Emerson CKS1850C User Manual

0 (0)

e m e r s o n

Dual Alarm AM/FM Clock Radio

with SmartSet®

Automatic Time Setting System

and Sure Alarm

(U.S. Patent No. 6,567,344)

OWNER’S MANUAL

CKS1850C

CKS1851C

CAUTION

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

A

The lightning flash with arrow­ head symbol, within an equi­

lateral triangle

is

intended to

alert the user

to

the presence

of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

 

 

RISK OF ELECTRIC SHOCK

 

 

 

A

 

 

 

 

DO NOT OPEN

 

 

 

 

 

 

WARNING: TO

REDUCE THE

The

 

 

 

 

 

 

 

 

 

 

 

exclamation

point within

RISK

OF

ELECTRIC

SHOCK

an equilateral triangle Is In­

DO

NOT

REMOVE

COVER

tended

to

alert

the

user

to

(OR

B A C K ) ,

N O

U S E R

the

 

presence

of

Important

SERVICEABLE

PARTS

INSIDE

operating

and

maintenance

R E F E R S E R V I C I N G T O

(servicing)

Instructions

In

the

 

literature

accompany­

Q U A L I F I E D

S E R V I C E

 

 

 

 

 

 

 

 

ing the appliance.

PERSONNEL.

The Caution Marking maybe located at the bottom enclosure of the apparatus.

IMPORTANTSAFETYINSTRUCTIONS

1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.

2.) Do not use this apparatus near water.

3.) Clean only with dry cloth.

4.) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong Is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

8.) Only use attachments / accessories specified by the manufacturer.

9.) Unplug this apparatus during lightning storms or when unused for long periods of time.

10.) Refer all servicing to qualified service personnel. Servicing Is required when the apparatus has been damaged In any way, such as power-supply cord or plug Is damaged, liquid has been spilled or objects have fallen Into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.

12.) Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid Injury from tip-over.

13.) Do not overload wall outlet. Use only power source as indicated.

14.) Use replacement parts as specified by the manufacturer.

15.) The product may be mounted to a wall only if recommended by the manufacturer.

16.) Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.

1

Congratulations!

And thank you for purchasing the SmartSet® Clock Radio from Emerson Research. SmartSet® is the world's first and only LED clock radio that will automatically set itself to the correct Year”, ‘Month’, ‘Date’, ‘Da/, and ‘Time’ as soon as you plug it in. The only thing you have to do is tell the SmartSet® what time zone you are in, and the built in computer does everything else for you immediately. And not only the first time, but every time the power is interrupted as well.

We all know how annoying it is to wake up in the morning and see the dreaded flashing “12:00” display on our clocks or clock radios. This means that your power was interrupted some time during the night while you were sleeping and your clock doesn’t know what time it is anymore. Unfortunately it probably also means that you are late for work, or for school, again. But with your SmartSet Clock Radio the dreaded flashing “12:00” display is a thing of the past. The SmartSet® resets itself as soon as the power is restored and gets you up on time, every time.

And if that isn’t enough, the SmartSet® computer also knows when Daylight Saving Time begins and ends and it will adjust itself for those changes automatically through 2099! Leap Years too! And best of all, the long life lithium battery backup battery is already installed in your radio. You don’t have to remember to put a new 9-volt battery in your radio every 6 months. Under normal circumstances the lithium battery can last for up to 5 years, and when It does need to be changed, a low battery indicator will come on to let you know. The CR2430 lithium battery is available almost anywhere that batteries are sold.

The SmartSet® also gives you dual alarms that can be set to go off on weekdays only, weekends only, or all 7 days. You can set one alarm to wake you up to buzzer Monday through Friday when you have to get up early, and use the second alarm to wake you up to soft music on Saturday and Sunday when you can sleep In.

Someday all clocks and clock radios may be this smart. But today the technology is only available from Emerson Research.

We’re sure you’ll be happy and amazed by your SmartSet® Clock Radio, and that it will give you many years of enjoyment and dependable service.

Once again, all of us at Emerson Research.thank you for your purchase.

IMPORTANT NOTES

'Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat.placeslackingventilationordusty areas, places subject to constant vibration and/or humid or moist areas.

Operate controls and switches as described in the manual.

Before turning on the power, make certain that the power cord is properly installed.

When moving the set, be sure tofirst disconnect the AC power cord.

IMPORTANT

Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away from the affected radio/television tuner.

NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television operation (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

PREPARATION FOR USE

UNPACKING AND SET UP

Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit.

Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.

Note the serial number on the bottom of your radio and write this number in the space provided on Warranty Page of this manual.

Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.

Unwind the AC power cord and extend it to its full length. The FM antenna is built in to this cord. It must be fully extended to provide the best FM reception.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture.

POWER SOURCE

This radio is designed to operate on normai 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You couid cause damage to the radio that is not covered by your warranty.

This radio shouid be connected to an AC outiet that is aiways ‘live’. Do not connect it to an outiet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the radio connected to a ‘live’ AC outlet at all times.

You will note that this system is equipped with a polarized AC power plug having one blade wider than the other. This is a safety feature. If this plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fit into your outlet, you probably have an out-dated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician.

SURE ALARM BATTERY BACK-UP SYSTEM

This SmartSet” Clock Radio includes a Sure Alarm battery back-up circuit that can wake you up even if the power is ‘Off at the selected wake up time. If your power is ‘Off’ at the selected wake up time the clock display will be off and the radio will not operate, but a separate mini-buzzer will turn ‘On’ automatically to wake you up, even if you had selected the “Wake to Radio” option. The Sure Alarm will sound for between 30 to 60 seconds and then shut off automatically.

To stop the Sure Alarm buzzer immediately, press the RADIO ON/OFF button. Pressing the SNOOZE button has no effect during Sure Alarm operation.

NOTE: In order to maximize the life of the built in lithium battery, piease be sure to set the ALARM 1 and ALARM 2 switches to the “OFF” position if the radio will be disconnected from the AC outlet for more than a few hours. This will prevent the Sure Alarm from turning ‘On’ unecessarily.

Emerson CKS1850C User Manual

LOCATION OF CONTROLS AND INDICATORS

17

-19

21

27

Loading...
+ 15 hidden pages