Friedrich PXSB26515-20-30 User Manual

Size:
328.08 Kb
Download

Model PXSBXXXXX

PXSB230/20/30 or PXSB26515/20/30

Installation Instructions

Electrical Sub-baseAssembly

For Use with PTAC and PTHP Models

Please read these instructions completely before attempting installation.

NOTE: These instructions apply to the installation of the Electrical Sub-baseassembly.

Contents:

1.Sub-baseAssembly

2.Side brackets, adjustable

3.Wire nuts (x 3)

4.#10 screws (x 4)

5.Installation instructions

NOTE: All electrical work must conform to local codes and ordinances, the national electrical code, ANSI/NFPA NO. 70-1993or current edition, and in Canada, the Canadian electrical code PART I, CSA STANDARDC22.1-1993or current edition.

Step 1. Disconnect ALL power to unit.

Step 2. UsingSub-baseas a guide, mark the location for the mounting holes (See Figure 2). Drill a

1/8” hole on each side of the Wall Sleeve.

Step 3. Side brackets can be attached to thesub-baseto cover the open space between the wall andsub-base.Bend the bracket to size. Slip the bracket inside thesub-baseand use the adjustable mounting hole to adjust fit against the wall. See Figure 3.

92011402_R00 Friedrich Air Conditioning Co. Page 1/5

10001 Reunion Place, Suite 500 / San Antonio, Texas 78216 (210) 546-0500 /(800)541-6645 /www.friedrich.com

Model PXSBXXXXX

PXSB230/20/30 or PXSB26515/20/30

Step 4. Route building power through knockouts provided for conduit connectors into junction box. See Figure 4.

Step 5. Remove Left access cover and connect building power wires to the receptacle wires using wire nuts and replace cover. See Figure 5.

Step 6. Using screws provided, attachedsub-baseto wall sleeve using the drilled holes from

Step2. Be careful not to over tighten screws.

Step 7. Adjust legs to level thesub-base.See Figure 6.

Step 8. Remove Right access cover. Push excess cord through opening on the right. Plug the power cord into the receptacle.Re-installaccess cover making sure cord is routed through notch insub-base.

Step 9.Re-connectpower to unit

92011402_R00 Friedrich Air Conditioning Co. Page 2/5

10001 Reunion Place, Suite 500 / San Antonio, Texas 78216 (210) 546-0500 /(800)541-6645 /www.friedrich.com

Model PXSBXXXXX

PXSB230/20/30 or PXSB26515/20/30

Figure 1

Figure 2

92011402_R00 Friedrich Air Conditioning Co. Page 3/5

10001 Reunion Place, Suite 500 / San Antonio, Texas 78216 (210) 546-0500 /(800)541-6645 /www.friedrich.com

Model PXSBXXXXX

PXSB230/20/30 or PXSB26515/20/30

Figure 3

Figure 4

92011402_R00 Friedrich Air Conditioning Co. Page 4/5

10001 Reunion Place, Suite 500 / San Antonio, Texas 78216 (210) 546-0500 /(800)541-6645 /www.friedrich.com

Model PXSBXXXXX

PXSB230/20/30 or PXSB26515/20/30

Figure 5

Figure 6

92011402_R00 Friedrich Air Conditioning Co. Page 5/5

10001 Reunion Place, Suite 500 / San Antonio, Texas 78216 (210) 546-0500 /(800)541-6645 /www.friedrich.com