Friedrich E S12 User Manual

Size:
8.93 Mb
Download

Installation and Operation Manual

Room Air Conditioners

 

C F

SYSTEM

FAN MODE

POWER

FAN SPEED

SCHEDULE

Standard Chassis Models

115-Volt: SS08, SS10, SS12, SS14, SM15208-230-Volt: SS12, SS15 , SM18 , SM21, SM24

SL 22, SL 24, SL 28, SL 36

115-Volt:YS10

208-230-Volt: E S12, E S15, YS12 , E M18 YM18, E M24, E L 36, YL 24

your unit to assure quiet operation, the greatest circulation of cool, dry air, and the most economic operation.

THANK YOU, on behalf of our entire company, for making such a wise purchase.

UL

MODEL NUMBER

AIR CONDITIONING CO. YS10N10

SAN ANTONIO, TEXAS SERIAL NUMBER

ASSEMBLED IN MEXICO LICY00008

Register your air conditioner

Model information can be found on the name plate behind the front cover.

Please c omplete and mail the owner registration card furnished with this product, or register online at www.friedrich.com.

For your future convenience, record the model information here.

MODEL NUMBER

SERIAL NUMBER

PURCHASE DATE

2

 

Table of Contents

Safety Precautions ...................................................................................................................................................................................................................

4

Unpacking Instructions.............................................................................................................................................................................................................

5

WARNING: Before Operating Your Unit ..................................................................................................................................................................................

6

Standard Filter Cleaning / Installation Instructions ..................................................................................................................................................................

7

Premium Carbon Filter Installation Instructions.......................................................................................................................................................................

8

Control Panel Operation .......................................................................................................

.................................................................................................. 9

New Kühl Control Options ......................................................................................................................................................................................................

10

Control Panel Operation Instructions ................................................................................................................................................................

................... 11

Remote Control Operation .....................................................................................................................................................................................................

20

Remote Effectiveness ............................................................................................................................................................................................................

20

..........................................................................................................................................................................................

22

Remote Thermostat ...............................................................................................................................................................................................................

22

Installation Instructions ..........................................................................................................................................................................................................

23

Standard Window Installation ................................................................................................................................................................................................

25

Cord Routing Change ............................................................................................................................................................................................................

34

Through-the-WallInstallation.................................................................................................................................................................................................

36

Final Inspection & Start-upChecklist.....................................................................................................................................................................................

40

Routine Maintenance .............................................................................................................................................................................................................

41

Service and Assistance .........................................................................................................................................................................................................

41

Available Accessories ............................................................................................................................................................................................................

41

Troubleshooting Tips..............................................................................................................................................................................................................

42

Addendum 1 ...........................................................................................................................................................................................................................

44

Warranty ................................................................................................................................................................................................................................

45

3

Safety Precautions

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is a safety Alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol with the word “WARNING” or “CAUTION”. These words mean:

WARNING

CAUTION

Indicates a hazard which, if not avoided, can result in severe personal injury or death and damage to product or other property.

Indicates a hazard which, if not avoided, can result in personal injury and damage to product or other property.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what will happen if the instructions are not followed.

NOTICE

Indicates property damage can occur if instructions are not followed.

WARNING

Refrigeration system under high pressure

Do not puncture, heat, expose to flame or incinerate.

Only certified refrigeration technicians should service this equipment.

R410A systems operate at higher pressures than R22 equipment. Appropriate safe service and handling practices must be used.

Only use gauge sets designed for use with R410A. Do not use standard R22 gauge sets.

4

Unpacking Instructions

STEP 1. Cut all 4 packing straps.

STEP 2. Remove wooden shipping bar dividers.

STEP 3. Remove top foam pads.

STEP 5.

Slide the foam front support forward

STEP 6.

Carefully lift decorative front box from foam front support

STEP 7.

Remove decorative front and set safely aside

STEP 4. Slowly remove outer box, careful not to loosen decorative front.

5

W ARN I N G: Before Operating Your Unit

WARNING

Electrical Shock Hazard

Make sure your electrical receptacle has the same configuration as your air conditioner’s plug. If different, consult a Licensed Electrician.

Do not use plug adapters.

Do not use an extension cord.

Do not remove ground prong.

Always plug into a grounded 3 prong oulet. Failure to follow these instructions can result in death, fire, or electrical shock.

M ake sure the wiring is adequate for your unit .

If you have fuses, they should be of the time delay type. Before you install or relocate this unit, be sure that the amperage rating of the circuit breaker or time delay fuse does not exceed the amp rating listed in Table 1.

DO N OT use an extension cord.

The cord provided will carry the proper amount of electrical power to the unit; an extension cord may not.

M ake sure that the receptacle is compatible with the air conditioner cord plug provided.

Proper grounding must be maintained at all times. Two prong receptacles

The grounded receptacle should meet all national and local codes and ordinances. You must use the three prong plug furnished with the air conditioner. Under no circumstances should you remove the ground prong from the plug.

NOTICE

Do not use the LCDI device as an ON/OFF switch.

Failure to adhere to this precaution may cause premature equipment malfunction.

Once plugged in, the unit will operate normally without the need to reset the LCDI device. If the LCDI device fails to trip when tested or if the power supply cord is damaged, it must be replaced with a new power supply cord from the manufacturer. Contact our Technical Assistance Line at (800) 541-6645.To expedite service, please have your model number available.

Table 1.

 

CIRCUIT RATING

REQUIRED

 

OR TIME DELAY

WALL

MODEL

FUSE

RECEPTACLE

 

AMP

VOLT

NEMA

 

 

NO.

 

 

 

 

 

SS08, SS10

 

 

 

 

SS12, SS14

15

125

5-15R

 

YS10, SM15

 

 

 

 

SS12, SS15

15

250

6-15R

 

SM18, SM21

 

SL22, SL24

 

 

 

 

SM24, SL28

 

 

 

 

ES12, ES15

20

250

6-20R

 

YS12

 

 

 

 

SL36, EM18

 

 

 

 

EM24, EL36

30

250

6-30R

 

YM18, YL24

 

 

 

 

 

 

 

 

 

Test the power cord

All Friedrich room air conditioners are shipped from the factory with a

Figure 1

Leakage Current Detection Interrupter (LCDI) equipped power cord. The

 

LCDI device on the end of the cord meets the UL and NEC requirements

 

for cord connected air conditioners.

 

To test your power supply cord:

 

1.Plug power supply cord into a grounded 3 prong outlet.

2.Press RESET (See Figure 1).

3.Press TEST, listen for click; the RESET button trips and pops out.

4.Press and release RESET (Listen for click; RESET button latches and remains in). The power cord is ready for use.

RESET

TEST

WARNING:

TEST BEFORE EACH USE!

1.PRESS REST BUTTON.

2.PLUG LCDI INTO POWER RECEPTACLE.

3.PRESS TEST BUTTON, RESET BUTTON SHOULD POP UP.

4.PRESS RESET BUTTON FOR USE.

DO NOT USE IF ABOVE TEST FAILS.

WHEN GREEN LIGHT IS ON. IT IS WORKING PROPERLY!

FRR072

6

Standard Filter Cleaning / Installation Instructions

STEP 1.

Figure 2

FRR071

Figure 3

FILTER

GRIP

HANDLE

FRR052

STEP 2.

NOTE:

Figure 4

FILTER

FILTER

GRIP

FRR047

STEP 3. Swing the front frame open. Clean the front frame by washing

Figure 5

A

TOP TAB

FRONT

FRAME WITH

STANDARD

MESH FILTER

FRR048

STEP 4.

NOTE:

the tab in the frame stops the handle from sliding in, slide the handle from the other direction. Do not force the handle into the frame.

STEP 5. the inside of the front door.

7

Premium Carbon Filter Installation Instructions

STEP 1.

STEP 4.

STEP 2.

NOTE:

in Figure 4.

STEP 3.

STEP 5.

 

as shown in Figure 6.

NOTE: Make sure the frame with the mesh is facing towards you.

and slide the assembly into the unit as per the instructions on the door.

NOTE:

 

the tab in the frame stops the handle from sliding in, slide the

 

handle from the other direction. Do not force the handle into

 

the frame.

Figure 6

Figure 7

 

FRONT FRAME WITH

 

MESH FILTER

FRR050

FRR051

8

Control Panel Operation

Let’s check out how to control your air conditioner. On the control panel, just above the POWER , is a liquid crystal display (LCD). All of the control panel function buttons and mode icons can be viewed in Figure 8.

Power On – Press the button to turn on the air conditioner. The power button illuminates to indicate that the power is on. The backlight on the power switch will automatically dim to 20% intensity after 15 seconds of inactivity. The remote control can also be used to turn power ON / OFF (See Remote Control).

Display

inactivity, the display dims to 20% intensity. After an additional 120 seconds, the display switches off. Touching any button automatically changes the display to full brightness.

There are three control push buttons on each side of the display.

Figure 8

 

SYSTEM

FAN MODE

Cycles between

Sets fan to either:

AUTO, HEAT,

- Cycle automatically

COOL, or FAN

- Run continuously

ONLY

 

(if equipped)

 

FAN SPEED

TEMPERATURE

TIMER / SCHEDULE

 

Sets fan speed:

Increment UP

Turns ON or OFF

 

LOW, MED,

TEMPERATURE:

IR WINDOW:

ON / OFF

HIGH or AUTO

(if equipped)

Increment DOWN

Do not block

Turns unit on/off

 

 

 

SYSTEM

 

 

F

FAN

 

 

 

MODE

 

 

 

 

 

SET POINT

FAN

AUTO SPEED

 

TIMER

SPEED

 

 

SCHEDULE

 

 

COOL HEAT FAN

CONTROL

MAINTENANCE

ONLY

LOCKED

REQUIRED

WI-FIOPERATING

(if equipped)

AUTO

Automatically switches between cool & heatAUTO

AUTO FAN

CONTINUOUS

FAN SPEED

Selected fan speed AUTO SPEED

AUTO SPEED

Automatically selects best fan cooling speed

 

WAIT

F

 

2 DIGIT DISPLAY

C

 

Shows Setting for:

AM

 

- Set Point (Temperature)

 

- Room Temperature

PM

 

 

- Clock (AM/PM)

 

 

SET POINT

ON OFF

SCHEDULE

ROOM TEMP

 

 

SCHEDULE ON

 

 

CHECK $MART

 

 

 

FILTER

 

 

 

TIMER ON

 

 

 

FILTER

 

MART OPERATING

$

Check / Clean

(if equipped)

9

Kühl Control Options

The Kühl gives you a variety of options for control, programming, and scheduling including wireless capabilities

Wireless Programming and Control:

.The new FriedrichLink™ Adapter (sold seperately) allows you to conviently control, program and monitor your air conditioning unit remotely from a smartphone or computer.

FriedrichLink™ Adapter accessory available through Friedrich authorized retailers or www.friedrich.com. See FriedrichLink™ Adapter section on www.friedrich.com for complete details.

Pre-ProgrammedScheduling Options:

Your unit’s digital control comes equipped with a 24-hourtimer and two preprogrammed7-dayenergy management options.

24-HourTimer

The 24-hourtimer allows you to turn the unit off and on atpre-settimes by setting an on and off time on the unit control panel. (See page 12 for details on timerset-up.)

Pre-programmedEnergy Management

Your unit comes from the factory with two (2) Pre-programmedEnergy Management settings are shown in Addendum 1 (Residential & Commercial Schedule Table).

Energy Management Schedule Options are:

1.Residential Schedule – 40 Hr. Work Week

2.Commercial Schedule – 5-DayBusiness Week

The “Residential” (40 Hr. Work Week) Schedule has four (4) time periods: 06:00, 08:00, 18:00, and 22:00. This option will cause your Kühl Q unit to raise the room temperature temporarily to 85°F during the hours when most people are away at work, lower them again to 78°F prior to the time when most people will return home, and then raise slightly to 82°F to maintain a comfortable temperature overnight.

The “Commercial” (5-DayBusiness Week) Schedule has two (2) time periods: 07:00 and 18:00. This option will cause your air conditioner to raise temperatures to 84°F after typical working hours and on weekends when commercial spaces are typically unoccupied.

(See Control Panel Operation Instructions Section)

Customizable Programming Options:

Customizable schedules, with up to four temperature adjustments per day, can either be uploaded to the unit via the air conditioner’s built-inmicro USB interface or conveniently transmitted wirelessly using the new FriedrichLink™ Adapter accessory, greatly simplifying the programming of one or multiple units.

See Figure 9.

See www.friedrich.com for complete Customizable Programming instructions.

Figure 9

UL

FriedrichLink™ Adapter

10