Washer extractors
W3180M, W3250M, W3330M
Features and benefits
•Frequency-controlled motor ensure flexibility in wash and extraction action
•Good dewatering ability thank´s to higher G-force compared with a traditional solid mount machine
•Solid mount construction with robust frame in galvanized steel
•Low water consumption, up to 12 liter/kg dry linen (60°C without pre-wash). Depending on application
•Available with two types of program controls:
-Exacta Control(R) microprocessor with up to 28 fixed wash program combinations. Some parameters
programmable
-Clarus Control fully programmable microprocessor, up to 192 programs
•Large door opening for easy loading/unloading
•Stainless and galvanized steel in all vital parts for high degree of rust protection
•Prepared for manual or automatic detergent supply
•Front panel in green and side panels in grey colour
Main options
•Stainless steel front and/or side panels
•Dual drain valves for water re-use (Clarus Control)
Main specifications |
|
|
W3180M |
W3250M |
W3330M |
||||
Rated capacity, |
filling factor 1:10 |
|
kg/lb |
18/40 |
25/55 |
33/73 |
|||
|
filling factor 1:13 |
|
kg/lb |
13.8/30 |
19/42 |
25/60 |
|||
Drum, |
volume |
|
litre |
180 |
|
250 |
|
|
330 |
|
diameter |
|
ø mm |
650 |
|
725 |
|
|
795 |
Extraction |
|
|
rpm |
619 |
|
587 |
|
|
561 |
G-factor |
|
|
|
140 |
|
140 |
|
|
140 |
Heating alternatives |
electricity |
kW |
13 |
|
18 |
|
|
23 |
|
|
|
steam |
|
x |
|
x |
|
|
x |
|
|
non-heated |
|
x |
|
x |
|
|
x |
Consumption data ”Normal 60°C” 1:10 * |
|
El |
Steam |
El |
Steam |
El |
Steam |
||
Total time |
|
|
min |
46 |
** |
47 |
** |
45 |
** |
Water consumption (cold/hot) |
|
litre |
187/33 |
187/33 |
266/46 |
266/46 |
350/60 |
350/60 |
|
Energy consumption (motor/heating)* |
kWh |
0.45/1.25 |
0.45 |
0.6/1.75 |
0.6 |
0.7/2.3 |
0.7 |
||
Steam consumption |
|
kg |
- |
1.9 |
- |
2.6 |
- |
3.45 |
*Water temperature 15°C cold water and 65°C hot water.
**Depending on steam pressure.
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.