FoodSaver V1505, GameSaver Pro User Manual

0 (0)
FoodSaver V1505, GameSaver Pro User Manual

QS.1505_GSpro_v3 6/29/04 11:13 AM Page 1

QuickStart

V1505/GameSaver Pro

Shown V1505; GameSaver Pro operates in the same manner.

Features of Your FoodSaver Appliance

For important safety information and helpful tips, please refer to the FoodSaver Reference Guide included in your kit. Questions? Visit us at www.foodsaver.com or call 1-800-777-5452 (U.S.) or 1-877-804-5383 (Canada). Get tips on vacuum packaging and order FoodSaver accessories.

AAccessory Hose Storage Accessory Hose

Cancel Button Instant Seal Button

Seal Control Switch

(5-Position)

Indicator Light Pulse Button Accessory Port

J Roll Storage

Features

 

Compartment

 

Removable

 

Vacuum Channel

 

Rubber Gasket

 

Sliding Door to

 

Vacuum Channel

 

Set Seal Control Switch
Place Bag in Vacuum Channel
How to Vacuum Package with FoodSaver Bags
Press and Release Lid

QS.1505_GSpro_v3 6/29/04 11:13 AM Page 2

Getting Started

Registering your appliance is quick and easy at www.foodsaver.com.

How to Make a Bag from a FoodSaver Roll

Pull Out Bag Material

Set Seal Control Switch

Press and Release Lid

1.Open appliance lid and place roll into Roll Storage Compartment (J).

2.Pull out enough bag material to hold item to be vacuum packaged, plus 3 inches. Close lid.

3.Turn Seal Control Switch (E) to Seal Only.

4.Press down firmly on lid with both hands until motor starts, then release lid. Motor and Indicator Light (F) will turn on as bag material is sealing.

5.

Rolls&

When motor and light turn off, cut bag material by

 

pressing down lightly on lid and sliding Bag Cutter

 

(I) from one end of sliding channel to other end.

6.

Open lid, remove bag, and tuck roll back into Roll

 

Storage Compartment before vacuum packaging.

Now you are ready to vacuum package with your new bag (see below).

1.Place item(s) in bag, allowing at least 3 inches of space between bag contents and top of bag.

2.Open appliance lid and place open end of bag down into Vacuum Channel (K). Make sure roll material is tucked backed into Roll Storage Compartment (J) or it could prevent the appliance from operating properly.

3.Close lid.

4.Set Seal Control Switch (E) to:

2to vacuum package using FoodSaver bags (medium seal time).

3to vacuum package moist and juicy foods such as raw meat (longer seal time).

5. To begin vacuum process, press down firmly

on lid with both hands until motor starts, then release. Motor will continue to run.

6. When motor and Indicator Light (F) turn off, vacuum process is complete. Open lid and remove bag. Refrigerate or freeze if needed. (See FoodSaver Reference Guide for food safety tips.)

Note: This appliance features a heavy-duty Sealing Strip (N) that can perform 50 consecutive seals without overheating.

Bags

Loading...
+ 4 hidden pages