Estate ETW4400W User Manual

0 (0)
Estate ETW4400W User Manual

Top Load Washer

PRODUCT MODEL NUMBERS

OVERALL DIMENSIONS

27"

251/2"

ETW4100S, ETW4400V, ETW4400W

 

 

(686 mm)

(648 mm)

 

 

 

 

 

 

 

Electrical: A 120 volt, 60 Hz., AC only,

 

 

42"

 

15or 20-amp, fused electrical supply is required.

 

 

(1067 mm)

 

A time-delay fuse or circuit breaker is recommended.

 

 

 

 

It is recommended that a separate circuit serving

 

 

 

 

only this appliance be provided.

 

 

 

 

RECESSED AREA OR CLOSET INSTALLATION

 

DRAIN SYSTEM OPTIONS

 

For closet installation, with a door, the minimum ventilation openings in

Wall standpipe drain system

 

the top and bottom of the door are required. Louvered doors with

 

 

 

equivalent air ventilation openings are acceptable.

 

 

 

 

3"

 

 

 

 

(76 mm)

 

 

 

 

14" max.

 

48 in.2

 

(310 cm2)

(356 mm)

 

 

 

 

19"

 

 

(483 mm)

 

 

 

24 in.2

4"

 

(155 cm2)

(102 mm)

 

 

0"

1"

3"

(25 mm)

(0 mm)

 

(76 mm)

Floor drain system

Minimum diameter for a wall or floor standpipe drain: 2" (51 mm). Minimum carry-away" capacity: 17 gal (64L) per minute. Top of" standpipe must be at least 39 (991 mm) high; install no higher than 96 (2.4 m) from bottom of washer. A sump pump system is required for higher installations.

Laundry tub drain system

Minimum" capacity: 20 gal (76 L). Top of laundry tub" must be at least 39 (991 mm) above floor; install no higher than 96 (2.4 m) from bottom of washer.

Floor drain system

Floor drain systems require a Siphon Break Kit (Part No. 280129)

and" additional drain hose (Part No. 3357090). Minimum siphon break: 28 (711 mm) from bottom of washer. Additional hoses might be needed.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. W10200890-D-ES

Instructions packed with product. Specifications subject to change without notice.

06/2009

Loading...