Extron electronic RGB 560-Dual, RGB 508, RGB 500-Dual, RGB 568 User Manual

0 (0)
Extron electronic RGB 560-Dual, RGB 508, RGB 500-Dual, RGB 568 User Manual

User’s Manual

Extron Electronics, USA

1230 South Lewis Street, Anaheim, CA 92805

800.633.9876 714.491.1500 FAX 714.491.1517

USA

Extron Electronics, Europe

 

Extron Electronics, Asia

 

Extron Electronics Information

Beeldschermweg 6C, 3821 AH Amersfoort

 

135 Joo Seng Rd. #04-01, PM Industrial Bldg.

 

ExtronWEB: www.extron.com

+31.33.453.4040 FAX +31.33.453.4050

 

+65.383.4400 FAX +65.383.4664

 

ExtronFAX: 714.491.0192

The Netherlands

 

Singapore 368363

 

24-hour access—worldwide!

 

 

RGB 500/Dual, RGB 508, RGB 560/Dual, RGB 568

Architectural Series Universal Interfaces with Audio and ADSP

68-455-02 Printed in the USA

© 2001 Extron Electronics. All rights reserved.

Precautions

Safety Instructions • English

Warning

 

Thissymbolisintendedtoalert theuserofimportant operating and maintenance (servicing) instructions in the literature provided with the equipment.

This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock.

Caution

Read Instructions • Read and understand all safety and operating instructions before using the equipment.

Retain Instructions • The safety instructions should be kept for future reference.

Follow Warnings • Follow all warnings and instructions marked on the equipment or in the user information.

Avoid Attachments • Do not use tools or attachments that are not recommended by the equipment manufacturer because they may be hazardous.

Power sources • This equipment should be operated only from the power source indicated on the product. This equipment is intended to be used with a main power system with a grounded (neutral) conductor. The third (grounding) pin is a safety feature, do not attempt to bypass or disable it.

Power disconnection • To remove power from the equipment safely, remove all power cords from the rear of the equipment, or the desktop power module (if detachable), or from the power source receptacle (wall plug).

Power cord protection • Power cords should be routed so that they are not likely to be stepped on or pinched by items placed upon or against them.

Servicing • Refer all servicing to qualified service personnel. There are no userserviceable parts inside. To prevent the risk of shock, do not attempt to service this equipment yourself because opening or removing covers may expose you to dangerous voltage or other hazards.

Slots and openings • If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive components inside. These openings must never be blocked by other objects.

Lithium battery • There is a danger of explosion if battery is incorrectly replaced. Replace it only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

Consignes de Sécurité • Français

Ce symbole sert à avertir l’utilisateur que la documentation fournie avec le matériel contient des instructions importantes concernant l’exploitation et la maintenance (réparation).

Ce symbole sert à avertir l’utilisateur de la présence dansleboîtierde l’appareilde tensions dangereuses non isolées posant des risques d’électrocution.

Attention

Lire les instructions• Prendre connaissance de toutes les consignes de sécurité et d’exploitation avant d’utiliser le matériel.

Conserver les instructions• Ranger les consignes de sécurité afin de pouvoir les consulter à l’avenir.

Respecter les avertissements • Observer tous les avertissements et consignes marqués sur le matériel ou présentés dans la documentation utilisateur.

Eviter les pièces de fixation • Ne pas utiliser de pièces de fixation ni d’outils non recommandés par le fabricant du matériel car cela risquerait de poser certains dangers.

Avertissement

Alimentations• Ne faire fonctionner ce matériel qu’avec la source d’alimentation indiquée sur l’appareil. Ce matériel doit être utilisé avec une alimentation principale comportant un fil de terre (neutre). Le troisième contact (de mise à la terre) constitue un dispositif de sécurité : n’essayez pas de la contourner ni de la désactiver.

Déconnexion de l’alimentation• Pour mettre le matériel hors tension sans danger, déconnectez tous les cordons d’alimentation de l’arrière de l’appareil ou du module d’alimentation de bureau (s’il est amovible) ou encore de la prise secteur.

Protection du cordon d’alimentation • Acheminer les cordons d’alimentation de manière à ce que personne ne risque de marcher dessus et à ce qu’ils ne soient pas écrasés ou pincés par des objets.

Réparation-maintenanceFaire exécuter toutes les interventions de réparationmaintenance par un technicien qualifié. Aucun des éléments internes ne peut être réparé par l’utilisateur. Afin d’éviter tout danger d’électrocution, l’utilisateur ne doit pas essayer de procéder lui-même à ces opérations car l’ouverture ou le retrait des couvercles risquent de l’exposer à de hautes tensions et autres dangers.

Fentes et orifices • Si le boîtier de l’appareil comporte des fentes ou des orifices, ceux-ci servent à empêcher les composants internes sensibles de surchauffer. Ces ouvertures ne doivent jamais être bloquées par des objets.

Lithium Batterie • Il a danger d'explosion s'll y a remplacment incorrect de la batterie. Remplacer uniquement avec une batterie du meme type ou d'un ype equivalent recommande par le constructeur. Mettre au reut les batteries usagees conformement aux instructions du fabricant.

Sicherheitsanleitungen • Deutsch

Dieses Symbol soll den Benutzer auf wichtige Anleitungen zur Bedienung und Wartung (Instandhaltung) in der Dokumentation hinweisen, die im Lieferumfang dieses Gerätes enthalten ist.

DiesesSymbolsolldenBenutzerdaraufaufmerksam machen, daß im Inneren des Gehäuses dieses ProduktesgefährlicheSpannungen,dienichtisoliert sind und die einen elektrischen Schock verursachen können, herrschen.

Achtung

Lesen der Anleitungen • Bevor Sie das Gerät zum ersten Mal verwenden, sollten Sie alle Sicherheits-und Bedienungsanleitungen genau durchlesen und verstehen.

Aufbewahren der Anleitungen • Die Sicherheitsanleitungen sollten aufbewahrt werden, damit Sie später darauf zurückgreifen können.

Befolgen der Warnhinweise • Befolgen Sie alle Warnhinweise und Anleitungen auf dem Gerät oder in der Benutzerdokumentation.

Keine Zusatzgeräte • Verwenden Sie keine Werkzeuge oder Zusatzgeräte, die nicht ausdrücklich vom Hersteller empfohlen wurden, da diese eine Gefahrenquelle darstellen können.

Instrucciones de seguridad • Español

Este símbolo se utiliza para advertir al usuario sobre instrucciones importantes de operación y mantenimiento (o cambio de partes) que se desean destacar en el contenido de la documentación suministrada con los equipos.

Este símbolo se utiliza para advertir al usuario sobre la presencia de elementos con voltaje peligroso sin protección aislante, que puedan encontrarse dentro de la caja o alojamiento del producto, y que puedan representar riesgo de electrocución.

Precaucion

Leer las instrucciones • Leer y analizar todas las instrucciones de operación y seguridad, antes de usar el equipo.

Conservar las instrucciones • Conservar las instrucciones de seguridad para futura consulta.

Obedecer las advertencias • Todas las advertencias e instrucciones marcadas en el equipo o en la documentación del usuario, deben ser obedecidas.

Evitar el uso de accesorios • No usar herramientas o accesorios que no sean especificamente recomendados por el fabricante, ya que podrian implicar riesgos.

Vorsicht

Stromquellen • Dieses Gerät sollte nur über die auf dem Produkt angegebene Stromquelle betrieben werden. Dieses Gerät wurde für eine Verwendung mit einer Hauptstromleitung mit einem geerdeten (neutralen) Leiter konzipiert. Der dritte Stift oder Kontakt ist für einen Erdschluß, und stellt eine Sicherheitsfunktion dar und sollte nicht umgangen oder außer Betrieb gesetzt werden.

Stromunterbrechung • Um das Gerät auf sichere Weise vom Netz zu trennen, sollten Sie alle Netzkabeln aus der Rückseite des Gerätes oder aus dem DesktopStrommodul (falls dies möglich ist) oder aus der Wandsteckdose ziehen.

Schutz des Netzkabels • Netzkabel sollten stets so verlegt werden, daß sie nicht im Weg liegen und niemand darauf treten kann oder Objekte daraufoder unmittelbar dagegengestellt werden können.

Wartung • Alle Wartungsmaßnahmen sollten nur von qualifiziertem Servicepersonal durchgeführt werden. Im Inneren des Gerätes sind keine Teile enthalten, die vom Benutzer gewartet werden können. Zur Vermeidung eines elektrischen Schocks versuchen Sie in keinem Fall, dieses Gerät selbst zu warten, da beim Öffnen oder Entfernen der Abdeckungen die Gefahr eines elektrischen Schlags oder andere Gefahren bestehen.

Schlitze und Öffnungen • Wenn das Gerät Schlitze oder Löcher im Gehäuse aufweist, dienen diese zur Vermeidung einer Überhitzung der empfindlichen Teile im Inneren. Diese Öffnungen dürfen niemals von anderen Objekten blockiert werden.

Litium-BatterieExplosionsgefahr, falls die Batterie nicht richtig ersetzt wird. Ersetzen Sie nur durch diegleiche oder einen vergleichbaren Batterietyp, der auch vom Hersteller empfohlen wird. Entsorgung der verbrauchten Batterien bitte gemäß den Herstelleranweisungen.

Advertencia

Alimentación eléctrica • Este equipo debe conectarse únicamente a la fuente/tipo de alimentación eléctrica indicada en el mismo. La alimentación eléctrica de este equipo debe provenir de un sistema de distribución general con conductor neutro a tierra. La tercera pata (puesta a tierra) es una medida de seguridad, no puentearia ni eliminaria.

Desconexión de alimentación eléctrica • Para desconectar con seguridad la acometida de alimentación eléctrica al equipo, desenchufar todos los cables de alimentación en el panel trasero del equipo, o desenchufar el módulo de alimentación (si fuera independiente), o desenchufar el cable del receptáculo de la pared.

Protección del cables de alimentación • Los cables de alimentación eléctrica se deben instalar en lugares donde no sean pisados ni apretados por objetos que se puedan apoyar sobre ellos.

Reparaciones/mantenimiento • Solicitar siempre los servicios técnicos de personal calificado. En el interior no hay partes a las que el usuario deba acceder. Para evitar riesgo de electrocución, no intentar personalmente la reparación/ mantenimiento de este equipo, ya que al abrir o extraer las tapas puede quedar expuesto a voltajes peligrosos u otros riesgos.

Ranuras y aberturas • Si el equipo posee ranuras o orificios en su caja/alojamiento, es para evitar el sobrecalientamiento de componentes internos sensibles. Estas aberturas nunca se deben obstruir con otros objetos.

Batería de litio • Existe riesgo de explosión si esta batería se coloca en la posición incorrecta. Cambiar esta batería únicamente con el mismo tipo (o su equivalente) recomendado por el fabricante. Desachar las baterías usadas siguiendo las instrucciones del fabricante.

FCC Class A Notice

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

Extron’s Warranty

Extron Electronics warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electronics will, at its option, repair or replace said products or components, to whatever extent it shall deem necessary to restore said product to proper operating condition, provided that it is returned within the warranty period, with proof of purchase and description of malfunction to:

USA, Canada,

Europe, Africa, and

 

South America, and

the Middle East:

Asia:

Central America:

 

 

 

Extron Electronics, Europe

Extron Electronics, Asia

Extron Electronics

Beeldschermweg 6C

135 Joo Seng Road, #04-01

1230 South Lewis Street

3821 AH Amersfoort

PM Industrial Bldg.

Anaheim, CA 92805, USA

The Netherlands

Singapore 368363

This Limited Warranty does not apply if the fault has been caused by misuse, improper handling care, electrical or mechanical abuse, abnormal operating conditions or non-Extron authorized modification to the product.

If it has been determined that the product is defective, please call Extron and ask for an

Applications Engineer at (714) 491-1500 (USA), 31.33.453.4040 (Europe), or 65.383.4400

(Asia) to receive an RA# (Return Authorization number). This will begin the repair process as quickly as possible.

Units must be returned insured, with shipping charges prepaid. If not insured, you assume the risk of loss or damage during shipment. Returned units must include the serial number and a description of the problem, as well as the name of the person to contact in case there are any questions.

Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.

Please note that laws vary from state to state and country to country, and that some provisions of this warranty may not apply to you.

Table of Contents

Chapter 1 • Introduction ..........................................................

1-1

About this Manual ................................................................

1-2

About the RGB 500 Series Interfaces ..........................

1-2

Features ......................................................................................

1-2

RGB 500 Series features ........................................................

1-2

RGB 500, RGB 500 Dual, and RGB 508 feature ....................

1-3

RGB 500 Dual and RGB 560 Dual feature .............................

1-3

RGB 508 and RGB 560 feature ..............................................

1-3

RGB 560, RGB 560 Dual, and RGB 568 features ...................

1-3

Chapter 2 • Installation and Operation..........................

2-1

Installing the RGB 500 Series Interfaces................

2-2

Installation and Setup Overview ..................................

2-2

Installation and Operation Instructions ....................

2-3

Determining installation location .........................................

2-3

Preparing the installation site ...............................................

2-3

Installing the mounting bracket with clips ...........................

2-4

Installing the mounting bracket with screws .......................

2-4

Setting bottom and top panel switches ................................

2-5

Bottom panel features ...........................................................

2-6

Top panel jumper switches ....................................................

2-9

Attaching audio output, power & video output cables ......

2-10

Attaching adapter plates ....................................................

2-10

Setting front panel switches ...............................................

2-12

Front panel features — RGB 500 series, RGB 508 series ......

2-12

Front panel features — RGB 560 series, RGB 568 series ......

2-13

Connecting input cables .......................................................

2-15

Pre-installation testing/troubleshooting ............................

2-16

Mounting the interface to the mounting bracket .............

2-17

Attaching the faceplate ......................................................

2-18

Appendix A • Specifications .................................................

A-1

Appendix B • Rough-in Templates......................................

B-1

Appendix C • Dimensions ........................................................

C-1

RGB 500 and RGB 560 Faceplates..................................

C-2

RGB 500 Dual and RGB 560 Dual Faceplates ...........

C-3

(Continued)

RGB 500 Series • Table of Contents

i

Table of Contents, cont’d

RGB 508 and RGB 568 Faceplates..................................

C-4

Appendix D • Accessories and Part Numbers...........

D-1

Interfaces ..................................................................................

D-2

Power Supply ..........................................................................

D-3

Optional Adapter Plates ...................................................

D-3

Single Type Connector Architectural Adapter Plates ..........

D-4

Multi Type Connector Architectural Adapter Plates ...........

D-6

Cables .........................................................................................

D-7

Other Accessories .................................................................

D-9

All trademarks mentioned in this manual are the properties of their respective owners.

68-455-02 A Printed in the USA 04 01

RGB 500 Series

Chapter1One

Introduction

About this Manual

About the RGB 500 Series Interfaces

Features

ii RGB 500 Series • Table of Contents

Introductionroduction, cont’d

About this Manual

This manual contains information about the Extron RGB 500 architectural series universal interfaces (RGB 500, RGB 500 Dual, RGB 508, RGB 560, RGB 560 Dual, and RGB 568) and on how to operate and configure them.

About the RGB 500 Series Interfaces

The RGB 500 Series interfaces are universal, analog, computervideo interfaces with 300 MHz (-3dB) video bandwidth. The series features Extron’s ADSP™ (Advanced Digital Sync Processing™) to ensure stable sync signal output, while allowing trouble-free centering control.

Features

RGB 500 Series features

All RGB 500 Series interfaces provide the following features:

Wall and furniture mountability — The RGB 500 Series interfaces can be easily installed in any wall or hard surface, such as a podium, desk, or tabletop, using few tools. Wall studs are not needed for installation.

Digital sync processing — Using regular sync processing to allow centering control (H-shift) can create problems with some digital display devices as a result of the sync delay. Extron’s ADSP™ (Advanced Digital Sync Processing™) restores a stable sync signal, while allowing centering control. The RGB 500 Series interfaces also provide another option, DDSP™ (Digital Display Sync Processing™), to ensure proper displays without altering sync pulse timing or width. It may be selected via a bottom panel DIP switch.

Horizontal shift control — Adjust horizontal centering via a front panel knob.

RGBHV, RGBS or RGsB outputs — Select the output format via bottom panel DIP switches.

Serration pulse switch — This DIP switch-selectable feature adds or strips the serration pulses from the signal to make it compatible with digital display devices. Use the serration pulse switch if flagging or bending occurs at the top of the video display.

Gain/peaking adjustment — Output gain and peaking levels may be adjusted individually for red, green and blue channels by using jumpers that are accessible through the top of the enclosure.

Sync polarity adjustment — Horizontal and vertical sync output can either follow input sync polarity, or outgoing sync can be forced to negative via jumper settings.

Vertical sync pulse width adjustment — Vertical sync pulse width can be adjusted via jumper settings.

Autopower — When a signal is present at the video/sync input, the interface will power on, and the green LED on the front panel will light.

Stereo audio — All RGB 500 Series interfaces accept unbalanced stereo audio and output balanced or unbalanced stereo audio.

Choice of colors — The RGB 500 Series interfaces are available with a choice of gray, black or white faceplates to blend into a variety of installations.

RGB 500, RGB 500 Dual, and RGB 508 feature

Video input termination selection switch — A front panel toggle switch provides a way to switch between high Z and 75 ohm video input termination on these models. Select the video termination impedance that

provides the best picture. Set this switch to High Z if a local monitor is connected, a laptop breakout cable is used, or if the picture is too dark. Set this switch to 75 ohms if no local monitor is connected or if the picture is too bright or blooming (unterminated).

RGB 500 Dual and RGB 560 Dual feature

Two interfaces — The Dual models feature two interfaces with one integrated faceplate.

RGB 508 and RGB 568 feature

Connector adapter plates — The RGB 508 and RGB 568 offer the ability to attach up to four optional adapter plates for user-configurable pass-through connectors.

RGB 560, RGB 560 Dual, and RGB 568 features

Local monitor output connector — A 15-pin HD female local monitor connector on the front panel simplifies connections to a local display without the need for monitor breakout cables.

ID bit termination switch — These models feature front panel DIP switches to make ID bit termination easy. Use this feature if no local monitor is connected.

1-2

RGB 500 Series • Introduction

RGB 500 Series • Introduction

1-3

Introduction, cont’d

Local monitor pins — These DIP switches are used for routing local monitor signals for Macintosh 13” monitors and all other Mac/VGA-type monitors.

RGB 500 Series

Chapter2Two

Installation and Operation

Installing the RGB 500 Series Interfaces

Installation and Setup Overview

Installation and Operation Instructions

1-4 RGB 500 Series • Introduction

Instaltal lationandandOperation,cont’d

Installing the RGB 500 Series Interfaces

The Extron RGB 500 Series interfaces consist of a faceplate, an interface (or interfaces) in a metal enclosure, and wall mounting brackets. The RGB 508 and RGB 568 series interfaces may also include optional connector adapter plates. Installation hardware is included with each interface.

Installation and Setup Overview

This is an overview of how to install the wall-mounted interfaces. These steps are covered in detail in this chapter.

To install and set up the RGB 500 Series interfaces for basic operation, follow these basic steps:

1Determine the installation location.

2Prepare the site for installation. Use the supplied template to mark the rough-in cutout, then cut out the wallboard or wood.

3Install the mounting bracket.

4Set the bottom panel DIP and jumper switches and top panel gain/peaking adjustment jumpers. These items will be inaccessible after installation.

5Attach the audio output, video output and power cables to the interface.

6Attach any optional adapter plates, and attach output cables to the back sides of the adapter plates.

7Set the front panel video termination toggle switch (RGB 500 and RGB 508 series models) or the front panel DIP switches (RGB 560 and RGB 568 models).

8Temporarily connect the computer video and audio input cables and (for RGB 560 and RGB 568 models) the local monitor output cable. Connect any cables whose signals will be routed through the optional adaptor pass-through plates.

9Connect power cables to the input and output devices. Turn on the input and output devices.

10The image should now display on screen. If it does not display, or if the picture displays incorrectly, double check and make adjustments to cables, DIP switches and jumpers as needed. See the “Pre-installation testing/ troubleshooting” section in this chapter.

11Temporarily disconnect the computer video and audio input cables and (for RGB 560 and RGB 568 models) the local monitor output cable from the front panel of the interface.

12Mount the interface to the mounting bracket.

13Attach the faceplate to the interface and mounting bracket.

14Reconnect the computer video and audio input cables and the local monitor output cable (for RGB 560 and RGB 568 models) to the interface, and readjust horizontal centering as needed via the front panel knob.

Installation and Operation Instructions

Determining installation location

Select an installation site. The mounting bracket may be installed in a wall using backing clips or may be installed on a hard surface, such as a podium, desk, tabletop, or hardwood wall, using wood/metal screws. Take cabling and power availability into consideration.

The RGB 500 Series interfaces do not require attachment to wall studs, so they may be placed almost anywhere on a wall.

Preparing the installation site

Actual size rough-in templates for each model are provided in Appendix B. Use them as guides to mark and cut the hole in the wall or furniture through which the interface will be installed. The innermost line represents the opening where material will be removed and the mounting bracket will be installed.

1.Cut out the center portion (up to the guidelines) of the rough-in template supplied with the mounting bracket.

2.Place the template on the wall or surface where the interface will be installed. Use a soft pencil to mark the guidelines for the opening on the wall.

3.Cut out the material from the rough-in area with a jigsaw or small hand saw.

4.Check the opening size by inserting the mounting bracket into the opening. The flat portion should lay snugly on the wall or surface, and the tabs through which the screws will be inserted should fit easily into the opening. There should not be noticeable play within the opening.

5.If needed, use a saw, file or sandpaper to enlarge the hole. Smooth the edges of the opening to avoid damage or

2-2

RGB 500 Series • Installation and Operation

RGB 500 Series • Installation and Operation

2-3

Installation and Operation, cont’d

injury to yourself or the cables during installation.

Installing the mounting bracket with clips

1.Place 1¼” (3.18 cm) long or ¾“ (1.9 cm), #6-32 machine screws (provided) through the holes in each corner of the mounting bracket. Use the shortest screw required. Loosely fasten (using 2-3 turns) a mounting backing clip on the end of each screw.

2.Insert the mounting bracket into the opening in the wall.

Backing Clip can

Backing Clip can

be in either orientation.

be in either orientation.

See Detail A or Detail B.

See Detail A or Detail B.

 

Mounting Bracket

Mounting Bracket

 

Installing the mounting bracket with backing clips

3.Rotate each clip so the tab will be behind the plywood, wallboard/sheet rock or other surface to hold the bracket snugly in place when the screw is tightened. See Detail A and Detail B.

Wall Material

Wall Material

Backing Clip

Backing Clip

0.75" #6-32 Screw

1.25" #6-32 Screw

Mounting Bracket

Mounting Bracket

Detail A

Detail B

Backing clip orientations

4.Use a Phillips screwdriver to hand tighten the screws to fasten the mounting bracket in place.

Installing the mounting bracket with screws

Use this installation method if the installation surface is a sturdy, dense material such as sheet metal, plywood, or hard wood.

1.Insert the mounting bracket into the opening in the wall and hold it firmly in place.

2.Mark the locations of the outermost/corner bracket holes on the installation surface.

3.If desired, remove the mounting bracket and drill ¼” deep pilot holes (half the width of the shaft of the screw) at the marked locations.

2-4 RGB 500 Series • Installation and Operation

4.Insert the bracket back into the hole.

5.Use four ½” (1.3 cm) long, #6 flat headed wood screws (provided) or self-tapping sheet metal screws to fasten the bracket directly onto wood or metal, respectively. Hand tighten the screws. See the illustration below.

Mounting Bracket

Mounting Bracket

Installing the mounting bracket with screws

Setting bottom and top panel switches

Because the top and bottom panels on all models will be inaccessible after installation, the DIP and jumper switches must be set before the interface is installed into the wall, furniture or raceway. Use the switch explanations to help you configure these switches.

Set the DIP switches to either On (closed) or Off (open) to select the desired function as described in the features section.

The DIP switches may be either the rocking type or the sliding type.

To set rocking-type DIP switches, use a small

1

2

3

4

screwdriver to depress the appropriate end of

 

 

 

 

 

 

 

 

the switch.

1

2

3

4

 

To set the sliding type of DIP switches, use a small screwdriver to slide (push) the switch to the desired position (On/closed or Off/open).

To configure jumper switches, use a needlenosed plier to reach through the openings in the enclosure and pull the jumper shunt out/off the pins, then place the jumper on the appropriate pins, as shown below.

Changing jumper settings

RGB 500 Series • Installation and Operation

2-5

Loading...
+ 18 hidden pages