Escalade Sports 2L-7007-00 User Manual

Size:
54.47 Kb
Download

ver 5/16/05 HM

6 x 6 SANDBOX COVER

 

 

 

 

 

 

 

 

 

 

ChildLife Inc.

 

CONTENTS:

 

 

 

 

 

 

EscaladeSports®

 

1 Sandbox Cover

 

 

P.O. Box 889

 

 

 

Evansville,IN47706

 

1 Bag of 12 Snaps

 

 

TollFree

(800) GO-SWING

 

1 Instructions

 

 

 

or (800) 467-9464

 

(on reverse)

 

 

Fax

(866) 873-3537

 

 

 

E-mail

childlifecs@escaladesports.com

 

 

 

 

HomePage

childlife.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BOX

For All ChildLife®

6 x 6 Sandboxes

75

 

 

 

 

 

 

Item # 52653 *52653*

2L-7007-00

6x6 Sandbox Cover Installation Instructions

Unfold Sandbox Cover and note “snap backs” that have been fastened along the edges. You will be screwing 12 “snap studs” (provided) into the Sandbox with a Phillips head screwdriver. The result will be a Sandbox Cover that can easily be fastened and unfastened.

See illustration below. Center and place the Sandbox Cover over the Sandbox. Mark the location of each “snap stud” to be installed by tapping the head of the “snap backs” very gently with a hammer, leaving a small identifying mark. Make pilot holes at the marked locations and screw the “snap studs” in until the base is flush with the wood. There are 3 snap-studson each end and side.

Always install the “snap studs” so that the Sandbox Cover will be straight and taut when it is in place. This will result in a neat and trim appearance, and the fabric will wear better if it is tight.

ALWAYS put enough sand in your Sandbox so that the Sandbox Cover is resting on the sand when it is in place. If you do not, children will walk or crawl on the Sandbox Cover and tear the “snap backs” out of the fabric. Your Sandbox Cover isNOT designed to bear the weight of a child; damage to your Sandbox Cover as a result of installing it on a sandbox that does not have enough sand in it isNOT covered under warranty.

Sandbox Cover rolls up for easy storage with tie-upstraps at one end.