Fellowes DM-6, PS60, Dm-c, Ps60cc, Dm-4 User Manual

...
0 (0)

Operating Instructions

Mode d’emploi

Instrucciones de funcionamiento

Bedienungsanleitung

Bedieningsinstructies

Istruzioni sul funzionamento

Models:

PS60

DM-C

 

PS60CC

DM-4

 

PS70

DM-6

 

PS75

 

 

PS80

 

A

B

C

D

E

F

Fellowes DM-6, PS60, Dm-c, Ps60cc, Dm-4 User Manual

A

B

C

D

E

F

2

Safety Instructions

Read and save these instructions.

Follow all warnings and instructions marked on the product.

Always turn off and unplug the machine before moving, cleaning, or conduct other than normal operation.

Operate shredder from the power source indicated on the serial label. If you are not sure of the type of power available, consult your dealer or a power company.

Power cord should be easily accessible because it serves as the disconnect switch. If the power cord is damaged, call the number listed under “Contact for Service”.

Keep loose objects (jewelry, ties, long hair) away from shredder.

CAUTION: Do not insert aerosol cleaners or lubricants into or around the machine. Some agents may combust, causing serious injury.

Empty wastebasket frequently.

Do not place shredder near water, over a radiator or a heat register.

Do not rest anything on the power cord. Do not place machine where people will walk on the cord.

The use of an extension cord is not recommended.

Do not service this product yourself. An opened cover may expose you to dangerous voltage points or other risks, and will void manufacturer’s warranty.

Do not exceed recommended sheet capacity or usage. (See “Sheet Capacity and Usage”, Table A).

Do not shred continuous forms.

Do not shred labels, transparencies, glossy paper, newsprint, plastic or cardboard.

Keep out of the reach of children and pets.

Never insert your hand or fingers into feed opening.

Practice caution when shredding paper that contains paper clips and staples. Shredder is intended for paper only. Although clips and staples will not harm the cutting system nor void the 5 year cutter warranty, the added thickness may decrease sheet capacity.

Installation

Assemble basket (and stand, if applicable). See diagrams on page 38-39.

Position shredder securely on basket.

All Models • Plug power cord into a standard AC outlet with the appropriate power requirements as stated on the serial number label adhered to the bottom of the shredder.

Operation

DM-4

• Follow instructions for sheet capacity. (See Table A)

• Position paper over entry.

DM-6

DM-C

• Depress power switch to the ON (I) position to start cutting system.

(without lights)

• Return the power switch to the OFF (O) position to stop cutting system.

 

 

 

PS60

• Follow instructions for sheet capacity. (See Table A)

PS60CC

• Depress the power switch to the ON (I) position to activate the standby

PS70

mode. *Green Ready light will come on.

PS75

• Shredder automatically starts when paper is placed in the entry and stops

PS80

when finished shredding.

DM-C

• If the machine is not properly seated on the basket, the red light will come

(with lights)

on.

Cleaning

• Unplug the unit from the wall before cleaning.

All Models • Housing can be cleaned with a cloth, dampened with a mild soap and water solution.

Sheet Capacity and Usage

Do not exceed recommended sheet capacity for your model.

Folding paper to fit the entry increases the thickness and recommended capacity may be exceeded.

Clips and staples increase the thickness and may decrease sheet capacity.

 

US 20# Paper

64 GSM

80 GSM

80 GSM

Model:

Sheets per Pass

Sheets per Pass

Sheets per Pass

Sheets per Pass

 

120V/50Hz

100V/50Hz

230V/50Hz

240V/50Hz

 

 

 

 

 

PS60

12

14

12

12

PS70

12

14

12

12

PS75

12

14

12

12

DM-4

12

N/A

N/A

N/A

DM-6

12

N/A

N/A

N/A

 

 

 

 

 

PS60CC

7

9

7

7

PS80

7

9

7

7

DM-C

7

N/A

N/A

N/A

 

 

 

 

 

TABLE A

Different paper weights and electrical currents will affect capacity.

A

B

C

D

E

F

3

Loading...
+ 4 hidden pages