type of Cooking

HI (MAX)

Start most foods, bring water to a boil, pan broiling.

5 (MED)

Maintain a slow boil, thicken sauces and gravies, steam

 

vegetables.

2-4(MED-LOW)

Keep food cooking, poach, stew.

LO (MIN)

Keep warm, melt, simmer.

 

 

*The suggested settings found in the chart above are based on cooking in medium thickness aluminum pans with lids. Settings may vary when using other types of pans.

Do not place items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the cooktop when it is in use.These items could melt or ignite. Potholders, towels or wood could catch fire if placed too close to the element.

7

Setting Surface Controls

Models with Ceramic Glass Cooktop

Model A

 

Model B

Model C

 

 

 

 

 

 

 

 

 

 

 

 

About the Ceramic Glass Cooktop

The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop (See Fig. 1).

Heat is transferred up through the surface of the cooktop to the cookware. Only flat-bottomcookware should be used. The type and size of cookware, the number of surface elements in use and their settings, are all factors that will affect the amount of heat that will spread to areas beyond the surface elements. The areas surrounding the elements may becomehot enough to cause burns.

Model D Model E

Cooktop radiant areas that heat. Your appliance may have one of these configurations - Fig. 1

 

 

 

 

 

 

 

 

Small

 

Large

OFF

 

 

OFF

 

 

OFF

 

Petit

OFF

Grand

lo

hi

lo

hi

 

h

lo

hi

 

 

 

si

 

si

 

 

 

si

 

 

 

 

2

8

2

 

8

me

2

8

6

 

6

 

 

 

 

3

7

3

 

7

l

3

7

4

 

4

 

 

 

 

 

4

6

4

6

 

On/

4

6

 

 

 

med

 

 

med

 

 

med

 

lo

 

l o

Warming

Zone

Zone

Warming

Zone

Warming

Zone

About the Radiant Surface Elements

The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. To maintain the selected setting, the element will cycle on and off. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle. For efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

Locations of the Radiant Surface Elements and Controls

Your range is equipped with radiant surface elements with different wattage ratings. The ability to heat food quicker and in larger volumes increases as the element wattage increases.

The radiant surface elements are located on the cooktop as follows:

Model A (See Fig. 1):

-Two dual 5 or 7 inch radiant element at the right and left rear position;

-Two dual 6 or 9 inch radiant element at the right and left front position;

Model B (see Fig. 1):

-Two 6 inch radiant elements at the right rear and left front positions;

-A 8 inch radiant element at the left rear position;

-A dual 6 / 9 inch radiant element at the right front position;

Model D shown Only - Fig. 2

NOTE: Please read detailed instructions for ceramic glass cooktop cleaning in theGeneral Care & Cleaning section andBefore You Call checklist section of this Use and Care Guide.

NOTE: Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to prevent damage to the ceramic smooth top. Cycling at the HI setting is normal and can occur if the cookware is too small for the radiant element or if the cookware bottom is not flat (Refer to page 12 under Selecting Surface Cooking Utensils).

NOTE: Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the element will be turned off.This phenomenon is normal and the glass will come back to its original white color after it has completely cooled down (White glass cooktops only).

Model C (see Fig. 1):

-Two 6 inch radiant elements at the right and left rear positions;

-A dual 9 / 12 inch radiant element at the right front position;

-A 9 inch radiant element located at the left front position.

Model D (See Figs. 1 and 2):

-Two 6 inch radiant elements at the right and left rear positions;

-A dual 9 / 12 inch radiant element at the right front position;

-A 9 inch radiant element located at the left front position;

-A Warmer Zone radiant element located between the right and left rear positions.

Model E (see Fig. 1):

-A 6 inch radiant element at the right rear position;

-A dual 9 / 12 inch radiant element at the right front position;

-A Bridge radiant element located at the left front & rear positions.

8

Setting Surface Controls

Models with Ceramic Glass Cooktop (continued)

Surface Cooking Settings (Models with Ceramic Glass Cooktop)

Use the chart (Fig. 1) to determine the correct setting for the kind of food you are preparing. The Simmer settings are used to simmer and keep larger quantities of foods warm such as stews and soups. The lower Simmer settings are ideal for delicate foods and melting chocolate or butter.

Note: The size and type of cookware used will influence the setting needed for best cooking results.

 

Recommended Settings for Single, Bridge and

 

 

Dual Surface Elements

 

 

 

Setting

 

Type of Cooking

 

 

 

HIGH (Hi)

 

Start most foods, bring water to a boil, pan broiling

MEDIUM HIGH (5-8)

Continue a rapid boil, fry, deep fat fry

MEDIUM (5)

 

Maintain a slow boil, thicken sauces and gravies, steam vegetables

MEDIUM LOW (2 - 4)

Keep foods cooking, poach, stew

LOW (Lo - 2)

 

Keep warm, melt, simmer

 

 

 

 

 

Fig. 1

Radiant surface elements may appear to have cooled after they have been turned off. A hot surface indicator light will come on and will continue to glow until the glass cooktop has cooled down to a moderate level.The glass surface may still be hot and burns may occur if the glass surface is touched before the indicator light has turned off.

Do not place plastic items such as salt and pepper shakers, spoon holdersorplasticwrappings on top of the range when it is in use.These items could melt or ignite. Potholders, towelsorwoodenspoonscould catch fire if placed too close to the surface elements.

The electronic surface element control (ESEC)

The Electronic Surface Element Control (“ESEC”) feature includes digital display windows. The ESEC feature provides a numeric digital setting for the radiant surface element positions on the cooktop. These settings work the same way as normal knob setting indicators work except the settings are displayed in digital windows (Figs. 2 thru 5).

The available ESEC Display Settings

The ESEC control provides various heat levels from Hi (Fig. 3) toLo (Fig. 4) and OFF (Fig. 2).

Use the chart (on top of page) to determine the correct setting for the kind of food you are preparing. The Simmer settings are used to simmer and keep larger quantities of foods warm such as stews and soups. The lower Simmer settings are ideal for delicate foods and melting chocolate or butter.

Note: The size and type of cookware used will influence the setting needed for best cooking results.

Radiant surface elements may appear to have cooled after they have been turned off. The Hot surface indicator light will come on and will continue to glow until the glass cooktop has cooled down to a moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

hi

OFF

hi

OFF

hi

hi

Fig.2

Fig. 3

OFF

hi

OFF

 

hi

Fig. 4

Fig. 5

Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the surface elements.

9

Setting Surface Controls

Models with Ceramic Glass Cooktop (continued)

Hot Surface Indicator Lights

After using any of the radiant element positions the cooktop will become very hot. After turning any of these elements OFF, the cooktop will remain HOT for some time. The “Hot Surface” indicator light will glow whenever any of the element positions becomes HOT. TheHot Surface indicator light will remain ON while hot and turn OFF once the cooktop has cooled sufficiently.

ESEC Error Indicator Message (Er)

An error message will be displayed (flashing “Er”) at power up (or after a power failure) if ANY of the surface control knobs were left in the ON positions (See Fig. 1). If a power failure should occur, be sure to set all of the surface control knobs to the OFF position. This will reset the surface controls.

Once the surface controls have been set to the OFF positions, the surface controls should return

Fig. 1

 

to normal operation. If the surface controls do not function and the “Er” message remains in any

 

display after following these procedures, contact an authorized servicer for assistance.

 

ESEC Lockout Feature ( - - )

The ESEC feature will not operate during a Self-Cleancycle. Whenever the ESEC Lockout

 

feature is active, " - - " will appear in any display window (See Fig. 2).

Fig. 2

 

Operating Single Radiant Surface Elements (Models with Ceramic Glass Cooktop Only)

The cooktop has single radiant surface elements at location as shown on Figs. 4 to 7.

To Operate the Single Surface Elements:

1. Place correctly sized cookware on the radiant surface element.

2. Push in and turn the surface control knob in either direction to the desired setting (Fig. 3). Turn the knob to adjust the setting if desired. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

3.When cooking has completed, turn the surface control knob to OFF before removing the cookware. Note: The Surface Indicator light will come on when the control knob will be turn on and will continue to glow until the glass cooktop has cooled down to a moderate level. The light may remain on even though the controls are turned OFF.

Fig. 3

Note: See page 9, Fig. 1 for recommended control settings.

Fig. 4- Model B

Fig. 5 -ModelC

Fig. 6 -ModelD

Fig. 7 - Model E

Left & Right Rear Ele-

Left & Right Rear Ele-

Left & Right Rear Ele-

Left Rear Element & Left

ments and Left front

ments and Left front

ments and Left front

Front Area of the Bridge

element

element

element.

Element can also be used

 

 

 

as a singe element (see

 

 

 

page 12).

 

 

10

 

Setting Surface Controls

Models with Ceramic Glass Cooktop (continued)

Operating the Dual Surface Radiant Element (Models with Ceramic Glass Cooktop Only)

Model A is equipped with Dual radiant surface elements at all positions (See Figs. 5 & 6). Models B, C, D & E are equipped with a dual radiant surface element located at the right front (See Figs. 7 to 14) position. Symbols on the control panel are used to indicate which coil of the dual radiant element will heat. Thesymbol indicates that only

the inner coil will heat (Figs. 1, 3, 5, 7, 9, 11 & 13). The

symbol indicates that both inner and outer coils will heat (Figs. 2, 4, 6, 8, 10, 12 & 14). You may switch from either coil setting at any time during cooking.

Small

Element

 

Fig. 1

Small

Large

Petit

OFF Grand

hi

hi

6

6

4

4

2

2

lo

l o

Fig. 3

To Operate the Dual Surface Element:

1.Place correctly sized cookware on the dual surface element.

2.Push in and turn the control knob counterclockwise (See Fig. 3) for smaller cookware or clockwise (See Fig. 4) for larger cookware.

3.Turn the knob to adjust the setting if needed. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

4.When cooking has completed, turn the surface control knob to OFF before removing the cookware. Note: The Surface Indicator light will come on when the control knob will be turn on and will continue to glow until the glass cooktop has cooled down to a moderate level. The light may remain on even though the controls are turned OFF.

Note: See page 9, Fig. 1 for recommended control settings.

Radiant surface elements may appear to have cooled after they have been turned off. A hot surface indicator light will come on and will continue to glow until the glass cooktop has cooled down to a moderate level.

The glass surface may still be hot and burns may occur if the glass surface is touched before the indicator light has turned off.

Fig. 5 - Model A

Fig. 7 - Model B

Fig. 9 - Model C

Fig. 11 - Model D

11

Fig. 13 - Model E

 

Large

Element

 

Fig. 2

Small

Large

Petit

OFF Grand

hi

hi

6

6

4

4

2

2

lo

l o

Fig. 4

Fig. 6 - Model A

Fig. 8 - Model B

Fig. 10 - Model C

Fig. 12 - Model D

Fig. 14 - Model E

Fig. 1
Fig. 2
Fig. 3
Bridge element without Bridge portion.

Models with Ceramic Glass Cooktop (continued)

Operating the Bridge Surface Radiant Element (Model E)

Model E (See Page 8) is equipped with a “BRIDGE” surface element located at the left front and middle (See Fig. 6) positions. The Bridge can be used when cooking with rectangular (like a griddle) or oval shaped cookware. The element will maintain an even temperature setting across both portions of the Bridge. If needed for normal cookware, the Bridge element can work like a single element without the Bridge (See Fig. 3).

Bridge element operation symbols are located on the control panel on each side of the Bridge element control knob. These symbols indicate the direction to turn the control knob when operating the Bridge element. The symbol in Figure 1 indicates that only the single portion of the Bridge element will heat (Fig. 3). The symbol in Figure 4 indicates that both the single and Bridge portions of the element will heat together (Fig. 6). You may switch from either of these settings at any time during cooking with the Bridge element.

To Operate the Bridge Surface Element:

1.Place correctly sized cookware on the Bridge surface element.

2. Push in and turn the control knob counterclockwise (See Figs. 2 and 3) to heat the portion of the Bridge element for

normal shaped cookware or clockwise (See Figs. 5 and 6) for larger or rectangular shaped cookware.

3. Turn the knob to adjust the setting if needed. Start most cooking operations on a higher setting and then turn to a

lower setting to finish cooking. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small. Please note that not all cookware will fit the Bridge element correctly.

4.When cooking has completed, turn the surface control knob to OFF before removing the cookware. Note: The Surface Indicator light will come on when the control knob will be turn

on and will continue to glow until the glass cooktop has cooled down to a moderate level. The light may remain on even though the controls are turned OFF.

The BRIDGE element may also be used in combination with the left rear single element. Because these elements have 2 different controls, one element can be used to cook while the other element may be used to keep food warm (See Fig. 7).

Note: See page 9, Fig. 1 for recommended control settings.

Fig. 4

Fig. 5

Fig. 6

Bridge element with Bridge portion.

Fig. 7

Radiant surface elements may appear to have cooled after they have been turned off. A hot surface indicator light will come on and will continue to glow until the glass cooktop has cooled down to a moderate level.The glass surface may still be hot and burns may occur if the glass surface is touched before the indicator light has turned off.

12

Setting Surface Controls

Models with Ceramic Glass Cooktop (continued)

Operating the Warmer (Warm & Ready™) Zone (Model D):

The purpose of the Warmer Zone is to keep hot cooked foods at serving temperature. Use the Warmer Zone to keep cooked foods hot such as: vegetables, gravies, casseroles, soups, stews, breads, pastries and ovensafe dinner plates. Always start with hot food. It is not recommended to heat cold food on the Warmer Zone.

All food placed on the warmer zone should be covered with a lid to maintain quality. For best results, when warming pastries or breads, the cover should have an opening to allow moisture to escape. Do not use plastic wrap or aluminum foil to cover food. Plastic or aluminum may melt onto the surface.

Use only plates, utensils and cookware recommended for oven and cooktop use on the Warmer Zone.

Warmer Zone Temperature Selection

Refer to the Warmer Zone table for recommended heating levels (Fig. 1). If a particular food is not listed, start with the medium level, and adjust as needed. Most foods can be kept at serving temperatures by using the medium level.

Warmer Zone Recommended Food

Settings Table

Food Item

Heating Level

Hot Beverages

HI

Fried Foods

HI

Vegetables

MED

Soups (Cream)

MED

Stews

MED

Sauces

MED

Meats

MED

Gravies

LO

Eggs

LO

Dinner Plates with Food

LO

Casseroles

LO

Breads/Pastries

LO

Fig. 1

 

To Set the Warmer Zone Control:

1.Touch the On/Off pad at the Warmer Zone control position. The Warmer Zone

indicator light will flash. Note: If no further pads are touched within 25 seconds the request to power the Warmer Zone ON will clear.

2.At the Warmer Zone controls position touchonce to turn ON the power level forHI (see Fig. 2) orto turn ON the power level forLO (see Fig. 5). The Warmer Zone Indicator light located above the ON/OFF pad will turn on steady and theHot Surface indicator light located on the cooktop will turn ON when the Warmer Zone becomes hot.

3.Each touchorwill increase or decrease the power levels. The Warmer Zone has 5 power levels fromHI (see Fig. 2) throughMED (see Fig. 4) toLO (see Fig. 5). The power level may be adjusted at any time while the Warmer Zone is ON.

4.When the food is ready to serve, touch theOn/Off pad once to turn the Warmer Zone OFF. The Warmer Zone indicator light will turn OFF.

Note: The Hot Surface indicator light located on the cooktop will remain ON if the cooktop is still hot and will remain ON until the heating surface area has cooled sufficiently.

hi

hi

med

med

lo

lo

On/Off

On/Off

Warming

Warming

Zone

Zone

Zone Réchaud

Zone Réchaud

Fig. 2

Fig. 3

hi

hi

med

med

lo

lo

Fig. 4

Fig. 5

Radiant surface elements may appear to have cooled after they have been turned off.The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use.These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the surface elements or burners.

The Warmer Zone will not glow red when it is hot, but becomes hot enough to cause burns. Avoid placing hands on or near the Warmer Zone until the Warmer Zone Hot Surface indicator light is OFF. Always use potholders or oven mitts when removing food from the warmer zone as cookware and plates will be hot.

13

Surface cooking

Selecting Surface Cooking Cookware

Cookware should have flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 1). Be sure to follow the recommendations for using cookware as shown in Fig. 2.

Note: The size and type of cookware used

 

will influence the setting needed for best

Fig. 1

cooking results.

Cookware Material types

The cookware material determines how evenly and quickly heat is

 

transferred from the surface element to the pan bottom. The most

Fig. 2

popular materials available are:

ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pitting). If aluminum pans slide across the ceramic glass cooktop, they may leave metal marks which will resemble scratches. Remove these marks immediately.

COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum above).

STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.

CAST IRON - A poor heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached. Not recommended for use on ceramic cooktops.

PORCELAIN-ENAMEL on METAL - Heating characteristics will vary depending on base material.Porcelain-enamelcoating must be smooth to avoid scratching ceramic cooktops.

GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass.

Before Setting Oven Controls

Air Circulation in the Oven

For best air circulation and baking results allow 2-4"(5-10cm) around the

 

cookware for proper air circulation and be sure pans and cookware do not

 

touch each other, the oven door, sides or back of the oven cavity. The hot

1 Oven Rack

air must circulate around the pans and cookware in the oven for even heat

 

to reach around the food.

 

Multiple Oven Racks

14

Before Setting Oven Controls

This range has a fan that will turn “ON” and “OFF” by itself to keep the electronics cool. It may continue to run after the range has been turned “OFF”, but may also stop immediately and then turn “ON” after a while.

Oven Vent Location -Modelswith Coil Elements

The oven is vented through the right rear coil element. When theovenison,warmairisreleased through the vent. This venting is necessaryforproperaircirculation in the oven and good baking results. DO NOT block the vent. Doing so may cause cooking failures, fire or damage to the appliance.

OVEN VENT

Oven Vent Location -Modelswith Ceramic Glass Cooktop

The oven vent is located at right side of the front panel and visible when the oven door is open. When the oven is on, hot air is released through the vents. This venting is necessary for proper air circulation in the oven and good baking results.

Removing and Replacing Oven

Racks

To remove, pull the rack forward until it stops. Lift up front of rack and slide out.To replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.

OVEN VENT

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when the oven is hot.

4

3

2

1

Rack

positions

RECOMMENDED RACK POSITIONS FOR

BROILING, BAKING & ROASTING

Food

Rack position

 

 

Broiling meats, chicken or fish

3 or 4

 

 

Cookies, cakes, pies, biscuits & muffins

 

1 rack

2 or 3

Multiple racks

2 & 4

 

 

Frozen pies, angel food cake, yeast, bread,

1 or 2

casseroles, small cuts of meat or poultry

 

 

 

Turkey, roast or ham

1

 

 

Note: Always use caution when removing food.

 

Setting Oven Controls

Refer to the Electronic Oven Control Guide for oven settings.

15

Setting Warmer Drawer Control (If Equipped)

Arranging Warmer (Warm & Ready™) Drawer Rack Positions

The rack can be used in 2 ways:

In the upright position to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish underneath).

In the downward position to allow you to place light weight food items and empty dishware (for example, rolls or pastries and dinner plates) on the rack.

Set the Warmer Drawer Rack in either position as shown below (Fig.1).

Operating the Warmer Drawer

The purpose of the Warmer Drawer is to keep hot cooked foods at serving temperature. Always start with hot food. It is not recommended to heat cold food in the Warmer Drawer. All food placed in the Warmer Drawer should be covered with a lid or aluminum foil to maintain quality. Do not use plastic wrap to cover food. Plastic may melt onto the drawer and be very difficult to clean. Use only utensils and cookware recommended for oven use in the Warmer Drawer.

Always use potholders or oven mitts when removing food from the Warmer Drawer as cookware and plates will be hot and you can be burned.

 

Warmer Drawer

 

Rack in upward

 

position

 

Warmer Drawer

Fig. 1

Rack in downward

position

 

Warmer Drawer Temperature Selection

Recommended Warmer Drawer settings table is shown in Fig. 2. If a particular food is not listed, start with the MED setting. If more crispness is desired, remove the lid or aluminum foil from the food. Most foods can be kept at serving temperatures on theMED setting. When a combination of foods are to be kept warm (for instance, meat with 2 vegetables and rolls), use theHI setting. To avoid heat loss, do not open the Warmer Drawer while in use.

16

Warmer Drawer recommended Food Settings Table

Food Item

Setting

Bacon

HI

Hamburger Patties

HI

Poultry

HI

Pork Chops

HI

Fried Foods

HI

Pizza

HI

Gravies

MED

Casseroles

MED

Eggs

MED

Roasts (Beef, Pork, Lamb) MED

Vegetables

MED

Biscuits

MED

Rolls, hard

MED

Pastries

MED

Rolls (soft)

LO

Empty Dinner Plates

LO

Fig. 2

Setting Warmer Drawer Control (If Equipped)

To Set the Warmer Drawer Controls:

The control and indicator lights for the Warmer Drawer features are located on the control panel. The temperatures are approximate, and are designated by HI (high),MED (medium) andLO (low).

1.Touch the (see Fig. 4) pad at the Warmer Drawer control position. The Warmer Drawer indicator light will flash. Note: If no further pads are touched within 25 seconds the request to power the Warmer Drawer ON will clear.

2.Set the desired power level. Touch once to turn ON the power level for HI (see Fig. 1) orto turn ON the power level for LO (see Fig. 3). The Warmer Drawer indicator light located beside thepad will turn ON steady.

3.Each touch of the orpads will decrease or increase through 5 power levels fromHI (see Fig. 1) toMED (see Fig. 2) toLO (see Fig. 3). Note: For best results, preheat the Warmer Drawer before adding the food . An empty drawer will preheat in approximately 15 minutes.

4. When the food is ready for removal, touch the pad once to turn the Warmer Drawer OFF. The Warmer Drawer indicator light will turn OFF.

Note: The Warmer Drawer is inoperable during the self-cleancycle.

Note: The warmer drawer is equipped with a latch which may require extra force when opening and closing the drawer.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

17

Cooking Informations

Oven Baking

For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc... There is no need to preheat the oven for roasting meat or baking casseroles.

The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.

Baking Problems and Solutions Chart

Baking Problems

Causes

Corrections

 

 

 

 

Cookies and

Cookies and biscuits put into

• Allow oven to preheat to the selected temperature

biscuits burn on

 

the oven before the preheating

before placing food in oven.

the bottom.

 

time is completed.

 

 

Oven rack overcrowded.

• Choose pan sizes that will permit 5.1 cm to 10.2 cm (2”

 

 

 

to 4”) of air space on all sides when placed in the oven.

 

Dark pan absorbs heat too fast.

• Use a medium-weightaluminum baking sheet.

 

 

 

 

Cakes too dark

Cakes put into the oven before

• Allow oven to preheat to the selected temperature

on top or bottom.

 

preheating time is completed.

before placing food in the oven.

 

Rack position too high or low.

• Use proper rack position for baking needs.

 

Oven too hot.

• Set oven temperature 25°F/12°C lower than recom-

 

 

 

mended.

 

 

 

 

Cakes not done

Oven too hot.

• Set oven temperature 25°F/12°C lower than

in the center.

Incorrect pan size.

recommended.

 

Pan not centered in oven.

• Use pan size suggested in recipe.

 

 

 

• Use proper rack position and place pan so there is 5.1

 

 

 

cm to 10.2 cm (2” to 4”) of space on all sides of pan.

 

 

 

 

Cakes not level.

Range not level.

• Place a marked glass measuring cup filled with water

on the center of the oven rack. If the water level is

 

 

 

 

 

 

uneven, refer to the installation instructions for leveling

 

• Pan too close to oven wall or

the range.

 

• Be sure to allow 5.1 cm to 10.2 cm (2” to 4”) of

 

 

rack overcrowded.

 

 

clearance on all sides of each pan in the oven.

 

Pan warped.

 

• Do not use pans that are dented or warped.

 

 

 

 

 

 

 

Foods not done

Oven too cool.

 

when cooking

• Set oven temperature 25°F/12°C higher than suggested

 

 

time is up.

Oven overcrowded.

and bake for the recommended time.

 

• Be sure to remove all pans from the oven except the

 

 

 

 

• Oven door opened too

ones to be used for baking.

 

• Open oven door only after shortest recommended

 

 

frequently.

 

 

baking time.

 

 

 

 

 

 

 

18

Cooking Informations

Broiling

Broiling is a method of cooking tender cuts of meat by direct heat under the broil element of the oven.

Open door

to the “Broil Stop”

position when broiling.

Always pull oven rack out to the “stop” position before turning or removing food.

Preheating

Preheating is suggested when searing rare steaks. (Remove the broiler pan before preheating. Foods will stick if placed on hot metal.) To preheat, set the oven control(s) to BROIL as instructed in the Electronic Oven Control Guide. Wait for the element to become red-hot,usually about 2 minutes. Preheating is not necessary when broiling meatswell-done.

To Broil

Broil on one side until the food is browned; turn and cook on the second side. Season and serve. Always pull rack out to the “stop” position before turning or removing food.

Determining Broiling Times

Broiling times vary, so watch the food closely. Time not only depends on the distance from the element, but on the thickness and aging of meat, fat content and doneness preferred.The first side usually requires a few minutes longer than the second. Frozen meats also require additional time.

Broiling Tips

The broiler pan and its grid allow dripping grease to drain and be kept away from the high heat of the broiler.

DO NOT use the pan without its grid. DO NOT cover the grid with foil. The exposed grease could ignite.

Should an oven fire occur, close the oven door and turn off the oven. If the fire continues, throw baking soda on the fire or use a fire extinguisher.DO NOT put water or flour on the fire. Flour may be explosive.

Broiler Clean-UpTips:

Grid

Broiler Pan

To make cleaning easier, line the bottom of the broiler pan with aluminum foil. DO NOT cover the broiler grid with foil.

To prevent grease from baking on, remove the broiler pan from the oven as soon as cooking is completed. Use hot pads because the broiler pan is extremely hot. Pour off grease. Soak the pan in HOT, soapy water.

Clean the broiler pan as soon as possible after each use. If necessary, use soap-filledsteel wool pads. Heavy scouring may scratch the grid.

19

Care & Cleaning

(Cleaning Chart)

Cleaning Various Parts of Your Range

Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR CLEANING LATER.

Surfaces

How to Clean

 

 

Aluminum & Vinyl

Use hot, soapy water and a cloth. Dry with a clean cloth.

 

 

Painted and Plastic Control

Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar

Knobs, Body Parts, and

and water. Follow by rinsing the area with clean water; dry and polish with a soft cloth. Glass

DecorativeTrim

cleaners may be used if sprayed on a soft cloth first. DO NOT spray liquids directly on the

 

control pad and display area. Do not use large amounts of water on the control panel - excess

 

water on the control area may cause damage to the appliance. Do not use other liquid

 

cleaners, abrasive cleaners, scouring pads, or paper towels - they will damage the finish.

 

To remove control knobs, turn to the OFF position; grasp firmly and pull straight off the shaft.

 

To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then

 

push the knob into place.

 

 

Easy Care™ Stainless

Your range finish is may be made with Easy Care™ Stainless Steel (some models).

Steel (some models) Oven

Clean the stainless with warm soapy water using a clean sponge or cloth. Rinse with

Door & Drawer Front Panel and

clean water and dry with a soft clean cloth. DO NOT useANY store bought cleaners like

Decorative Trim

Stainless Steel cleaners or any other types of cleaners containing any abrasive,

 

chlorides, chlorines or ammonia. It is recommended to use mild dish soap and water or

 

a 50/50 solution of water and vinegar.

 

 

Surface Elements and Drip

Surface elements can be unplugged and removed to make cleaning the drip bowls easier.

Bowls (some models)

The surface elements clean themselves when they are turned on. Food spilled on a hot

 

element will burn off. Food spilled on a cold element can be cleaned with a damp cloth any

 

remaining soil will burn off the next time element is used. NEVER IMMERSE A SURFACE

 

ELEMENT IN WATER. To remove surface element and drip bowls, follow the instructions

 

under General Cleaning.

 

To clean drip bowls, wash in hot, soapy water or in the dishwasher. Rinse and dry while still

 

warm. Hard-to-remove,burned-onsoils can be removed by soaking the drip bowls for about

 

20 minute in a slightly diluted liquid cleanser or solution made of equal parts ammonia and

 

water. A nylon scrubber may be used after soaking. DO NOT use abrasive cleanser or steel

 

wool, as they will scratch the surface. Always rinse with clean water and polish, and dry

 

with a soft cloth. To replace drip bowls and surface elements, follow the instructions under

 

General Cleaning.

 

 

Porcelain Enamel

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1

Broiler Pan and Insert, Door

solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-

Liner, Body Parts and

soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then

Warmer Drawer and Drawer

scrub with a soap-filledscouring pad. Rinse and wipe dry with a clean cloth. Remove all

Cavity

cleaners or the porcelain may become damaged during future heating. DO NOT use spray

 

oven cleaners on the cooktop.

 

 

20

 

Care & Cleaning

 

(Cleaning Chart)

Oven Racks

Oven racks should be removed, or else their finish will dull and their color turn slightly

 

blue. If they do go through the self-cleancycle, wait until the oven has cooled, then remove

 

the oven racks and rub their sides with wax paper or a cloth containing a small amount of

 

baby or salad oil; this will make the oven racks glide easier back in and out of their

 

positions.

Oven door

To clean oven door, wash with hot, soapy water and a clean cloth. DO NOT immerse the

 

door in water.

Do

DO NOT clean the oven door gasket. The oven door gasket is made of a woven material,

Hand

on self cleaning models, which is essential for a good seal. Care should be taken not to

Clean

rub, damage or remove the gasket.

Frame

 

Do Not

 

Hand

 

Clean Seal

 

Do Hand Clean Door

 

Cooktop Cleaning - Coil Surface Element Models Only

To Remove and Replace Surface Elements and Drip Bowls (some models)

Be careful

not to bend terminal ends when replacing elements after cleaning.

ATTENTION: Never leave covers on the coil elements as they could be permanently damaged if the coil is turned on by accident.

Prior to cleaning the coil elements make sure they are cold and that control knobs are turned to OFF

Coil elements clean themselves when they are turned on.

Coil elements and drip bowls are removable and allow to clean the drip bowls.

To remove a coil element, push against the front edge and lift element up and out.

To clean by hand, wash the drip bowls in hot sudsy water. For hard to remove spots, use nylon scrubber with soap. Rinse and dry will still warm.

Never immerse coil elements in water.

SURFACES

CLEANING AGENTS

INSTRUCTIONS

 

 

 

Porcelain enamel

Mild cleaners or soap-filled

Use a damp sponge or dampened soap pad, rinse

(cooktop, surface under

steel wool pads.

and dry.

cooktop)

 

 

 

 

 

Insert - Control Panel

Hot, soapy water or cleaner

Use a clean soapy, dampened cloth or paper towel,

cream.

remove soil and dry. Do not use abrasive products.

 

 

 

 

21

Care & Cleaning

Cooktop CleaningCoil Surface Element Models Only (Continued)

A rod swings up to support the top for cleaning underneath.

To Raise theTop for Cleaning (some models)

1.Grasp the sides and lift from the front. A lift-uprod will support the top in its raised position. Only lift the top high enough to allow the support rod to rest in place under the front of the cooktop.

2.Clean underneath using a clean cloth and hot, soapy water.

3.To lower the top, lift the top slightly and lower the rod. Lower the range top down into the range frame.

When lowering the lift-uprange top, grasp the sides with fingertips only. Be careful not to pinch fingers.DO NOT drop or bend the range top when raising or lowering. This could damage the surface.

Cooktop Cleaning - Porcelain enamel Cooktop Models

Porcelain enamel cooktop cleaning instructions (some models)

Do not use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can chemically damage the cooking surface.

Before cleaning the surface cooktop, be sure the controls are turned to OFF and the cooktop is cool.

DO NOT use commercial oven cleaners on theexterior surfaces including rangetop and door frame.

Correct and consistent cleaning is essential to maintaining your porcelain enamel cooktop. If food spills and grease spatters are not removed, they may burn onto the surface of the cooktop and cause permanent discoloration.

Daily Cleaning

For normal soil:

1.Allow cooktop surface to cool.

2.Wipe off spills and spatters using a clean paper towel or a clean cloth with warm, soapy water.

3.If needed, use a soapy steel wool pad or other mild household cleaners.

4.Be sure to rinse off the cleaners or the porcelain may become damaged during future heating.

For heavy, burned-onsoil:

1.Allow cooktop surface to cool.

2.Use a soap filled scouring pad with warm water or cover heavily soiled spots with a solution of clear water and ammonia. Scour gently. Rinse and wipe dry with a clean cloth.

3.If any soil remains, apply a few drops of a recommended cooktop cleaning cream on the spots and rub gently using a clean damp cloth or scouring pad. Buff with a dry cloth until all soil and cream are removed. Frequent cleaning with the cooktop cleaning cream leaves a protective coating which helps in preventing scratches and abrasions.

For sugary spillovers:

Sugary spills can chemically damage your cooktop surface. Therefore, you must begin cleaning the spills while the cooktop is still hot. Use caution when following the steps below.

1.Turn off all surface units and remove all pans immediately.

2.Wearing an oven mitt, wipe up carefully or move hot spills away from the element area with a clean damp cloth.

3.Allow the cooktop to cool. Follow the instructions above for heavy, burned-onsoil.

COOKTOP CLEANING / POLISHING CREAM can be purchased through authorized service centers or major department stores.

22

Care & Cleaning

Models with Ceramic Glass Cooktop

Ceramic Glass Cooktop Cleaning & Maintenance

Consistent and proper cleaning is essential to maintaining your Ceramic glass cooktop

Prior to using your cooktop for the first time, apply the recommended CERAMA BRYTE® Cleaning Creme to the ceramic surface. Clean and buff with a non abrasive cloth or pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings on the cooktop surface. These marks should be removed immediately after the cooktop has cooled using the cooktop cleaning cream. Metal marks can become permanent if not removed prior to future use.

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the cooktop surface. Do not slide anything metal or glass across the cooktop.Do not use your cooktop as a cutting board or work surface in the kitchen.Do not cook foods directly on the cooktop surface without a pan.Do not drop heavy or hard objects on the glass cooktop, or they may crack it.

Before cleaning the cooktop, be sure the controls are turned toOFF and the cooktop is COOL.

DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can chemically damage the ceramic glass surface.

Cleaning Recommendations for the Ceramic Glass Cooktop

For light to moderate soil:

Apply a few drops of CERAMA BRYTE® Cleaning Creme directly to the cooktop. Use a paper towel or a Multi-PurposeNo Scratch Scrub Sponge to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no residue. Do not use the sponge you use to clean the cooktop for any other purpose.

For heavy, burned on soil:

First, clean the surface as described above. Then, if soils remain, carefully scrape soils with a metal razor blade scraper, holding scraper at a 30 degree angle to the surface. Remove loosened soils with cooktop cleaning cream and buff surface clean.

Damage to the ceramic glass cooktop may occur if you use any scrub pad other than aMulti-PurposeNo Scratch Scrub Sponge.

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately. After turning the surface elements OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot surface (as illustrated). Allow the cooktop to cool, and use the same method for heavy or burned on soils.

23

Care & Cleaning

Models with Ceramic Glass Cooktop (Continued)

Do not use the following on the ceramic glass cooktop:

• Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean.

Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop.

Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint

on the cooktop which can burn and cause discoloration.

Special Caution for Aluminum Foil and Aluminum Cooking Utensils

Aluminum foil

Use of aluminum foil will damage the cooktop. Do not use under any circumstances.

Aluminum utensils

Since the melting point of aluminum is much lower than that of other metals, care must be taken when aluminum pots or pans are used. Pans that boil dry may permanently damage cooktop by breaking, fusing to, or marking it.

Care and Cleaning of Stainless Steel (Stainless Steel models only)

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Please refer to the table provided at the beginning of theGeneral Care & Cleaning section in this Use & Care Guide.

Oven Cleaning

Cleaning the Regular Oven (non self-cleanoven, some models)

Make sure the oven is cool and that all control knobs are et OFF position. Cleaning the oven is a lot easier when the door is removed.

1.Remove the oven door; see under To Remove and Replace the Oven Door in this Owner's Guide.

2.Empty the oven including the racks.

3.You can wash the broiler pan, grid and racks in the kitchen sink.

4.Clean oven lining thoroughly with soap and a wet cloth and wipe with a dry cloth.

To remove burned-onfat on oven walls, moisten soiled parts with household ammonia, using a wet cloth. Follow suggested manufacturer's cleaning method. (Do not remove the oven door when using ammonia.)

Complete cleaning with a damp cloth and use a fine steel wool scouring agent if necessary.

The lower element can be moved up for cleaning purposes.

5. Replace racks in the oven. Reinstall oven door.

24

Care & Cleaning

Oven Cleaning (Continued)

Cleaning the Self-CleanOven (some models)

Adhere to the following cleaning precautions:

-Allow the oven to cool before cleaning.

-Wear rubber gloves when cleaning any exterior parts of the oven manually.

During theself-cleancycle, the outside of the wall oven can become very hot to the touch. DO NOT leave small children unattended near the appliance.

The health of some birds is extremely sensitive to the fumes given off during theself-cleaningcycle of any range. Move birds to another well ventilated room.

Before cleaning any part of the oven, be sure the electronic oven control is turned off or else push CANCEL pad. Wait until the oven is cool.

DO NOT use commercial oven cleaners or oven protective coatings in or around any art of the self-cleaningoven. DO NOT clean the oven door gasket.The gasket on the oven door is essential for a good seal. Care should be taken not to rub, damage or move the gasket. DO NOT cooking or foil could melt and damage the oven surface.

A self-cleaningoven cleans itself with high temperatures (well above cooking temperatures) which eliminate soil completely or reduce it to a fin powdered ash you can which away with damp cloth.

 

Do Hand

 

Clean

 

Frame

Do Hand

Do Not Hand

Clean Door

Clean Seal

Preparing the Oven for Self-Cleaning

1.Remove all excess spillovers in the oven cavity before starting the selfcleaning cycle.To clean, use hot soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may cause a dull spot even after cleaning.

2.Clean any soil from the oven frame and the door liner (see illustration). These areas heat sufficiently during self-cleaningcycle to burn soil on. Clean with soap and water.

3.Remove the broiler pan and insert, all utensils and any foil.These items do not withstand high cleaning temperatures

4.Oven racks may be left in the oven or may be removed. If they go through the clean cycle, their color will turn slightly dull. After the cycle is completed and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of baby oil or salad oil. This will make the racks glide easier.

What to Expect During Cleaning

While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed. Smoke may appear through the oven vent, located on the top of the control panel.

If heavy spillovers are not wiped up before cleaning, they may flame and cause more smoke and odor than usual. This is normal and safe and should not cause alarm. If available, use an exhaust fan during the self-cleaningcycle.

NOTE: A smoke eliminator in the oven vent converts most of the soil into a colorless vapor.

Setting the Controls for Self-CleanCycle

For the setting of the clean cycle, refer to Timer or Electronic Oven Control Guide.

25

Care & Cleaning

Hinge

Hinge lever hook

support

 

Lock engaged for door removal

 

Fig. 1

HINGE SLOT - Door removed from the oven Fig. 2

Hinge lever

Lock in normal position

Fig. 3

Removing and Replacing the Oven Door

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To Remove Oven Door:

1.Open the door to the fully opened position.

2.Pull up the lock located on both hinge supports and engage it in the hinge lever hooks (Fig. 1).You may have to apply a little downward pressure on the door to pull the locks fully over the hinge lever hooks.

3.Grab the door by the sides and pull the bottom of the door up and toward you to disengage the hinge supports. Keep pulling the bottom of the door toward you while rotating the top of the door toward the range to completely disengage the hinge levers (Fig. 2).

4.To clean oven door, follow the instructions provided in the General Care & Cleaning table.

To Replace Oven Door:

1.Grab the door by the sides; place the hinge supports in the hinge slots. Open the door to the fully opened position.

2.Disengage the lock from the hinge lever hooks on both sides (Fig. 3).

Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers.

3.Close the oven door.

Special Door Care Instructions - Most oven doors contain glass that can break. Read the following recommendations:

1.Do not close the oven door until all the oven racks are fully in place.

2.Do not hit the glass with pots, pans, or any other object.

3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

To Remove the “Hidden Bake” Cover (some models)

1.In order to remove the “hidden bake” cover, pull the back edge with one hand about 1/2" inch and lift up the “hidden bake” cover with both hands. (See picture)

2.When re-installingthe “hidden bake” cover, be sure to put it all the way to the back of the oven and lay it down on the 2 shoulder screws. Then push the front edge of the cover in its place below the front bracket.

To have easier access to the "hidden bake" cover, you can remove the oven door by following the instructions on previous page.

IMPORTANT: Always replace the “hidden bake” cover before the next use.

Changing Oven Light

Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb. Do not turn the oven light on during theself-cleaningcycle. High temperature will reduce lamp life.

On some models an interior oven light will turn on automatically when the oven door is opened.

The oven light may be turned on when the door is closed by using the oven light switch located on the control panel.

On a self clean oven the lamp is covered with a glass shield held in place by a wire holder.

THIS GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.

To replace the light bulb: CAUTION: BE SURE OVEN IS COOL

1. Turn the power off at the main source.

2. Wear a leather-facedglove for protection against possible broken glass. 3. Replace bulb with a 40 watt appliance bulb only.

4.For self-cleaningoven, press wire holder to one side to release glass shield, change bulb and be sure to replace glass shield.

26

Care & Cleaning

To Remove and Replace Warmer Drawer (some models)

 

 

Latch

Left Glide

 

Pull up latch

 

with finger

 

 

 

Latch

 

Pull down latch

Right Glide

with finger

 

Fig. 1

 

To remove Warmer Drawer:

1.Turn power off before removing the warmer drawer.

2.Open the drawer to the fully opened position.

3.Locate the latches on both sides of the warmer drawer.

4.Pull up on the left glide latch and push down on the right glide latch.

5.Pull the drawer away from the range.

6.To clean warmer drawer, gently scour with a soapy scouring pad, this will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-soakedpaper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth. Remove all cleaners or the porcelain may become damaged during future heating. DO NOT use spray oven cleaners on the cooktop.

To Replace Warmer Drawer:

1.Align the glide latches on both sides of the drawer with the slots on the drawer.

2.Push the drawer back into the range.

Electrical Shock Hazardcan occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warmer drawer.

Storage Drawer with extendible glides (some models)

To remove Warmer Drawer:

1.Open the drawer to the fully opened position.

2.Locate the latches on both sides of the warmer drawer. (See Fig. 1)

3.Pull up on the left glide latch and push down on the right glide latch. (See Fig. 1)

4.Pull the drawer away from the range.

5.To clean warmer drawer, gently scour with a soapy scouring pad, this will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-soakedpaper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth. Remove all cleaners or the porcelain may become damaged during future heating. DO NOT use spray oven cleaners on the cooktop.

To Replace Warmer Drawer:

1.Align the glide latches on both sides of the drawer with the slots on the drawer.

2.Push the drawer back into the range.

Storage Drawer (some models)

Use the storage drawer for storing cooking utensils. The drawer can de removed to facilitate cleaning under the range. Use care when handling the drawer.

Removing and Replacing Storage Drawer

To remove the drawer:

1.Pull empty drawer out to the roller guide stop.

2.Tilt the drawer up and pull it out over the rollers.

To replace the drawer:

1.Insert the rear end of the drawer into the opening.

2.Fit the drawer end rollers onto the guide rails.

3.Push the drawer in until it stops, then lift to allow the rollers to clear the roller guide stop, and push in.

Roller Storage

Drawer

Roller

Guide

Front

Frame

Fig. 2

Adjusting Your Oven Temperature

For instructions on how to adjust the oven temperature refer to the electronic oven control guide.

27

Before you call

Solutions to Common Problems

Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. You will be charged for a service call while the appliance is in warranty if the problem is not caused by defective product workmanship or materials.

Your new appliance is a carefully engineered product. Many times, what appears to be a reason to call for service requires nothing more than a simple adjustment you can easily make in your own home or is normal operating characteristic of appliance under certain conditions.

This list is applicable to a variety of models; some of the items will not necessarily apply to your appliance.

OCCURRENCE

POSSIBLE CAUSE/SOLUTION

 

Range is not level.

(1) Poor installation. Place oven rack in center of oven. Place a level on the oven rack.

 

Adjust leveling legs at base of range until the rack is level. When range is level, cooktop

 

may appear out of alignment if countertop is not level. (2)Weak, unstable floor. Be sure

 

floor is level and can adequately support range. Contact a carpenter to correct sagging or

 

sloping floor. (3)Kitchen cabinet misalignment may make range appear to be unlevel. Be

 

sure cabinets are square and have sufficient room for range clearance.

 

 

 

Cannot move appliance easily.

(1) Cabinets not square or are built in too tight. Contact a cabinet maker to correct the

Appliance must be accessible

problem. (2) Contact builder or installer to make appliance accessible. (3) Carpeting

for service.

interferes with range. Provide sufficient space so range can be lifted over carpet.

 

 

 

Entire range or oven does not

(1) Make sure cord/plug is tightly into outlet.(2)Service wiring is not complete.(3) Power

operate.

outage. Check house lights to be sure. Call your local electric company for service.

 

 

 

Oven control beeps and

(1) This oven is equipped with a state of the art electronic oven controller. Among the many

displays an F error code.

features is a full time oven circuit diagnostics system. The controller

 

constantly monitors the internal circuitry as well as several crucial oven circuits to insure

 

they are all operating correctly. If at any time one of these systems fails, the controller will

 

immediately stop the current operation and beep continuously (flashing an F error code in

 

the controller display window). (2) Electronic control has detected a fault condition. Press

 

STOP/CLEAR to clear the display and stop the beeping. Reprogram oven. If fault remains,

 

record fault number. Press STOP/CLEAR and contact authorized servicer.

 

 

 

Oven light does not work.

(1) Replace or tighten bulb. See Changing Oven Light in this owner’s Guide for instructions.

 

 

 

Surface unit does not heat.

(1) No power to the appliance. Check steps under “Entire Range or Oven Does Not Oper-

 

ate” in this Before you Call checklist. (2) Incorrect control setting. Make sure the correct

 

control is on for the surface unit to be used.

Surface units too hot or not hot enough.

(1) Incorrect control setting. Make sure the correct control is on for the surface unit to be used.(2) Lightweight or warped pans used. Use only flat, evenly balanced, medium or heavyweight cookware. Flat pans heat better than warped pans. Cookware materials and weight of the material affect heating.Heavy-andmediumweight pans heat evenly. Because lightweight pans heat unevenly, foods may burn easily.

Drip bowls are pitting or rusting.

(1) Foods with acids, such as tomatoes, if allowed to stand in/on bowls will cause corrosion. Remove and wash drip bowls as soon as possible after spillover.(2) Normal environment. Houses along sea coast are exposed to salt air. Protect bowls as much as possible from direct exposure to salt air.

Drip bowls turning color or distorted out of shape.

(1) Bottom surface of cookware extends beyond surface elements and touches cooktop surface. This can cause high enough temperatures to discolor the drip bowls. DO NOT use cookware of this type. Pan sizes should be matched to the size of the element. Replacement drip bowls may be purchased from your dealer.

Scratches or abrasions on

(1) Coarse particles such as salt or sand between cooktop and utensils can cause scratches.

cooktop surface.

Be sure cooktop surface and bottoms of utensils are clean before usage. Small scratches do

 

not affect cooking and will become less visible with time. (2) Cleaning materials not recom-

 

mended for ceramic-glasscooktop have been used. See “Cooktop Cleaning - Ceramic Glass

 

Cooktop Models” section under General Cleaning. (3) Cookware with rough bottom has been

 

used. Use smooth, flat-bottomedcookware.

 

28

 

 

Before you call

 

 

 

 

 

 

 

 

Solutions to Common Problems

 

 

 

 

 

 

 

 

 

 

OCCURRENCE

POSSIBLE CAUSE/SOLUTION

 

 

 

 

Metalmarks.

(1) Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on

 

 

cooktop surface. Use a ceramic-glasscooktop cleaning cream to remove the marks. “Cooktop

 

 

Cleaning - Ceramic Glass Cooktop Models” section under General Cleaning.

 

 

 

 

Brown streaks or specks.

(1) Boilovers are cooked onto surface. Use razor blade scraper to remove soil. “Cooktop

 

 

Cleaning - Ceramic Glass Cooktop Models” section under General Cleaning.

 

 

 

 

Areas of discoloration with

(1) Mineral deposits from water and food. Remove using aceramic-glasscooktop cleaning

metallic sheen.

cream. Use cookware with clean, dry bottoms.

 

 

 

 

Poor baking results.

(1) Many factors affect baking results. Make sure the proper rack position is used. Center

 

 

food in the oven and space pans to allow air to circulate. Allow the oven to preheat to the set

 

 

temperature before placing food in the oven. Try adjusting the recipe's recommended tem-

 

 

perature or baking time. If you feel the oven is too hot or cool, see “Adjusting Oven Tem-

 

 

perature” in the Electronic Oven Control guide.

 

 

 

Fan noise during cooking

(1) A cooling fan may automatically turn on and off to cool internal parts. It is normal, and the

operation.

fan may continue to run even after oven is turned off.

 

 

 

 

Flames inside oven or smok-

(1) Excessive spillovers in oven. Setself-cleancycle for a longer cleaning time.(2) Exces-

ing from vent.

sive spillovers in oven.This is normal, especially for pie spillovers or large amounts of grease

 

 

on the oven bottom. Wipe up excessive spillovers before starting the self-cleancycle. If

 

 

flames or excessive smoke are present, stop the self-cleancycle and follow the steps under

 

 

"Stopping or Interrupting the Self-CleaningCycle" in the Electronic Oven Control guide.

 

 

 

 

 

Oven smokes excessively during broiling.

(1) Make sure oven is opened toBroil Stop Position. (2) Meat too close to the element. Reposition the rack to provide proper clearance between the meat and the element. Preheat broil element. Preheat broil element for searing.(3) Grid on broiler pan wrong side up and grease not draining. Always place grid on the broiler pan with ribs up and slots down to allow grease to drip into pan.(4) Grease has built up on oven surfaces. Regular cleaning is necessary when broiling frequently. Old grease or food spatters cause excessive smoking.

Self-cleaningcycle does not(1) Self-cleaningcycle was interrupted. Follow steps under “Stopping or Interrupting the Selfwork. Cleaning Cycle” in the Electronic Oven Control Guide.(2) Control(s) not set properly. Follow

instructions under “Oven Cleaning” in the Electronic Oven Control Guide.

Soil not completely removed after self-cleaningcycle.

(1) Failure to clean bottom, front, top or oven, frame or door area outside oven seal. These areas are not in theself-cleaningarea, but get hot enough to burn on residue. Clean these areas before theself-cleaningcycle is started.Burned-onresidue can be cleaned with a stiff nylon brush and water or nylon scrubber. Be careful not to damage the oven seal.

Avoid Transportation Damage to your Range

If you have to move your range into/out of your residence or when moving to a new home, it is suggested that you take the following precautions:

1.Screw in the levelling legs under the range.

2.Remove the racks and other utensils from the oven, and from the lower drawer.

3.Use adhesive tape to firmly secure the door and the drawer to the side panels. Also attach the electric power cord in the same manner.

4.Use a two-wheeledtrolley with strap and fasten the range to it. Cover the appliance with a heavy blanket to prevent scratches and dents.

5.Avoid pulling or pushing the control panel when moving the appliance.

29

Warranty Information

RANGE WARRANTY

Your range is protected by this warranty

In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries, Inc. We authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by us or an authorized Electrolux Home Products North America servicer.In Canada, your appliance is warranted by Electrolux Canada Corp.

*NORMAL RESPONSIBILITIES OF THE CONSUMER

EXCLUSIONS

IF YOU NEED

SERVICE

This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:

1.Proper use of the appliance in accordance with instructions provided with the product.

2.Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in accordance with all local plumbing, electrical and/or gas codes.

3.Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house wiring.

4.Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it was shipped from the factory.

5.Damages to finish after installation.

6.Replacement of light bulbs and/or fluorescent tubes (on models with these features).

This warranty does not cover the following:

1.CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES

RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.

NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.

2.Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary household use. The consumer shall pay for such service calls.

3.Damages caused by services performed by servicers other than Electrolux Home Products North America or its authorized servicers; use of parts other than genuine Electrolux Home Products parts; obtained from persons other than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.

4.Products with original serial numbers that have been removed or altered and cannot be readily determined.

Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights.You may also have other rights that vary from state to state. Service under this warranty must be obtained by contacting Electrolux Home Products:

USA

Canada

This warranty only applies in the 50 states of the U.S.A., Puerto Rico,

1•800•944•9044

1•866•294•9911

and Canada. Product features or specifications as described or

Electrolux Home Products

Electrolux Home Products

illustrated are subject to change without notice. All warranties are

North America

North America

made by Electrolux Home Products North America, a division of White

P.O. Box 212378

802, boul. L’Ange-Gardien

Consolidated Industries, Inc. In Canada, your appliance is warranted

Augusta, GA 30917

L’Assomption, Québec

by Electrolux Canada Corp.

 

J5W 1T6

 

30