Franklin RK-8201 User Manual

Size:
91.19 Kb
Download

RK-8201

E-ZFile

User’s Guide

www.franklin.com

License Agreement

READ THIS LICENSE AGREEMENT BEFORE USING THE ELECTRONIC REFERENCE. YOUR USE OF THE ELECTRONIC REFERENCE DEEMS THAT YOU ACCEPT THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THESE TERMS, YOU MAY RETURN THIS PACKAGE WITH PURCHASE RECEIPT TO THE DEALER FROM WHICH YOU PURCHASED THE ELECTRONIC REFERENCE AND YOUR PURCHASE PRICE WILL BE REFUNDED. ELECTRONIC REFERENCE means the software product and documentation found in this package and FRANKLIN means Franklin Electronic Publishers, Inc.

Limited Use License

All rights in the ELECTRONIC REFERENCE remain the property of FRANKLIN. Through your purchase, FRANKLIN grants you a personal and nonexclusive licensed to use this ELECTRONIC REFERENCE. You may not make any copies of the ELECTRONIC REFERENCE or of the data stored therein, whether in electronic or print format. Such copying would be in violation of applicable copyright laws. Further, you may not modify, adapt, disassemble, decompile, translate, create derivative works of, or in any way reverse engineer the ELECTRONIC REFERENCE. You may not export or reexport, directly or indirectly, the ELECTRONIC REFERENCE without compliance with appropriate governmental regulations. The

2

ELECTRONIC REFERENCE contains Franklin’s confidential and proprietary information which you agree to take adequate steps to protect from unauthorized disclosure or use. This license is effective until terminated. This license terminates immediately without notice from FRANKLIN if you fail to comply with any provision of this license.

Notice

The manufacturer strongly recommends that separate permanent written records be kept of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, the manufacturer assumes no responsibility for data lost or otherwise rendered unusable whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired, or any other cause.

The manufacturer assumes no responsibility, directly or indirectly, for financial losses or claims from third parties resulting from the use of this product and any of its functions, such as stolen credit card numbers, the loss or alteration of stored data, etc.

The information provided in this manual is subject to change without notice.

Cautions

Do not carry the organizer in the back pocket of your slacks or trousers.

Do not drop the organizer or apply excessive force to it.

Do not subject the organizer to extreme temperatures.

Clean only with a soft, dry cloth.

Since this product is not waterproof, do not use it or store it where fluids can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also cause the organizer to malfunction.

Getting Started

The first time you use this organizer, you should perform a system reset. Pressing the reset button with more than light pressure may permanently disable your organizer. Warning! A system reset erases any userentered information and clears all settings.

1.Turn the organizer over and carefully pull the battery insulation sheet to remove it.

2.Press to turn the organizer off.

3.Use a paper clip to gently press the reset button on the back of the organizer. The Reset button is accessed via the hole to the left of the battery door on the back of the unit.

4.Press Y to reset the organizer.

 

Key Guide

Function Keys

 

Turns the unit on and off.

 

Displays the time and date.

ABC

Goes to the Contacts directory.

 

Goes to the Memo directory.

CALC

Goes to the Calculator.

EDIT

Edits selected data.

SPACE

Types a space.

NEW

Starts a new record.

SAVE

Saves the current record or

 

settings.

VIEW/NEXTGoes to the next field in a record or next setting in a menu.

Moves the cursor right or left.

Moves up or down through records in viewing mode.

Shifted Keys

Press SHFT first and then press a key within two seconds to access the function printed above the key. If you take too long to press another key, you may be required to pressSHFT again.

SHFT +

EDIT (DEL)

SHFT +

SPACE (SYSTEM)

SHFT +

NEW (INS)

SHFT +

Q-P(1-0)

Enables you to delete a record or disable a setting.

Goes to the System menu.

Enables you to insert a character at the cursor.

Enters numbers 1-0.

You can enter the following symbols by first pressing SHFT and then the letter above which they are printed: _, \, .,, @, #, /, $, (, ), &, :, and—.

Changing System Settings

Press SHFT and then pressSPACE (SYSTEM) to access the System menu. System settings appear in the following order when you pressVIEW/NEXT repeatedly:DATE FMT?,

12H TIME?, ALARM?, KEYTONE?, SET CODE?, LANGUAGE?. You can change either a single setting or multiple settings at a time.

Press ,ABC orto exit the System menu.

Setting Date and Time Formats

1.Press SHFT and then press

SPACE (SYSTEM).

The date format screen appears.

2.Press Y to edit the date format.

The default setting is MM/DD/YYYY.

Press N to keep the default setting and go to the time format screen.

You can also press VIEW/NEXT to go to the time format screen.

3.Press N to toggle between

MM/DD/YYYY? and DD/MM/YYYY?.

4.Press Y when you see the one you want.

The time format screen appears. The default setting is a 12-hourclock.

5.Press N to toggle between12H TIME? and24H TIME?.

6.Press Y when you see the one you want. The alarm screen appears.

Setting the Daily Alarm

1.Press SHFT and then press

SPACE (SYSTEM).

2.Press VIEW/NEXT until you seeALARM?.

3.Press Y to set the alarm.

If no alarm has been previously set, you see HH:MM.

A/P appears for the12-hourclock setting.

4.Enter a time for the alarm. For example, type 0730.

In the 12-hourclock, pressA orP for a.m. or p.m.

5.Press SAVE to save the alarm setting. The keytone screen appears.

Changing the Daily Alarm

1.Press SHFT and then press

SPACE (SYSTEM).

2.Press VIEW/NEXT until you seeALARM?.

3.Press Y to change the alarm.

The current alarm setting appears on the screen.

4.Press EDIT.

HH:MM appears on the screen.

5.Enter a new time for the alarm.

6.Press SAVE to save the new alarm setting.

The keytone screen appears.

Turning Off the Daily Alarm

1.Press SHFT and then press

SPACE (SYSTEM).

2.Press VIEW/NEXT until you seeALARM?.

3.Press Y to see the current alarm setting. The current alarm setting appears on the screen.

4.Press SHFT and then pressEDIT (DEL).DELETE? Y/N appears on the screen.

5.Press Y to delete the alarm setting.DELETED! flashes on the screen. The keytone screen appears.

Press N to exit without changing the alarm setting.

Shutting Off the Alarm

When the alarm goes off, it will beep for 30 seconds. Press any key to shut off the

alarm. If you press

, ABC ,

or

CALC you go to that mode. If you press any other key you go back to the time mode. If no key is pressed, the unit will automatically shut off after 60 seconds.

Setting the Keytone

The keytone is the beep that sounds when any key is pressed. The default setting is active. To turn the keytone off, do the following.

1.Press SHFT and then press

SPACE (SYSTEM).

2.Press VIEW/NEXT until you see

KEYTONE?.

3.Press N to deactivate the keytone.

To reactivate the keytone, press Y at theKEYTONE? screen. The set code screen appears.

Setting a Passcode

You can lock your organizer by setting a passcode. Once you activate your passcode, you will be required to enter it each time you turn on your unit.

Warning! Please write down your passcode and keep it in a safe location. If you forget your passcode or enter the wrong passcode you will not be able to use your organizer. In order to access your organizer, you will have to perform a system reset, which will

clear the passcode but will also erase all the data stored in memory. To prevent loss of data, please keep written records of your data. To learn how to perform a system reset, please read “Getting Started.”

1.Press SHFT and then press

SPACE (SYSTEM).

2.Press VIEW/NEXT until you see

SET CODE?.

3.Press Y.

CODE #?____ appears on the screen.

4.Enter a four-digitpasscode.

5.Press SAVE to save your passcode.

The language screen appears.

Changing a Passcode

1.Press SHFT and then press

SPACE (SYSTEM).

2.Press VIEW/NEXT until you see

SET CODE?.

3.Press Y.

CODE #?____ appears on the screen. PressN to exit without changing your passcode.

4.Enter your existing passcode.

5.Press EDIT.

CODE #?____ appears on the screen.

6.Enter a new passcode.

7.Press SAVE to save the new passcode. The language screen appears.

Deleting a Passcode

1.Press SHFT and then press

SPACE (SYSTEM).

2.Press VIEW/NEXT until you see

SET CODE?.

3.Press Y.

CODE #?____ appears on the screen.

4.Enter your existing passcode.

5.Press SHFT and then pressEDIT (DEL).DELETE? Y/N appears on the screen.

6.Press Y to delete the passcode.DELETED! flashes on the screen. PressN to exit without deleting your passcode.

The language screen appears.

Selecting a Language

You can change the language of the screen prompts and menus. There are five languages that appear in the following order:

ENGLISH?, ESPAÑOL?(Spanish), FRANÇAIS?(French), DEUTSCH?

(German) and ITALIANO? (Italian). English is the default language. To select a different language, do the following.

1.Press SHFT and then pressSPACE (SYSTEM).

2.Press VIEW/NEXT until you see

LANGUAGE?.

3.Press Y.

ENGLISH? appears on the screen.

4.Press VIEW/NEXT to cycle through the available languages.

5.When you see the language you want, press SAVE to select it.

The date format screen appears in the selected language.

Setting the Time and Date

There are two fields in the Time/Date screen: date and time. Note: the format for the time and date displays is set in the System menu. A blinking cursor marks the spot where the character you enter will be placed.

1.Press .

If no time has been previously set, 12:00 A (12-Hclock) or00:00 (24-Hclock) appears.

2.Press EDIT.

The first digit blinks.

3.Enter the time and press A orP for a.m. or p.m(12-hourclock only). For example, enter0900.

You need not press SHFT before pressing a number key. Numbers are autoshifted here.

Use to move the flashing cursor left or right.

If you do not wish to set the date at this time, press SAVE.

4.Press VIEW/NEXT to set the date.

If no date has been previously set, the display reads 01/01/2004.

The first digit blinks.

5.Enter the date. For example, type

05282003.

6.Press SAVE to save the current date and time.

The time is displayed.

7.Press VIEW/NEXT to view the date.

Using the Contacts Directory

Each Contacts record has seven fields that appear in the following order: NAME?,

ADDRESS?, E-MAIL?, HOME#?, WORK#?,

CELL#?,FAX#?. You can enter a maximum of 36 characters in all fields exceptADDRESS? andE-MAIL?.A maximum of 48 characters can be entered in these two fields.

to the left of the screen indicates the active line.

Arrows to the right of the screen indicate which arrow keys you can press to move around the screen.

The alphabet tabs at the top of the screen function like tabs in a telephone directory and indicate the letter currently being searched, if any.

The labels at the bottom of the screen indicate the active field.

Entering a Contact

1.Press ABC .

NAME? appears on the screen.

This is the default screen each time you turn the unit on.

2.Press NEW.

appears to the left of the screen and a flashing cursor appears on the first line. Each letter you enter is inserted in the spot marked by the flashing cursor.

3.Enter the full name of the contact you want to add.

Note: You must enter a name if you wish to save the entry.

You can also enter a name first and then press NEW.

Note: The first character in theNAME? field cannot be a symbol. It must be a letter or a number.

Press SHFT and useQ-P to enter numbers.

Use to move the flashing cursor left or right.

4.Press VIEW/NEXT to move to each consecutive field and enter data in the fields you want.

When data exceeds the length of the screen, characters scroll off the screen to the left.

Press to view those characters.

You need not enter data in every field. After the last field, pressing VIEW/NEXT takes you back to theNAME? field.

5.Press SAVE at any time to save the record.

The amount of memory used appears on the screen.

NAME? appears on the screen.

Viewing Contacts

There are two ways to search for a contact’s information. The first is by entering letters at the NAME? screen and searching for a matching record.

The second is by using the letter tabs at the top of the screen. Read the following to learn how to use these two methods.

Using Letters or Numbers

1.Press ABC .

2.Type one or more characters of the name you want.

3.Press VIEW/NEXT to start the search.

If a matching record is found, then the Name and Home phone number are displayed.

If no matching record is found, then the message “NOT FOUND” flashes and you return to the NAME? screen.

Press to scroll up and down through the records that match your search.

4.Press VIEW/NEXT to cycle through the fields of the record you want.

Only fields with data in them are displayed.

When the data exceeds the length of the screen, use to scroll left or right to read the rest of the data. Press and holdto scroll to the left or right.

5.Press ABC to exit that record.

NAME? appears on the screen.

Using the Letter or # Tabs

1.Press ABC .

NAME? appears on the screen.

2.Press to scroll through the letter tabs until you reach the one you want.

3.Press VIEW/NEXT.

The first record starting with that letter is displayed.

If no entry exists for the selected letter, the message “NOT FOUND!” flashes on the screen and you return to the NAME? screen.

If you entered numbers in the NAME? field instead of letters, select #.

4.Press to see other records. Follow Steps 4 and 5 above to view the fields of the record you want.

Editing a Contact Record

1.Find the record you want to edit using one of the methods above.

2.Press EDIT.

The first character of the name field blinks.

3.Press VIEW/NEXT repeatedly to find the field you want.

As the unit is now in Edit mode, all fields are displayed.

The labels at the bottom of the screen indicate the field currently being displayed.

4.Enter your edits.

Use to move the blinking cursor right or left.

Press SHFT and then pressNEW (INS) to insert one character before the blinking character.

5.Press SAVE at any time to save your changes.

The amount of memory used appears on the screen.

NAME? appears on the screen.

Deleting a Contact Record

1.Find the record you want to delete.

2.Press SHFT and then pressEDIT (DEL).DELETE? Y/N appears on the screen.

3.Press Y to delete the record.DELETED! flashes on the screen. PressN to cancel the deletion.

NAME? appears on the screen.

Using the Memo Directory

Each Memo record consists of four fields that appear in the following order: MEMO?,

MM/DD/YYYY, HH:MM A/P, ANNUAL? Y/N. You can enter a maximum of 48 characters in the first field. You can set a memo alert for each memo. To do so, simply set an hour and date when the memo is due. When the clock reaches that time and date, the alert will sound.

Memos are stored in chronological order from the oldest to the newest.

Entering a Memo

1.Press .

MEMO? appears on the screen.

2.Press NEW.

A flashing cursor appears on the first line. Each letter or number you enter is inserted in the spot marked by the flashing cursor.

3.Enter your memo.

You can also enter a memo first and then press NEW.

Note: The first character in theMEMO? field cannot be a symbol. It must be a letter or a number.

Press SHFT and useQ-P to enter numbers.

Use to move the flashing cursor left or right.

Once the data exceeds the length of the screen, letters scroll off the screen to the left.

4.Press VIEW/NEXT to move to each consecutive field.

You can enter a date and time when to be reminded about the memo. You can also choose to be reminded annually for events such as birthdays, anniversaries etc. When you set the time, the alert is activated.

You need not enter data in every field.

5.Press SAVE at any time to save the record.

Note: If you do not assign a date and time for a memo, the currrent date and time will be automatically assigned.

MEMO? appears on the screen.

Viewing Memos

1.Press .

2.Press to scroll through your memos.

You can also type the first few letters of the memo you’re looking for and then press VIEW/NEXT. The first memo starting with the letters you entered is displayed.

If no matching record is found, then the message “NOT FOUND!” flashes and you return to the MEMO? field.

3.Press VIEW/NEXT to cycle through the fields in the record you want.

If any field contains more than 12 characters, use to scroll left or right to read the rest of the data. Press and holdto scroll to the left or right.

4.Press to exit that record.

MEMO? appears on the screen.

Editing a Memo

1.Find the memo you want to edit using the steps above.

2.Press EDIT.

The first character in the memo field blinks.

3.Press VIEW/NEXT repeatedly to find the field you want to edit.

4.Enter your edits in the field you want.

Use to move the blinking cursor left or right.

Press SHFT and then pressNEW (INS) to insert one character before the blinking character.

5.Press SAVE at any time to save your changes.

The amount of memory used appears on the screen.

MEMO? appears on the screen.

Deleting a Memo

Note: You can only delete a memo from theMEMO? field.

1.Find the memo you want to delete.

2.Press SHFT and then pressEDIT (DEL).DELETE? Y/N appears on the screen.

3.Press Y to delete the record.DELETED! flashes on the screen. PressN to cancel the deletion.

MEMO? appears on the screen.

Memo Alerts

The memo alert sounds for 30 seconds. Press any key to shut off the alarm.

If the unit is on, the alarm sounds and the memo you are being reminded of is displayed. The memo remains on the screen even after the alarm shuts off.

If the unit is off, it is turned on automatically and the alarm sounds. If no other key is pressed for 60 seconds the unit shuts off. The next time the unit is turned on, the mes-

sage CHECK MEMOS appears. Pressand then pressVIEW/NEXT to locate the memo you missed.

Using the Calculator

1.Press CALC.

2.Type a number.

You can type up to 10 digits. To type a decimal, press J(.).

All numbers and math functions are automatically active in the calculator. You do not have to press SHFT to enter a number or function.

3.Press D(+),F(—),G(x),H(÷) to add, subtract, multiply, or divide, respectively.

4.Type another number.

5.Press L(=) to do the calculation.

Or press K(%) to calculate the percentage.

6.Press EDIT orCALC to clear the calculator.

Replacing the Battery

This organizer uses one CR-2032lithium battery. Replace the battery as soon as the display begins to dim. Please have a small Phillips screwdriver and the new battery at hand before you follow the steps below.

Warning! When changing the battery, make sure the device is not on a hard surface. Ifis pressed accidentally, your data will be lost.

Warning! When no battery is installed, this organizer will save your information for only a few seconds. So install the new battery quickly when you remove the old one.

1.Turn the organizer off and turn it over.

2.With the Phillips screwdriver, remove the screw to the battery cover and then remove the cover.

Do not remove the screws at the sides of the organizer.

3.Remove the old battery and quickly replace it with the new battery with the positive (+) side facing up.

4.Replace the battery cover.

Warning! This organizer stores your information as long as the battery supplies power. If the battery loses power or is removed, all your information will be lost. Always keep written copies of your important information in case it is corrupted or lost.

Specifications

Model: RK-8201E-Z File

Size: 10.6 X 8.52 X 1.19 cm

Weight: 2.5 oz

Battery: 1-CR-2032Lithium

Storage Capacity: 8 KB ISBN: 1-59074-201-X

Cleaning this Product

To clean this product, spray a mild glass cleaner onto a cloth and wipe its surface. Don’t spray liquids directly onto the unit.

Don’t use or store your organizer in extreme or prolonged heat, cold, humidity, or other adverse conditions.

FOR HOME OR OFFICE USE

Customer Support (609) 386-8997.

Copyrights and Trademarks

© 2003 Franklin Electronic Publishers, Inc., Burlington, N.J. 08016-4907USA. All rights reserved.

ROLODEX® is a registered trademark of Berol Corporation, a subsidiary of Newell Rubbermaid, Inc.

This unit may change operating modes due to Electro-staticDischarge. Normal operation of this unit can bere-establishedby pressing the reset key,or by removing/replacing batteries.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:–Reorientor relocate the receiving antenna.–Increasethe separation between the equipment

and receiver.

–Connectthe equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consultthe dealer or an experienced radio/TV technician for help.

NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure compliance.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Limited Warranty (U.S. only)

LIMITED WARRANTY, DISCLAIMER OF WARRANTIES AND LIMITED REMEDY

(A) LIMITED WARRANTY. FRANKLIN WARRANTS TO THE ORIGINAL END USER THAT FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AS EVIDENCED BY A COPY OF YOUR RECEIPT, YOUR FRANKLIN PRODUCT SHALL BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP. THIS LIMITED WARRANTY DOES NOT INCLUDE DAMAGE DUE TO ACTS OF GOD, ACCIDENT, MISUSE, ABUSE, NEGLIGENCE, MODIFICATION, UNSUITABLE ENVIRONMENT OR IMPROPER MAINTENANCE. THE SOLE OBLIGATION AND LIABILITY OF FRANKLIN, AND YOUR EXCLUSIVE REMEDY

UNDER THIS LIMITED WARRANTY, WILL BE REPAIR OR REPLACEMENT WITH THE SAME OR AN EQUIVALENT PRODUCT OF THE DEFECTIVE PORTION OF THE PRODUCT, AT THE SOLE OPTION OF FRANKLIN IF IT DETERMINES THAT THE PRODUCT WAS DEFECTIVE AND THE DEFECTS AROSE WITHIN THE DURATION OF THE LIMITED WARRANTY. THIS REMEDY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY. THIS WARRANTY GIVES YOU CERTAIN RIGHTS; YOU MAY ALSO HAVE OTHER LEGISLATED RIGHTS THAT MAY VARY FROM JURISDICTION TO JURISDICTION.

(B) DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY. EXCEPT FOR THE LIMITED WARRANTIES EXPRESSLY RECITED ABOVE, THIS FRANKLIN IS PROVIDED ON AN “AS IS” BASIS, WITHOUT ANY OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABLE QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THOSE ARISING BY LAW, STATUTE, USAGE OF TRADE, OR COURSE OF DEALING. THIS WARRANTY APPLIES ONLY TO PRODUCTS MANUFACTURED BY FRANKLIN AND DOES NOT INCLUDE BATTERIES, CORROSION OF BATTERY CONTACTS OR ANY OTHER DAMAGE CAUSED BY BATTERIES. NEITHER FRANKLIN NOR OUR DEALERS OR SUPPLIERS SHALL HAVE ANY LIABILITY TO YOU OR ANY OTHER PERSON OR ENTITY FOR ANY INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMIT-

ED TO, LOSS OF REVENUE OR PROFIT, LOST OR DAMAGED DATA OR OTHER COMMERCIAL OR ECONOMIC LOSS, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR THEY ARE OTHERWISE FORESEEABLE. WE ARE ALSO NOT RESPONSIBLE FOR CLAIMS BY A THIRD PARTY. OUR MAXIMUM AGGREGATE LIABILITY TO YOU, AND THAT OF OUR DEALERS AND SUPPLIERS, SHALL NOT EXCEED THE AMOUNT PAID BY YOU FOR THE FRANKLIN PRODUCT AS EVIDENCED BY YOUR PURCHASE RECEIPT. YOU ACKNOWLEDGE THAT THIS IS A REASONABLE ALLOCATION OF RISK. SOME STATES/COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IF THE LAWS OF THE RELEVANT JURISDICTION DO NOT PERMIT FULL WAIVER OF IMPLIED WARRANTIES, THEN THE DURATION OF IMPLIED WARRANTIES AND CONDITIONS ARE LIMITED TO THE DURATION OF THE EXPRESS WARRANTY GRANTED HEREIN.

(C) WARRANTY SERVICE: UPON DISCOVERING A DEFECT, YOU MUST CALL FRANKLIN’S CUSTOMER SERVICE DESK, 1-800-266-5626, TO REQUEST A RETURN MERCHANDISE AUTHORIZATION (“RMA”) NUMBER, BEFORE RETURNING THE PRODUCT (TRANSPORTATION CHARGES PREPAID) TO:

FRANKLIN ELECTRONIC PUBLISHERS, INC. ATTN: SERVICE DEPARTMENT

ONE FRANKLIN PLAZA BURLINGTON, NJ 08016-4907

IF YOU RETURN A FRANKLIN PRODUCT, PLEASE INCLUDE A NOTE WITH THE RMA, YOUR NAME, ADDRESS, TELEPHONE NUMBER, A BRIEF DESCRIPTION OF THE DEFECT AND A COPY OF YOUR SALES RECEIPT AS PROOF OF YOUR ORIGINAL DATE OF PURCHASE. YOU MUST ALSO WRITE THE RMA PROMINENTLY ON THE PACKAGE IF YOU RETURN THE PRODUCT, OTHERWISE THERE MAY BE A LENGTHY DELAY IN THE PROCESSING OF YOUR RETURN. WE STRONGLY RECOMMEND USING A TRACKABLE FORM OF DELIVERY TO FRANKLIN FOR YOUR RETURN.

Limited Warranty (EU and

Switzerland)

This product, excluding batteries and liquid crystal display (LCD), is guaranteed by Franklin for a period of two years from the date of purchase. It will be repaired or replaced with an equivalent product (at Franklin’s option) free of charge for any defect due to faulty workmanship or materials. Products purchased outside the European Union and Switzerland that are returned under warranty should be returned to the original vendor with proof of purchase and description of fault. Charges will be made for all repairs unless valid proof of purchase is provided.

This warranty explicitly excludes defects due to misuse, accidental damage, or wear and tear. This guarantee does not affect the consumer’s statutory rights.

Limited Warranty (outside U.S.,

EU and Switzerland)

This product, excluding batteries and liquid crystal display (LCD), is guaranteed by Franklin for a period of one year from the date of purchase. It will be repaired or replaced with an equivalent product (at Franklin’s option) free of charge for any defect due to faulty workmanship or materials.

Products purchased outside the United States, the European Union and Switzerland that are returned under warranty should be returned to the original vendor with proof of purchase and description of fault. Charges will be made for all repairs unless valid proof of purchase is provided.

This warranty explicitly excludes defects due to misuse, accidental damage, or wear and tear. This guarantee does not affect the consumer’s statutory rights.

RKP-28000-00

Rev. C