XLC-127, XLC-127+,
XLCi-127, XLCi-127+
3-Way, High-Output
Compact Line-Array
Element
Key Features:
•Control with Predictability
•Compact, Lightweight
•Fast, Simple Integrated Rigging
•Bi-Amp or Tri-Amp Operation
•True 3-Way Design
•LAPS Aiming Software
•120° Horizontal Full-Range Line-Array
•DH2T-16, or ND6-16 HF Options
•Quik-RigTM or Fixed Installation Rigging
GeneralDescription:
EV engineers have defined a new group of compact line array elements, the XLC. It is comprised of three components, XLC 127 full range, XLC 127+ full range with ND6-16 large format high frequency transducers and the XLC 118 sub cabinet. The XLC 127 is a 3-way design utilizing a 12" vented LF, 2 x 6.5" MB transducers on a 120° horizontal waveguide, and 2 x DH2T-16 HF transducers combining through a Hydra to a 120° x 7° waveguide. The XLC 127 can be used in tri-amp mode, or bi-amp 3-way using the sophisticated internal passive MB to HF network. The asymmetrical box design was optimized to produce a symmetrical polar pattern with a uniform power response. Designed for use in groups of four or more the XLC 127 delivers predictability and control. Combined with an advanced integrated rigging system, one-man installations are a reality. The XLC 127 systems can also be ground stacked. Ideal for applications ranging from live reinforcement to performing arts venues to houses of worship, to sports facilities, XLC gives you the power to make it happen. The XLC 127+ uses two ND6-16, 3 in., high-output, neodymium compression drivers, replacing the standard DH2T-16 drivers. The XLC 127+ is recommended when performance requirements demand higher output. The ND6-16 is also used in EV’s X-Array and X-Line systems creating a family of identically voiced loudspeakers for any mobile or permanent sound application. XLC can deliver unprecedented performance, particularly in difficult acoustical environments. LAPS modeling software provides quick results for array configurations and rigging information.
Technical Specifications:
|
XLC-127 |
XLC-127+ |
Freq. Response1 (-3 dB): |
65 Hz-18 kHz |
|
|
|
|
Freq. Range1 (-10 dB): |
50 Hz-20 kHz |
|
|
|
|
Max Calculated SPL1 : |
135 dB Cont., 141 dB Pk |
|
|
|
|
Horizontal Coverage: |
120° |
|
|
|
|
Vertical Coverage: |
Array Dependant, Software Definable |
|
|
|
|
Rigging (Both Types): |
Fully Captive Aluminum, 1° increments, |
|
|
16 elements with 8 to 1 Safety Factor |
|
LF Power Handling: |
300W Cont., 1200W Peak |
|
|
|
|
MB Power Handling: |
200W Cont., 800W Peak |
|
|
|
|
HF Power Handling: |
80W Cont., |
150W Cont., |
|
320W Peak |
600W Peak |
Biamp MB/HF Power |
200W Cont., 800W Peak |
|
Handling: |
|
|
Sensitivity(LF/MB/HF)1 : |
95/101/110 dB |
|
LF to MB crossover Freq: |
500 Hz |
|
MB to HF crossover Freq: |
1600 Hz (Passive or Active) |
|
|
|
|
LF Passband: |
1 x 12" DL12ST, 8 ohms |
|
Recommended Amplifier: |
EV P2000 |
|
MB Passband: |
2 x 6.5" DM65, 8 ohms, |
|
Recommended Amplifier: |
EV P2000 |
|
HF Passband: |
2 x DH2T-16, |
2 x ND6-16, |
|
8 ohms |
8 ohms, |
Recommended Amplifier: |
EV P2000 |
EV P2000 |
Biamp MB/HF Passband: |
8 ohms, |
|
Recommended Amplifier: |
EV P2000 |
|
Connectors: |
2 x NL8 |
|
|
|
|
Enclosure Material: |
13-ply birch plywood w/Futura |
|
Grille: |
Zinc plated steel with powdercoat paint |
|
|
|
|
Environmental Spec: |
IEC 529 IP24, MIL 810 |
|
Quik-RigTM Dim (HxWxD): |
14.25" x 39" x 22.5" |
|
|
(362 x 990 x 572 mm) |
|
Install Dim (HxWxD): |
14.25" x 36.5" x 22.5" |
|
|
(362 x 927 x 572 mm) |
|
Net Weight (Quik-RigTM): |
116 lbs (52.7 kg) |
111 lbs (50.4 kg) |
(Install): |
111 lbs (50.4 kg) |
106 lbs (48.1 kg) |
Shipping Weight |
|
|
(Quik-RigTM): |
121 lbs (55.0 kg) |
116 lbs (52.7 kg) |
(Install): |
116 lbs (52.7 kg) |
111 lbs (50.4 kg) |
1 Full Space Measurement of 4 Elements.
Loading...