EVGA 132-BL-E758 User Manual

Size:
1.13 Mb
Download

Control

Sense CPU Fan Header

12V

Ground

Ground 12V Sense

Fan Header

8 Pin 12v Power

24 Pin ATX Power

Ground 12V Sense

Fan Header

Post LED

SATA Port

 

Connector

 

 

Pin

Signal

IDE Channel

 

Front Audio Connector

1

PORT1_L

 

 

 

 

 

 

 

 

2

AUD_GND

 

 

2

4

6

8

10

 

3

PORT1_R

 

 

 

 

 

 

 

 

4

PRECENCE J

 

 

 

 

 

 

 

 

5

PORT2_R

 

 

 

 

 

 

 

 

6

SENSE1_RETURN

 

 

 

 

 

 

 

 

7

SENSE_SEND

RX-

TX-

1

3

5

7

9

 

8

Empty

 

RX+

TX+

 

9

PORT2_L

 

 

 

 

 

 

GND GND

GND

 

 

 

 

 

 

10

SENSE2_RETURN

 

 

 

 

 

 

 

 

 

 

 

Connector

Pin Definition

SATA Ports

 

 

 

 

SPDIF

1

Power

 

 

 

 

 

 

 

 

 

2

4

6

2

No Pin

 

 

 

 

 

3

SPDIF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

SPDIFI

 

 

 

 

 

 

 

 

5

GROUND

 

 

 

 

 

1

3

5

6

GROUND

 

 

 

 

 

 

 

 

 

 

PC Speaker

 

 

CMOS

 

 

 

 

Fan

 

 

 

PWRLED

PWRSW Blank

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+

-

 

 

 

 

 

 

 

 

 

 

 

 

 

Header

 

 

 

 

 

 

 

 

 

 

 

Power

 

 

 

 

 

 

 

 

 

 

 

 

 

Serial

 

 

 

 

 

 

 

 

 

2

 

 

10

 

 

 

 

 

Button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

 

 

 

1

 

 

9

 

 

 

 

 

 

Button

 

 

 

 

 

Ground

Ground

+

-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12V

12V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HD_LED

RESET

No

 

 

 

 

 

 

 

 

 

 

 

Sense

Sense

 

 

 

Connector

 

Pin

Signal

 

 

 

 

 

 

 

 

 

Connect

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IEEE 1394a Connector

1

TPA+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

TPA-

 

 

 

 

 

 

 

 

 

 

 

 

 

2

4

6

8

10

3

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

TPB+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

TPB-

 

Connector

 

Pin

Signal

Pin

Signal

 

 

 

 

 

 

 

 

 

7

+ 12V

USB 2.0 Header Connector

1

5V_DUAL

2

5V_DUAL

 

 

 

 

1 3 5 7 9

8

+ 12V

1

3

5

7

9

3

D-

4

D-

 

 

 

 

9

Empty

 

 

 

 

 

5

D+

6

D+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

GND

8

GND

 

 

 

 

 

 

 

 

 

10

GND

 

 

 

 

 

9

Empty

10

No Connect

 

 

 

 

 

 

 

 

 

 

 

2

4

6

8

10

 

 

 

 

 

 

 

 

Please see the manual for more details.

1

4

6

8

 

 

 

 

 

 

 

 

 

 

2

3

5

2

7

 

 

2

 

9

 

1.

PS/2 Keyboard Port

 

6.

IEEE1394a (Firewire) Port

 

2.

USB 2.0 Ports

 

7. e-SATAPort

 

 

3.

Clear CMOS

 

8.

LAN Ports (10/100/1000)

 

4.

Coaxial SPDIF Output

9.

Audio Ports

 

 

5.

Optical SPDIF Output

 

 

 

 

 

1 3 5

2 4 6

One DIMM:If using 1 DIMM (Single Channel), install into: DIMM slot 1.

Two or Four DIMMs:If using 2 DIMMs (Dual Channel), install into: DIMM slots 1 and 3. If using 4 DIMMs (Dual Channel), install into: DIMM slots 2, 1, 4, and 3.

Three DIMMs:If using 3 DIMMs (Triple Channel), install into: DIMM slots 1, 3, and 5.

Six DIMMs: If using more than 4 DIMMs, use:

DIMM slots 2, 1, 4, and 3 then proceed to occupy the following DIMM slots in this order: 5 and 6.

ATTENTION:

EVGA recommends applying1.65V or less when setting the DIMM Voltage. This will support long term stability.

Premium Services

dvanced RMA

Stepping-UpYour Customer Service

Limited Lifetime Warranty

upon product registration

Support

Thank you for purchasing an EVGA product. Please remember to register your product at: www.evga.com/register

For the latest drivers and updates for your product please visit: www.evga.com/support/drivers

To visit and search our knowledge base and product FAQ please visit: www.evga.com/FAQ

To visit the EVGA community message boards please visit: forums.evga.com

For more information about these services

as well as our terms and conditions please visit www.evga.com

EVGA Corp. 2900 Saturn Street, Suite B Brea, CA 92821

Color info : CMYK

Please match colors to:

PMS © Orange 021

PMS © 485 c

PMS © Yellow c

PMS © Hexachrome Green

PMS © Process Cyan

K 100%

K 85%

The following quick steps will guide you through testing the absolute bare minimum essentials of your motherboard before installing it into a system chassis. Visual aids are provided to assist you during the following procedures.

To reduce the risk of fire, electric shock, and injury always follow basic safety precautions. It is recommended that you use electrostatic discharge (ESD) countermeasures such as an ESD wrist strap or anti-staticmat when handling computer components.

After removing the EVGA X58 SLITM from its packaging, place it on to a nonconductive surface. For example: wood, cardboard box, or ananti-staticmat.

1

2

a.

b.

c.

a.

b.

c.

Unhook the socket lever and lift up the load plate. Remove the 1366 protective cover and carefully install your Intel processor making sure to properly align the notches. Close the load plate and with light pressure, lower the socket lever back in to its original position.

Apply a small, pea-sizeddrop of thermal paste on to the middle of the processor. Install your processor heatsink and fan.

3

 

b.

 

 

4

a.

b.

a.

 

 

Plug in one keyboard into a USB port or PS/2 port.

Install one stick of system memory (DIMM) into the appropriate DIMM slot (see other side).

5

b.

6

a.

b.

a.

c.

d.

Insert your graphics card into either the PCI-E2.0 slot or the PCI slot. The type of slot depends on the graphic card bus type. Connect a monitor to the output connector of the graphics card.

7

a.

b

c.

d.

 

9

 

Plug in power connectors to both the graphics card and the hard disk drive. Power connector types will vary

a.

b.

depending on the hard disk drive and graphic card’s power requirements.

 

 

Press the onboard Clear CMOS button

Press the green Power Button

On the power supply, flip the power switch to the ON position. LEDs will now be lit on the motherboard. Press the onboard Clear CMOS button once then press the green Power Button to begin powering up the system.

At this final stage, you should now be greeted with the POST screen on your monitor.

Make sure your power supply’s power switch is in the OFF position then connect your 24-PinATX Power Connector and8-PinCPU Power Connector to the motherboard.

SATA Connection

8

a.

b.

IDE Connection

c.

d.

Connect one hard drive disk to either one of the SATA Connectors or to the IDE Connector depending on the hard disk drive connection type.

Color info : CMYK

Please match colors to:

PMS © 371

PMS © 375

PMS © Orange 021

K 100%

K 85%