PAPER SHREDDER
Personal Series
MODELS
DM65C
PRODUCT USAGE GUIDE
|
DM65C |
Sheet capacity*: |
7 |
Shred type: |
Confetti |
Shred size: |
5/32" x 1-3/8" |
Entry width: |
9" |
Recommended use: |
25-50 shredding passes per day |
Maximum running time: |
10-12 min. on/20 minutes off |
*Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage. Different paper weights, humidity, and electrical currents will affect capacity.
PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT
Customer Service: 1-800-955-0959
USE AND CARE MANUAL
IMPORTANT SAFEGUARDS
•NEVER insert hands or fingers into paper entry as serious personal injury may result.
•THIS MACHINE IS NOT A TOY. Keep children and pets away from shredder AT ALL TIMES as serious injury may result. Always unplug shredder when not in use.
•Keep loose objects (jewelry, ties, long hair) away from shredder. These items and others like them may cause serious injury if they accidentally fall into the paper entry.
•Confetti cut shredders contain sharp edges on the underside of the machine. Use caution when positioning the shredder head onto the basket.
•Do not exceed recommended sheet capacity or usage.
•Do not shred plastic (except credit cards), continuous forms, adhesive labels, transparencies, newsprint, or cardboard.
•This personal shredder is intended for paper only. Do not attempt to shred large paper clips or other hard materials (except staples and small paper clips).
•Use only the power supply recommended on the product label.
•Do not place shredder near or over a heat source or water.
•Always turn off and unplug unit before moving or cleaning and when not in use.
•Do not insert aerosol cleaners into or around the shredder. Some agents may combust, causing serious injury.
•Never use flammable synthetic oil, petroleumbased or aerosol lubricants to oil the cutting blades. Some agents may combust, causing serious injury. Use only a recommended oil in a nonaerosol container. See "MAINTENANCE."
•Do not use this product if it or the cord has been damaged in any way.
•Do not open the cover for any reason. Doing so can expose you to dangerous voltages and will void your warranty.
Power Cord Care
•Place power cord in an easily accessible position, because it is the main disconnect switch.
•Do not place machine where adults, children or animals may walk on the cord.
•Do not rest anything on the power cord.
•If an extension cord is used, be sure that all products plugged into the extension cord do not exceed the extension cord ampere rating.
PARTS OF THE SHREDDER
C
B
A
A.Basket
B.Cabinet
C.Paper entry
D.Shredder head
D
E
F
G
E.Power switch
F.LEDs (red and green)
G.Viewer
ASSEMBLY
NOTE: This shredder will operate only when used with the supplied basket. The supplied basket has a built-in safety feature which prevents the shredder from operating if used with any other basket or if improperly assembled.
To assemble shredder:
Confetti cut shredders contain sharp edges on the underside of the shredder head. Use caution when positioning the shredder head onto the basket.
1.Position shredder head over cabinet. Place shredder head into top of cabinet as shown in Figure 1.
2.Firmly push down on four corners of shredder head to "lock" shredder head into position.
3.Push basket into shredder cabinet as shown in Figure 1. Push basket front in firmly so edges of basket/cabinet are aligned properly.
NOTE: To disassemble, pull out basket, place foot on bottom of cabinet, and firmly pull up on shredder head.
1 |
2 |
Loading...