First Alert 2084DF, 2118DF, 2054DF User Manual

0 (0)
First Alert 2084DF, 2118DF, 2054DF User Manual

Operation & Installation Guide

MFFS2054DF84DF18DFE0809

ENGLISH

Model 2054DF

Model 2084DF

Model 2118DF

DIGITAL

Read These Instructions Very Carefully!

Home and Office Security Safes

Index

Overview of Your Safe .............................................

Page 1

Programming Preparation .......................................

Page 2

Step 1. Installing Batteries

 

Step 2. Opening Safe with Override Key

 

Programming a Passcode .........................................

Page 3

LCD Display Menu

 

Step 3. Programming a Passcode

 

Opening & Closing Digital Safe ...............................

Page 4

Open Safe with Passcode & Key

 

Close Safe

 

Open Safe with Override Key

 

Additional Features: Shelves....................................

Page 5

Additional Features: Bolt-Down Kit .........................

Page 6

Consumer Affairs ...................................................

Page 8

Use, Care and Maintenance .....................................

Page 10

For Your Protection

Do not remove the Serial Number tag from the safe.

Store Emergency Override Keys away from (NEVER INSIDE) safe.

Record all Safe Identification Numbers on Safe Identification Record (last page).

Save this manual and NEVER keep it inside the safe.

Overview of Your Safe

WELCOME!

Your new First Alert® Fire Theft Safe™ will provide years of safe and secure protection for your valuables, important documents and other personal items. All First Alert® safes are designed and built using the highest manufacturing standards to ensure maximum user satisfaction under a variety of conditions. With proper care, your First Alert® safe will provide “Peace of Mind” for many years to come.

Thank you and Enjoy!

The following list outlines the items and quantities of each included with your new safe. Please carefully check the list to confirm all items have been received. If any item is missing, then please contact Consumer Affairs

@ 1-800-223-8566.

Package Contents

All Models

1 First Alert® Firesafe

1Operation & Installation Guide

2Companion Entry Keys

Models 2054DF (only)

1 Bolt-Down Kit Including:

1 Mounting Template

4 Break-off Bolts

4 Washers

1 Removable Shelf

Models 2084DF / 2118DF (only)

1 Adjustable Shelf

4 Shelf Support Clips

Important: DO NOT RETURN SAFE TO STORE

If you are missing parts, have difficulty programming your safe or have any other questions pertaining to its proper use and care, DO NOT RETURN your safe to the store. Please contact Consumer Affairs at 1-800-223-8566 (USA & Canada) for assistance.

Home and Office Security Safes

1

 

 

Programming Preparation

Step 1. Installing Batteries

BATTERY

The digital keypad is powered by 4 “AA” batteries which COMPARTMENT must be installed before you can begin programming

your personal code. For your convenience, we have provided you with 4 “AA” batteries. For best results and depending on use, we recommend replacing the batteries at least once a year.

1.Locate battery compartment to the right of the digital keypad.

2.To open the compartment, press firmly in on the battery cover and slide it to the right for removal.

3.Install 4 new “AA” batteries in the battery compartment. Make sure they are installed in the correct direction as marked on the inside of the battery compartment.

4.Once the batteries are installed properly, replace the cover by sliding it back on from the left.

Important: BATTERY REMOVAL

If the batteries are removed or fail, the keypad memory will NOT be erased.

Step 2. Open Safe with Override Key (square top)

You will need access to the inside of the safe door to begin programming. You must use the Emergency Override Key (square top) to open the door for the first time.

1. Insert the Emergency Override Key (square top) in the

lock, turn to the left (counterclockwise) and pull the door open.

Important: TURN OVERRIDE KEY TO LEFT ONLY

When using the Emergency Override Key, you must ONLY TURN IT TO THE LEFT. Turning it to the right may cause key to become stuck in the cylinder and may cause damage to the lock.

2

Programming A Passcode

LCD Display Menu

Your new Digital Firesafe features an LCD display to assist in programming and operating your safe. A menu of the codes is as follows:

Ready to enter your passcode

Passcode successfully programmed

Correct passcode entered

Incorrect passcode entered

Batteries (“AA”) must be replaced

Step 3. Programming a Passcode

Use the digital keypad to program your own 3 to 8 digit passcode. You may choose or change your personal passcode at any time by following these steps:

1.Locate the memory button marked on the inside of the door.

2.Using a pen or other blunt tip, quickly push and release the memory button.

3.After you hear a “beep”, the LCD display will read “OPEN” and you may begin entering your personal code (from 3 to 8 numbers) followed by the # button.

4.Next, you will hear a longer “beep” and the

LCD display will read “CODE”, indicating that your personal code has been successfully programmed and can now be used to open your safe.

LCD

DISPLAY

MEMORY

BUTTON

Important: SECURITY LOCKOUT PERIODS

For added security, the safe will automatically “Lockout” entry for 5 minutes after three attempts to open with an invalid passcode. After three more invalid attempts within this time period, a one-hour “lockout” period will begin. During these “Lockout” periods, entry MUST BE MADE using the emergency override key.

Home and Office Security Safes

3

 

 

Loading...
+ 11 hidden pages