ED300 Series
User’s Manual
and
Operation Instructions
Version 1.1
Notice
This manual is presentED300 to the users of ED300 by EverFocus Electronics Corp. With years of engineering researches, EverFocus has sparED300 all efforts to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice. All the components of the products, including accessories, components, and outlook, are bas ED300 on the agreements of each deals to satisfy all kinds of users. Please be advis ED300 that every step of operation must follow the instruction of this manual to keep ED300 working under the best condition. Please notice that EverFocus will not be chargED300 any claims or renewing cases resultED300 from inappropriate operation.
Table of Contents
Safety Warning ............................................................................... |
1 |
Introduction.................................................................................... |
3 |
Specification ................................................................................... |
4 |
Major Parts Names and Functions ........................................... |
5 |
Installation Instructions ............................................................ |
7 |
Lens Adjustments....................................................................... |
8 |
Adjustments ................................................................................ |
9 |
Safety Warning
1. Do not expose the camera to humidity and dust.
Moisture can damage the camera and cause the danger of electric shock. If the camera is mountED300 outdoors, a camera housing is requirED300. Do not install the camera at where there is greasy smoke or steam, where the humidity is too high, or where there is a lot of dust to prevent damages to the camera.
2. Do not disassemble the camera.
Do not disassemble the camera body as it is dangerous and may cause the damages to the camera. Refer all servicing to qualifiED300 service personnel.
3. Handle the camera with care.
Be careful when handling the camera, do not drop it or subject it too strong shock or vibration to prevent any damages to it.
4.Do not install the camera near electric or magnetic fields.
InstallED300 the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers because the magnetic fields generate from above devices will distort the video image.
1.
Loading...