Escalade Sports M01505 User Manual

Size:
6.1 Mb
Download

We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product,

DO NOT RETURN IT TO THE STORE, please contact us toll free @:

1-888-996-2729FAX:1-866-873-3535

arcadegames@escaladesports.com

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade Sports please provide your model number, serial number (if applicable), and part number if requesting a replacement part. These numbers are located on the product, packaging, and in this owners manual.

Your Model Number M01505

© 2005 Escalade Sports

1

For Customer Service Call 1-888-996-2729

IMPORTANT! READ THIS MANUAL ALL THE

WAY THROUGH BEFORE BEGINNING TO

PUT YOUR GAME TABLE TOGETHER! THEN

READ EACH STEP BEFORE STARTING

THAT STEP.

TWO (2)ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Wrenches H9 and H10 included with the game

Hex Wrench H13 Included with the Hardware Kit

Philips Screwdriver

Furniture Polish and Cloth

Assembly Tips

Make sure you understand the following tips before you begin to assemble your Rod Hockey table.

1.When installing parts that have more than one bolt, start ALL the bolts in that part by hand before tightening anything.

2.Some drawings or images in this manual may not look exactly like your product. Please read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

2

3.5mm

(6)

M4

(2)

M4

(2)

M4

(2)

M6

(16)

M6

r (16)

3.5mm

(4)

(1)

ch(1

3mm (4) H11 3.5mm (10) H12 3.5mmcrew(10)

H13 3.5mm

(4)

H14 3mm

(2) H15-4.0mmPlastic Nail(8)

© 2005 Escalade Sports

3

For Customer Service Call 1-888-996-2729

(1)

(2)

(2)

 

(2)

(2)

(2)

(2)

P8 - Player Rod E (2)

(10)

(10)

(10)

(10)

(4)

(2)

(1)

 

P16 - Short Stick Player Red (4)

P17 - Goalie Red (1)

P18 - Long Stick Player Blue (1)

P19 - Short Stick Player Blue (4)

P20Goalie Blue (1)

P21 - Support Brace (1)

P22 - Scorer (2)

P23-PVCApron Mantle (2)

P24-PVCTop Mantle (2)

(4)

c 2005 Escalade Sports

5

For Customer Service Call 1-888-996-2729

1.Find a clean, level place to begin the assembly of your game table. We recommend building the unit on the box top to protect the parts during assembly.

2.Place the main cabinet P1 up side down as shown inFIGURE 1.

3.Attach the goalie handle P3 to the main cabinet using boltH2, two washersH4 and lock nutH3. Do not over tighten, the handle must be able to pivot.

4.Attach the puck catcher P2 to the cabinet using screwsH1 as shown in

FIGURE 1.

5.Repeat steps 3 and 4 for both ends of the table.

Figure 1

6

6.From the bottom of the table insert a gear assembly P11 into each player groove. You want the playfield between the two flat tabs on the gear. You do this by putting the tabs into the player groove and then turning the entire assembly so it faces the rod it will be attached to. SeeRod Assemby Detail.

7.See FIGURE 2 for player rod layout.

8.Next push the gear assembly into the corresponding rod and attach with screw H11. Also attach the rod stopperP12 to the rod with screwH11.

9.Slide one rubber stopper P10onto each rod from outside of the main cabinet. Slide a rod handleP9 on the rod after the rubber stopper.

H12 H11 12

11

8

E

9

10

Figure 2

 

8

E

© 2005 Escalade Sports

7

For Customer Service Call 1-888-996-2729

10.Attach the support brace P21 to the main cabinet with screwsH7 as shown.

11.Attach the legs P13 to the main cabinet using boltsH5 and washersH6.

12.Tighten all hardware at this time.

H7

Screw

 

P13

 

 

Leg

H6

 

 

P21

H5

Washer

Bolt

 

Support

P13

 

Brace

 

 

Leg

 

H6

Washer

Figure 3

H5

Bolt

 

THIS STEP REQUIRES TWO OR MORE ADULTS.

VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY.

8

14.Attach the goal P14 to each end of the table with screwH13as shown in

FIGURE 4.

15.Attach the scorers P22 to the table using screwsH10.

H10

Screws

 

P14

 

Goal

P22

H13

Scorer

Screw

Figure 4

© 2005 Escalade Sports

9

For Customer Service Call 1-888-996-2729

15.Slide the players onto the metal tabs on the gear assemblies. Set the players as shown below in FIGURE 5. Note that there is one long stick blue player and one long stick red player. These must be placed as shown for the game to function correctly.

P17

Red

Goalie

P16

Short Stick

P18 Red Player

Long Stick

Blue Player

P19

Short Stick

Blue Player

P20

Blue Goalie

H14 Bolt

P15

Long Stick

Red Player

Figure 5

10